Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MCP1703T-5002E/MB by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronic devices or IoT sensors.
Median Price
$0.710
Lifecycle Status
Suppliers In-Stock
19
In-Stock Inventory
1k+
Arrow
1+ parts
100+ parts
$0.677
1k+ parts
$0.644
10k+ parts
-
DigiKey
$0.750
$0.560
Microchip Technology
$0.520
$0.490
Newark
$0.773
Distrelec
$0.805
Element14
$0.626
$0.598
Master Electronics
$0.549
$0.542
Verical
$0.708
Farnell
$0.482
$0.472
Nova Conductors
$0.657
Ozdisan Elektronik
$0.716
Maritex
$1.024
$0.539
$0.413
Chip Stock
NexGen Digital
Vyrian
IBS Electronics
$0.770
$0.755
Martec Srl
Bristol Electronics
Atlantic Semiconductor
Ampacity Inc.
$0.377
Semicontronic
$0.464
$0.452
$0.450
Vigor
$0.570
Continental Prestige Electronics
$0.604
$0.455
$0.446
Argo Parts USA
$0.614
$0.596
Bastille Electronics
$0.624
$0.593
$0.585
Advanced Electronics
$2.453
$2.331
Corohmni
$3.321
Modulus Dynamics
$4.097
Aztec Data Supply Inc.
$8.160
RC Electronics
A-Z Elektronik GmbH
Lixinc
West Coast Incorporated
Authorized Procurement Solutions
Robosynatics
Lucentia Tech
$5.064
$4.960
Assy Fe
Epart123
$9.620
Plastic and epoxy material provides durability and reliability to the product, ensuring long-lasting performance.
Low dropout voltage helps in efficient power conversion, minimizing wasted energy and heat dissipation.
Surface mount capability makes it easier to integrate into circuit boards, saving space and simplifying assembly.
Wide operating temperature range allows for use in various environmental conditions without compromising performance.
CMOS technology provides high precision and low power consumption, making the regulator efficient and reliable.
Stable output voltage ensures consistent power supply to connected devices, preventing fluctuations and potential damage.
Low line regulation maintains constant output voltage despite fluctuations in input voltage, ensuring stable performance.
Fixed positive LDO regulator provides a regulated output voltage with low dropout, making it ideal for sensitive electronics.
High output current capacity allows the regulator to power multiple components or devices without overload or overheating.
High input voltage tolerance provides flexibility and compatibility with a wide range of power sources, ensuring versatile usage.
Fixed Regulators - Positive Single Output LDO MCP1703T-5002E/MB attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Microchip Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Screening Level:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
MCP1703T-5002E/MB Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - MCP1703 14/Sep/2022
PCN Packaging - Label and Packing Changes 23/Sep/2015 Packing Changes 10/Oct/2016
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
2N7002-7-F
SPC TECHNOLOGY/ MULTICOMP
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Form: GULL WING; Package Shape: RECTANGULAR;
BAV99
Kingwell Technonlogy
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
LL4148
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WT
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vishay Telefunken
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
1N4148WS
Weitron Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
2N2222A
Texas Instruments
2N2222A by Texas Instruments is a small signal NPN bipolar junction transistor (BJT) with a max collector-emitter voltage of 40V and a max collector current of 0.8A. It is commonly used for switching applications due to its fast turn on/off times (35ns/285ns) and high transition frequency (300MHz).
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
LM2936M-3.3
National Semiconductor
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 3 %;
LT1763CS8-1.5#TRPBF
Analog Devices
Analog Devices' LT1763CS8-1.5#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 1.5V and max output current of 0.5A. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from -40°C to 125°C. Ideal for applications requiring precise voltage regulation in compact electronic devices.
LD39200PU33R
STMicroelectronics
LD39200PU33R by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 2A and a nominal output voltage of 3.3V. It has a small outline package style, making it suitable for applications requiring precise voltage regulation in compact spaces. With an operating temperature range from -40°C to 125°C, it is ideal for various electronic devices where stable power supply is crucial.
TLV1117-33CDCY
TLV1117-33CDCY by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3 V and max dropout voltage of 1.3 V. It operates at temperatures ranging from 0 to 125 °C and has a max output current of 0.8 A, making it ideal for various electronic applications requiring stable voltage regulation in compact designs.
LT3032EDE#PBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 14; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; Moisture Sensitivity Level (MSL): 1;
LM2936HVMA-5.0/NOPB
LM2936HVMA-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.05A max output current, and 3% max voltage tolerance. Ideal for applications requiring stable power supply in a compact package, such as IoT devices or portable electronics.
TPS73733DRVR
TPS73733DRVR by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, this regulator is ideal for space-constrained designs that demand high performance and reliability.
TPS73633DBVTG4
TPS73633DBVTG4 by Texas Instruments is a fixed positive single output LDO regulator with a max dropout voltage of 0.2V and a max output current of 0.4A. It is commonly used in applications that require stable and regulated power supply, such as consumer electronics and industrial equipment.
LM1117LDX-1.8/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
LP2985A-33DBVRG4
Texas Instruments LP2985A-33DBVRG4 is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It has a small outline package style, suitable for applications requiring low dropout voltage and precise voltage regulation in a compact design. Operating temperature range from -40 to 125°C makes it ideal for various electronic devices.
SPX1117M3-L-3.3/TR
Maxlinear
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Maximum Input Voltage: 10 V;
LT1129IST-3.3#PBF
LT1129IST-3.3#PBF by Analog Devices is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.7A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MCP1703T-5002E/CBVAO
MCP1703T-5002E/CBVAO by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in automotive electronics, industrial controls, and consumer devices.
LP2980IM5-5.0/NOPB
LP2980IM5-5.0/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.05A max output current, and 3.5% max voltage tolerance. Ideal for applications requiring stable voltage regulation in compact spaces with operating temperatures ranging from -40 to 125°C.
LT1763CS8-3.3#PBF
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.4 %;
LD1117S50TR
LD1117S50TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 1.2V. It operates at an adjustable temperature range from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LM1117IDT-3.3/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 2; Package Code: TO-252; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2 %;
LP2985AIM5-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3.5 %;
LM2931AD50R
LM2931AD50R by STMicroelectronics is a fixed positive single output LDO regulator with 5V nominal output voltage. It has a max dropout voltage of 0.6V and can handle up to 0.1A output current. Ideal for applications requiring stable voltage regulation in compact spaces.
MCP1700T-3302E/TT
MCP1700T-3302E/TT by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It operates in the temperature range of -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MCP1702T-3302E/CB
MCP1702T-3302E/CB by Microchip Technology is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MCP1804T-3302I/OT
MCP1804T-3302I/OT by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 1.7V max dropout voltage, and 0.15A max output current. It is ideal for applications requiring stable voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
MCP1702T-3302E/MB
MCP1702T-3302E/MB by Microchip Tech is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MCP1700T-3302E/MB
MCP1700T-3302E/MB by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 0.25 A and a nominal output voltage of 3.3 V. It is commonly used in applications requiring stable voltage regulation, such as automotive electronics and industrial control systems.
MCP1703T-3302E/CB
MCP1703T-3302E/CB by Microchip Technology is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It has a small outline, low profile package style with matte tin terminal finish, suitable for applications requiring precise voltage regulation in compact spaces at temperatures ranging from -40 to 125°C.
MCP1703T-3302E/MB
MCP1703T-3302E/MB by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. With a small outline package style and surface mount capability, it offers efficient performance with minimal footprint.
MCP1825S-3302E/DB
MCP1825S-3302E/DB by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.5A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MCP1826S-3302E/DB
MCP1826S-3302E/DB by Microchip is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 1A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MCP1703T-3302E/DB
MCP1703T-3302E/DB by Microchip Technology is a fixed positive single output LDO regulator with a max output current of 0.25 A and a nominal output voltage of 3.3 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for microcontrollers or sensors.
MCP1703AT-5002E/CB
MCP1703AT-5002E/CB by Microchip is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 2% Max Voltage Tolerance. It is ideal for applications requiring stable voltage regulation in a compact form factor, such as portable electronics and IoT devices.
MCP1703-3302E/DB
MCP1703-3302E/DB by Microchip is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
MCP1700T-3302E/TTVAO
MCP1700T-3302E/TTVAO by Microchip: LDO regulator with 3.3V output, 0.25A max current, and 3% voltage tolerance. Ideal for automotive applications due to AEC-Q100 screening and TS 16949 compliance. Small outline package with dual terminals and matte tin finish.
MCP1702T-3302E/CBVAO
MCP1702T-3302E/CBVAO by Microchip is a 3.3V Fixed Positive Single Output LDO Regulator with 0.25A max output current and 3% voltage tolerance. Ideal for applications requiring low dropout voltage, it operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic devices.
MCP1703T-3302E/CBVAO
MCP1703T-3302E/CBVAO by Microchip Technology is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 125 °C. Ideal for applications requiring stable voltage regulation in automotive electronics or industrial equipment.
MCP1702T-5002E/CB
MCP1702T-5002E/CB by Microchip Technology is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.25A Max Output Current, and 0.65V Max Dropout Voltage. It is ideal for applications requiring stable voltage regulation in compact spaces with limited input voltage range.
MCP1703T-5002E/CB
MCP1703T-5002E/CB by Microchip is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.25A max output current. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount assembly.
MCP1702T-5002E/MB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOT-89; Terminal Form: FLAT; Maximum Input Voltage Absolute: 14.5 V; Maximum Voltage Tolerance: 2 %;
MCP1703AT-3302E/MB
MCP1703AT-3302E/MB by Microchip Technology is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.25A. It has a small outline, low profile package style and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
MCP1703T-4502E/MB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: FLAT; Maximum Input Voltage Absolute: 18 V; Maximum Voltage Tolerance: 2 %; Terminal Pitch: 1.5 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved