Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Microchip's DSC1001DI1-033.3330 is a 33.333 MHz XO Clock Oscillator with 50% frequency stability, 3.3V supply voltage, and CMOS oscillator type. Ideal for applications requiring precise timing in a compact form factor, it features a max rise time of 2ms and operates b/w -40°C to 85°C.
Median Price
$0.858
Lifecycle Status
Suppliers In-Stock
8
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.620
100+ parts
$0.600
1k+ parts
$0.583
10k+ parts
-
Mouser Electronics
$0.750
Newark
$0.967
Verical
$1.176
$1.127
Avnet
NAC Semi
$0.740
$0.670
Nova Conductors
$0.929
Vyrian
Semicontronic
$0.640
$0.624
$0.621
Argo Parts USA
Continental Prestige Electronics
$0.910
Netroflash
Ampacity Inc.
$0.980
Aztec Data Supply Inc.
$1.580
Corohmni
$3.221
Perfect Parts
RGB Technical Solutions
The 50% frequency stability ensures consistent and reliable performance over time, making it a dependable choice for precision applications.
The specified output load ensures that the oscillator can drive standard loads with ease, making it compatible with a wide range of circuits.
The 3.3 V supply voltage is a common standard in many electronic systems, ensuring easy integration with existing designs.
The CMOS oscillator type offers low power consumption and high noise immunity, making it suitable for battery-powered devices and noise-sensitive applications.
The 4 terminals provide a secure connection and simple integration into the PCB, enhancing the overall reliability and ease of installation.
The fast rise time of 2 ms ensures quick signal transitions, making it suitable for high-speed communication and data processing applications.
The compact size of the oscillator allows for efficient use of board space, making it ideal for space-constrained designs or applications.
The high maximum operating temperature of 85°C enables the oscillator to withstand harsh environmental conditions, increasing its reliability in challenging environments.
The low minimum operating temperature of -40°C allows the oscillator to function in cold environments, making it suitable for a variety of operating conditions.
The nickel palladium gold finish provides excellent conductivity and corrosion resistance, ensuring long-term performance and durability.
The precise operating frequency of 33.333 MHz makes the oscillator suitable for applications requiring accurate timing and synchronization.
The fast fall time of 2 ns ensures quick signal transitions, improving the overall performance and reliability of the oscillator.
The specified symmetry of 55/45 ensures balanced signal duty cycles, making it suitable for applications requiring precise timing and symmetry.
The surface mounting feature simplifies the installation process and allows for automated assembly, making it ideal for high-volume production.
XO Clock Oscillators DSC1001DI1-033.3330 attributes and parameters. Explore more XO Clock Oscillators devices from Microchip Technology
Additional Features:
Maximum Fall Time:
Frequency Adjustment (Mechanical):
Frequency Stability:
JESD-609 Code:
Mounting Feature:
No. of Terminals:
Nominal Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Output Load:
Physical Dimension:
Maximum Rise Time:
Nominal Supply Voltage:
Maximum Symmetry (%):
Terminal Finish:
DSC1001DI1-033.3330 Oscillators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
BAV99
Toshiba
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
E8WSDC12-32.768KTR
Abracon
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
1N4148
Digitron Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
SMBJ18CA
Brightking
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
Formosa Microsemi
BAV99W-7-F
Diodes Incorporated
Diodes Incorporated BAV99W-7-F is a fast recovery rectifier diode with 2 elements in series connected, center tap configuration. It has a max reverse recovery time of 0.004 us and can handle a max output current of 0.15 A. Ideal for applications requiring fast switching capabilities and operating temperatures ranging from -65 to 150 °C.
STM32F401CDY6TR
STMicroelectronics
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
Yangzhou Yangjie Electronics
World Products
DS18B20U
Maxim Integrated
DS18B20U by Maxim Integrated is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Vishay Intertechnology
Vishay Intertechnology's BAV99 diode features a max forward voltage of 1.3V and a max output current of 0.15A, making it ideal for rectification applications. With a small outline package style and dual terminal position, this series-connected diode is designed for surface mount usage in various electronic circuits with an operating temperature range from -55°C to 150°C.
Protek Devices
540BAA150M000BAGR
Skyworks Solutions
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 20 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
X1G004171003100
Seiko Epson
X1G004171003100 by Seiko Epson is a CMOS XO Clock Oscillator with 24 MHz frequency, 50% stability, and 3.6V max supply voltage. Ideal for applications requiring precise timing in a compact form factor, such as IoT devices and communication systems.
SG-210STF12.0000ML3
SG-210STF12.0000ML3 by Seiko Epson is a 12 MHz XO Clock Oscillator with 50% frequency stability, 15 pF output load, and CMOS oscillator type. Ideal for applications requiring precise timing in a compact form factor. Operating temperature range from -40°C to 85°C makes it suitable for various electronic devices.
DSC1001CI2-100.0000T
Microchip Technology
DSC1001CI2-100.0000T by Microchip: XO Clock Oscillator with 25% freq stability, 3.3V supply, and 100MHz operating frequency. Ideal for applications requiring precise timing in electronics.
ASFLMB-12.288MHZ-LC-T
Abracon's ASFLMB-12.288MHZ-LC-T is a 12.288MHz XO Clock Oscillator with 50% frequency stability, CMOS technology, and 15pF output load. Ideal for applications requiring precise timing in a compact form factor such as IoT devices, wearables, and communication equipment.
SG-210STF12.0000ML0
CMOS; Terminal Finish: GOLD; JESD-609 Code: e4;
ASAK2-32.768KHZ-L-R-S-T
Abracon's ASAK2-32.768KHZ-L-R-S-T XO Clock Oscillator operates at 0.032768 MHz with 25% frequency stability, LVCMOS type, and 15 pF output load. Ideal for applications requiring precise timing in a compact 2.0mm x 1.6mm x 0.7mm package for surface mounting feature.
LTC6991IS6#TRPBF
Linear Technology
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 5.5 V; Minimum Supply Voltage: 2.25 V;
KC3225K25.0000C10E00
KYOCERA AVX
KC3225K25.0000C10E00 by KYOCERA AVX is a 25 MHz XO Clock Oscillator with 50% frequency stability, CMOS type, and 15 pF output load. It operates b/w -10°C to 70°C, has a max supply voltage of 3.63 V, and requires only 5 mA max supply current. Ideal for applications requiring precise timing in compact electronic devices.
510PCA100M000BAG
Silicon Labs
CMOS; Power Supplies (V): 2.5; JESD-609 Code: e4; Qualification: Not Qualified; Terminal Finish: Gold (Au) - with Nickel (Ni) barrier;
ASDMB-1.0000MHZ-XY-T
Abracon's ASDMB-1.0000MHZ-XY-T is a 1MHz XO Clock Oscillator with 10% frequency stability, CMOS type, and 3.3V supply voltage. Ideal for applications requiring precise timing in compact designs with surface mounting feature.
LTC6995IS6-2#TRMPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 22000 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
AK5DAF1-100.0000T2
AK5DAF1-100.0000T2 by Abracon is a 100 MHz XO Clock Oscillator with LVDS oscillator type and 25% frequency stability. It has a max supply voltage of 3.63 V and is suitable for surface mount applications.
ASA-26.000MHZ-L-T
Abracon's ASA-26.000MHZ-L-T is a 26MHz XO Clock Oscillator with 50% frequency stability, HCMOS type, and 3.63V max supply voltage. Ideal for applications requiring precise timing in temperature range of -40 to 85°C, it features surface mounting and compact size of 2mm x 1.6mm x 0.7mm.
DSC1123DL5-200.0000
Microchip Technology's DSC1123DL5-200.0000 is a 200 MHz LVDS XO Clock Oscillator with 10% frequency stability, suitable for applications requiring high-speed and precise timing. It operates within -40 to 105 °C temperature range, with a supply voltage of 2.25V to 3.63V and output load of 100 OHM, making it ideal for various electronic systems.
MXO45HST-3C-4M9152
Cts
MXO45HST-3C-4M9152 by Cts is a 4.9152 MHz XO Clock Oscillator with HCMOS/TTL type, 50% frequency stability, and 5.5V max supply voltage. Ideal for applications requiring precise timing in environments ranging from -20°C to 70°C.
ASEMB-16.000MHZ-LC-T
ASEMB-16.000MHZ-LC-T by Abracon is a 16 MHz XO Clock Oscillator with a frequency stability of 50%. It has a max operating temperature of 85°C and is suitable for surface mount applications.
LTC6908IDCB-1#TRPBF
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 40 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Voltage: 5.5 V;
CB3LV-3I-25M0000-T
CB3LV-3I-25M0000-T by Cts is a 25 MHz XO Clock Oscillator with 50% Frequency Stability, 3.6V Max Supply Voltage, and 50pF Output Load. Ideal for applications requiring precise timing in electronics with CMOS/TTL oscillators.
SG-3030JC32.7680KB3
SG-3030JC32.7680KB3 by Seiko Epson is a CMOS XO Clock Oscillator with 120% frequency stability, 15 pF output load, and 0.002 mA max supply current. Ideal for applications requiring precise timing in temperature range of -20 to 70 °C, with dimensions of 10.5mm x 5mm x 2.7mm for surface mount installation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
DSC1001CL5-040.0000
DSC1001CL5-040.0000 by Microchip Tech is a CMOS XO Clock Oscillator with 40MHz freq, 10% stability, and 3.3V supply voltage. Ideal for applications requiring precise timing in temp range -40 to 105°C, it features surface mounting and nickel palladium gold terminal finish.
DSC1001AE5-040.0000
Microchip Technology's DSC1001AE5-040.0000 is a 40 MHz XO Clock Oscillator with 10% frequency stability and AEC-Q100 screening for automotive applications. It operates at 3.3V, consumes 12.2mA max supply current, and has a compact size of 7.0mm x 5.0mm x 0.9mm suitable for surface mounting in various electronic devices.
DSC1123AE2-300.0000
DSC1123AE2-300.0000 by Microchip Technology is a 300 MHz LVDS XO Clock Oscillator with 25% frequency stability, suitable for applications requiring precise timing. It operates b/w -20°C to 70°C, with a supply voltage range of 2.25V to 3.63V and features a compact size of 7.0mm x 5.0mm x 0.9mm for surface mount installations.
DSC1001CC1-125.0000T
DSC1001CC1-125.0000T by Microchip Technology is a 125 MHz XO Clock Oscillator with 50% frequency stability and AEC-Q100 screening level. It operates at a nominal voltage of 3.3V, suitable for applications requiring precise timing in automotive electronics and industrial control systems.
DSC1001CC1-125.0000
DSC1001CC1-125.0000 by Microchip Technology is a 125 MHz XO Clock Oscillator with 50% frequency stability, suitable for AEC-Q100 applications. It operates at a nominal voltage of 3.3V and has a max supply current of 12.2mA, making it ideal for automotive and industrial electronics requiring precise timing.
DSC1001DI1-033.3300
DSC1001DI1-033.3300 by Microchip Technology is a CMOS XO Clock Oscillator with 3.3V supply voltage, 33.33 MHz frequency, and 50% stability. Ideal for applications requiring precise timing in temperature range of -40 to 85°C with surface mounting feature.
DSC1123CE1-125.0000
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 0.85mm;
Micrel
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Supply Current: 22 mA;
Discera
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Output Load: 100 OHM;
DSC1123CE1-125.0000 by Microchip Technology is a 125 MHz LVDS XO Clock Oscillator with 50% frequency stability. It operates b/w -20°C to 70°C, has a supply voltage range of 2.25V to 3.6V, and consumes up to 22mA current. Ideal for applications requiring precise timing in compact electronic devices due to its small size and surface mount feature.
Ael Crystals
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 70 Cel;
DSC1123CI2-125.0000T
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Maximum Operating Temperature: 85 Cel;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Nominal Operating Frequency: 125 MHz;
LVDS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; Physical Dimension: 3.2mm x 2.5mm x 0.85mm;
DSC1001CL2-100.0000T
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 25 %; Frequency Adjustment (Mechanical): NO; JESD-609 Code: e4;
DSC1001DI1-025.0000T
CMOS; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Frequency Stability: 50 %; Frequency Adjustment (Mechanical): NO; Minimum Operating Temperature: -40 Cel;
DSC1001CL2-100.0000
DSC1001CL2-100.0000 by Microchip Technology is a CMOS XO Clock Oscillator with 25% frequency stability, 3.3V supply voltage, and 100MHz operating frequency. It has a compact size of 3.2mm x 2.5mm x 0.85mm and is ideal for applications requiring precise timing in temperature-sensitive environments such as telecommunications and networking equipment.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved