Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Microchip's ATSAME53J20A-MF is a 32-bit microcontroller with Cortex-M4F CPU, 1048576 ROM words, and 262144 RAM words. It features 16 ADC channels, 2 DAC channels, and 13 timers. Ideal for automotive applications due to AEC-Q100 screening level and -40 to 125 °C operating temperature range.
Median Price
$8.200
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Microchip Technology
1+ parts
100+ parts
$6.810
1k+ parts
$6.260
10k+ parts
$5.960
Mouser Electronics
-
Nova Conductors
$7.067
NAC Semi
$8.510
$7.720
$7.060
Vyrian
VNN
Semicontronic
$6.800
$6.630
$6.596
Ampacity Inc.
Corohmni
Continental Prestige Electronics
$7.438
$7.290
Netroflash
Microchip USA
$20.460
$20.170
$20.020
$19.880
Aztec Data Supply Inc.
$31.860
Argo Parts USA
West Coast Incorporated
Having integrated cache helps in improving the overall performance of the microcontroller by reducing access time to frequently used data and instructions.
With a high maximum clock frequency, this microcontroller can handle tasks at a faster rate, making it suitable for applications that require quick processing.
The microcontroller being RISC (Reduced Instruction Set Computing) based ensures efficient and quick execution of instructions, leading to improved performance.
The wide range of connectivity options available make this microcontroller versatile and suitable for a variety of applications requiring different communication protocols.
Having a large RAM capacity allows for storing and accessing a significant amount of data in the microcontroller, enabling it to handle complex algorithms efficiently.
The presence of DAC channels enables the microcontroller to generate analog output signals, making it suitable for applications such as audio processing and sensor interfacing.
Having ADC channels allows the microcontroller to convert analog signals from the external world into digital data for processing, making it suitable for sensor data acquisition applications.
The presence of multiple timers in the microcontroller enables precise timing control for various functions such as PWM generation and event counting, enhancing its versatility.
Microcontrollers ATSAME53J20A-MF attributes and parameters. Explore more Microcontrollers devices from Microchip Technology
ADC Channels:
Address Bus Width:
Bit Size:
Boundary Scan:
CPU Family:
Maximum Clock Frequency:
DAC Channels:
DMA Channels:
External Data Bus Width:
Format:
Integrated Cache:
JESD-30 Code:
JESD-609 Code:
Length:
Low Power Mode:
No. of DMA Channels:
No. of External Interrupts:
No. of I/O Lines:
No. of Terminals:
No. of Timers:
On Chip Data RAM Width:
On Chip Program ROM Width:
Maximum Operating Temperature:
Minimum Operating Temperature:
PWM Channels:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
RAM Bytes:
RAM Words:
ROM Words:
ROM Programmability:
Screening Level:
Maximum Seated Height:
Speed:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
Surface Mount:
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
Peripheral IC Type:
Data EEPROM Size:
Connectivity:
Peripherals:
Analog To Digital Convertors:
Digital To Analog Convertors:
ATSAME53J20A-MF Peripheral ICs trade compliance attributes, and parameters.
ECCN
5A992.C
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
PCN Design/Specification - SAM D5X/E5X 05/May/2020 SAM D5X/E5X 08/Jan/2021
PCN Packaging - MBB/Label Chgs 16/Nov/2018
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
KSZ9031RNXIA
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
AT90CAN128-16AUR
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
2N7002
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
EPCS4SI8N
Intel
EPCS4SI8N by Intel is a small outline flash memory with 512Kx8 organization, operating at 3.3V. It features a max clock frequency of 40MHz and endurance of 100k write/erase cycles. Ideal for industrial applications requiring configuration memory with serial interface and low standby current consumption.
BAV99-7-F
Multicomp Pro
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20Z/T&R
Maxim Integrated
DS18B20Z/T&R by Maxim Integrated is a 12-bit digital temperature sensor with a max supply voltage of 5.5V and an accuracy of 0.50°C. It features a 1-Wire interface, operates b/w -55°C to 125°C, and is ideal for applications requiring precise temperature monitoring in compact spaces.
BSS138DW-7-F
Diodes Incorporated
BSS138DW-7-F by Diodes Incorporated is a N-channel small signal FET with a min DS breakdown voltage of 50V. It is used for switching applications and operates in enhancement mode. This surface mount transistor has a max drain current of 0.2A and a max power dissipation of 0.2W.
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Jiangsu Jiejie Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317AEMP/NOPB
Texas Instruments
LM317AEMP/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and a max output current of 1.5A. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in a compact package.
LP2950CDT-3.3G
Onsemi
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
PIC32MX795F512L-80I/PF
PIC32MX795F512L-80I/PF by Microchip: 32-bit RISC CPU, 50 MHz clock, 131072 RAM bytes. Ideal for industrial applications requiring low power mode, with Ethernet, USB connectivity and 16-Ch 10-Bit ADC channels.
TM4C129ENCPDTI3
TM4C129ENCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 20-Ch 12-Bit ADC channels, 32 DMA channels, and 8 PWM channels. Ideal for industrial applications requiring high-speed processing and connectivity via CAN, Ethernet, I2C, SPI, UART, and USB interfaces.
ATXMEGA128A1-AUR
ATXMEGA128A1-AUR by Microchip Technology is a 16-bit microcontroller with 24-bit address bus width, 8 DAC channels, and 78 external interrupts. It is ideal for industrial applications requiring a max clock frequency of 32 MHz, low power mode support, and connectivity via TWI, SPI, and USART interfaces.
ATSAMD21G18A-MFT
Atmel
MICROCONTROLLER, RISC; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
ATXMEGA128A4U-CU
ATXMEGA128A4U-CU by Microchip Technology is a 16-bit microcontroller with 131072 ROM words and 8192 RAM bytes. It features 12-Ch 12-Bit ADC channels, 5 timers, and SPI, TWI, USART, USB connectivity. Ideal for industrial applications requiring low power mode and a max clock frequency of 16 MHz.
ATXMEGA256A3U-MH
ATXMEGA256A3U-MH by Microchip Technology is a 16-bit microcontroller with 262144 ROM words, 16384 RAM bytes, and 4096 data EEPROM size. It features 7 timers, 16 ADC channels, and connectivity options like I2C(2), SPI(3), USART(7), USB. Ideal for industrial applications requiring low power mode and max clock frequency of 32 MHz.
MSP430FR5739IRHAT
MSP430FR5739IRHAT by Texas Instruments is a 16-bit microcontroller with 1024 bytes of RAM and 16384 ROM words. It features 14-Ch 10-Bit ADC channels, 3 DMA channels, and operates at a max clock frequency of 24 MHz. Ideal for industrial applications requiring low power consumption and connectivity options like I2C, IRDA, SCI, SPI, and UART.
ATXMEGA128A3U-MH
ATXMEGA128A3U-MH by Microchip Technology is a 16-bit microcontroller with 131072 ROM words, 2048 data EEPROM size, and 8192 RAM bytes. It features 16-Ch 12-Bit ADC channels, 2-Ch 12-Bit DAC channels, and connectivity options like I2C(2), SPI(3), USART(7), USB. Ideal for industrial applications requiring high-speed processing at up to 32 MHz clock frequency.
STM32L476VGT6
STM32L476VGT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M4 CPU, 131072 bytes RAM, and 1048576 ROM words. It features 16 ADC channels, 14 DMA channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring low power consumption and high-performance computing capabilities.
ATXMEGA256A3-AUR
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
ATTINY85-20SF
ATTINY85-20SF by Microchip: 8-bit RISC CPU, 512B RAM, 20MHz clock speed. Ideal for industrial applications requiring low power consumption and PWM functionality. Small outline package with 8 terminals, suitable for surface mount assembly.
ATMEGA8515-16AU
ATMEGA8515-16AU by Microchip: 16MHz clock, 512B EEPROM, SPI & USART connectivity. Ideal for industrial applications requiring low power mode and featuring 35 I/O lines.
ATTINY85-20SH
ATTINY85-20SH by Microchip Technology is an 8-bit microcontroller with a max clock frequency of 20 MHz. It features 512 bytes of RAM and 8192 ROM words, suitable for industrial applications. With PWM channels and ADC support, it offers versatile functionality in a small outline package.
ATXMEGA128A3U-AUR
ATXMEGA128A3U-AUR by Microchip Technology is a 16-bit microcontroller with 131072 ROM words and 8192 RAM bytes. It features 16-Ch 12-Bit ADC channels, 2-Ch 12-Bit DAC channels, and operates at a max clock frequency of 32 MHz. Ideal for industrial applications requiring low power consumption and high-speed processing capabilities.
STM32H7A3VIT6
STM32H7A3VIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU family, offering 64.3 MHz clock frequency and 1413120 bytes of RAM. It features 18 timers, CAN, I2C, SPI connectivity options, and operates in industrial temperature range (-40 to 85 °C). Ideal for applications requiring high-performance computing and extensive peripheral support.
ATMEGA2560V-8AUR
ATMEGA2560V-8AUR by Microchip Technology is a microcontroller with 16-bit address bus, 8-bit data RAM, and 131072 ROM words. It features 86 I/O lines, SPI and TWI connectivity, and operates at a max clock frequency of 8 MHz. Ideal for industrial applications requiring low power consumption and multiple peripherals like PWM(12) and RTC.
STM32F373C8T6
STM32F373C8T6 by STMicroelectronics is a 32-bit microcontroller with 3.6V max supply voltage, -40 to 85°C operating temp, and 36 I/O lines. It features 9-Ch ADC, 3-Ch DAC, and 75.7mA max supply current. Ideal for industrial applications requiring high-speed processing and connectivity via CAN, HDMI-CEC, USB, and more.
ATMEGA32U4-MU
ATMEGA32U4-MU by Microchip: 8-bit RISC CPU, 5.5V max supply, 16MHz clock freq. Ideal for industrial applications with SPI, TWI, USART, USB connectivity and low power mode. Contains 12-Ch ADCs, 10-Bit PWM channels, and Flash ROM programmability for versatile microcontroller tasks.
MC68332ACEH25
Freescale Semiconductor
MICROCONTROLLER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 132; Package Code: BQFP; Package Shape: SQUARE;
ATMEGA328PB-AURVAO
ATMEGA328PB-AURVAO by Microchip: 8-bit RISC CPU, 2048B RAM, 16384 ROM words. Ideal for low power applications with ADC, PWM(10), USART(2) peripherals. Operates at -40 to 85 °C, suitable for automotive and industrial environments.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATSAM3X8EA-AU
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
Microchip ATSAM3X8EA-AU is a 32-bit microcontroller with Cortex-M3 CPU, 144 terminals, and 20 MHz clock frequency. Ideal for industrial applications, it features DAC and ADC channels, 98304 bytes of RAM, and flash ROM programmability.
ATSAMD21G18A-MU
ATSAMD21G18A-MU by Microchip: 32-bit Cortex-M0 MCU with 3.3V supply, 48 terminals, and 16 external interrupts. Ideal for industrial applications requiring low power mode, featuring DAC and ADC channels, along with multiple connectivity options like I2C, SPI, USART.
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
ATSAMD21G18A-AU
ATSAMD21G18A-AU by Microchip: 32-bit Cortex-M0 CPU, 3.3V supply, 48 terminals. Ideal for industrial applications requiring low power consumption and high clock frequency up to 32MHz. Features integrated cache, DAC channels, and ADC channels for efficient data processing.
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 48; Package Code: TFQFP; Package Shape: SQUARE;
ATSAMD21J18A-AU
ATSAMD21J18A-AU by Microchip: 32-bit Cortex-M0 CPU, 3.3V supply, 64 terminals. Ideal for industrial applications requiring low power consumption and high clock frequency up to 32MHz. Features integrated cache, DAC channels, and DMA support for efficient data processing.
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TFQFP; Package Shape: SQUARE;
ATSAME70Q21A-ANT
Microchip ATSAME70Q21A-ANT is a 32-bit microcontroller with Cortex-M7 CPU, 24 external interrupts, and 24 DMA channels. It features 144 terminals, 20 MHz clock frequency, and industrial temperature grade. Ideal for applications requiring high-speed processing and extensive peripheral support in automotive electronics and industrial automation.
ATSAMD21G18A-AUT
ATSAMD21G18A-AUT by Microchip is a 32-bit microcontroller with 48 terminals, operating at up to 32 MHz. It features 16 external interrupts, 14 ADC channels, and low power mode. Ideal for industrial applications requiring high-speed processing and multiple connectivity options like I2C, SPI, and USART.
ATSAMD21J18A-AUT
ATSAMD21J18A-AUT by Microchip: 32-bit Cortex-M0 CPU, 3.3V supply, 32768 RAM words. Ideal for industrial applications requiring low power consumption and high-speed processing with features like integrated cache, DAC channels, and multiple connectivity options.
ATSAME70Q21A-AN
Microchip Technology's ATSAME70Q21A-AN is a 32-bit microcontroller with Cortex-M7 CPU, 24 address bus width, and 8 on-chip data RAM width. Ideal for industrial applications, it features CAN, I2S, SPI connectivity options and operates at a max clock frequency of 20 MHz. With low power mode and integrated cache, this MCU offers high performance in a compact square package.
ATSAME51J20A-AU
Microchip's ATSAME51J20A-AU is a 32-bit microcontroller with Cortex-M4F CPU, offering 1048576 ROM words and 262144 RAM words. It features 16 ADC channels, 2 DAC channels, and 13 timers suitable for industrial applications requiring high-speed processing up to 48 MHz. With CAN, Ethernet, I2C, LIN, QSPI, and USB connectivity options, it provides versatile peripheral support in a compact square package ideal for space-constrained designs.
ATSAME70N21A-AN
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 100; Package Code: LFQFP; Package Shape: SQUARE;
Microchip's ATSAME70N21A-AN is a 32-bit microcontroller with Cortex-M7 CPU, offering 2 DAC and 10 ADC channels. It features 24 DMA channels, 12 timers, and peripherals like CAN, I2S, SPI, UART, USART, USB for industrial applications. With a clock frequency of up to 20 MHz and low power mode support, it provides high-speed processing capabilities in a compact form factor.
ATSAMD21G18A-MF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved