Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ATF1504ASVL-20AU100 by Microchip Technology is a 3.3V EE PLD with 64 I/O lines, 20ns propagation delay, and 83.3MHz clock frequency. Ideal for industrial applications requiring fast processing and high I/O capability in a compact square package with gull wing terminals.
Median Price
$5.738
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
$5.614
100+ parts
-
1k+ parts
10k+ parts
Nova Conductors
$5.861
Vyrian
VNN
Vigor
$4.240
Semicontronic
$5.020
$4.894
$4.869
Ampacity Inc.
Corphita
$5.319
Corohmni
$5.420
Netroflash
Continental Prestige Electronics
$5.743
AZTECH Wire
$16.760
$16.100
$15.770
$15.460
Aztec Data Supply Inc.
$110.950
Authorized Procurement Solutions
Futuretech Components
Argo Parts USA
Supply Digital
West Coast Incorporated
Perfect Parts
Provides durability and protection for the internal components of the PLD, making it suitable for various applications.
Fast propagation delay allows for quick processing and response times, making it ideal for time-sensitive applications.
Facilitates easy installation and integration onto circuit boards, saving space and reducing assembly time.
Operates within a safe voltage range, preventing damage to the PLD and ensuring reliable performance.
Square shape allows for efficient use of space on the circuit board, optimizing the layout and design of the overall system.
Gull wing terminals provide secure and stable connections, reducing the risk of disconnection or signal interference.
Stable supply voltage ensures consistent and reliable operation of the PLD under normal operating conditions.
Tray packaging ensures safe transport and storage of the PLDs, minimizing the risk of damage during handling.
Offers a sufficient number of terminals for connecting to various external devices and components, enhancing versatility and compatibility.
Electrically Erasable Programmable Logic Device allows for reprogramming and customization of the logic functions, enabling flexibility in design and implementation.
Compact and slim package design with fine pitch terminals maximizes space efficiency and allows for high-density mounting on the circuit board.
Programmable Logic Devices (PLD) ATF1504ASVL-20AU100 attributes and parameters. Explore more Programmable Logic Devices (PLD) devices from Microchip Technology
Programmable IC Type:
Organization:
Output Function:
No. of Dedicated Inputs:
No. of I/O Lines:
Maximum Clock Frequency:
Propagation Delay:
Nominal Supply Voltage:
Minimum Supply Voltage:
Maximum Supply Voltage:
Maximum Operating Temperature:
Minimum Operating Temperature:
Temprature Grade:
Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
Maximum Time At Peak Reflow Temperature:
Package Body Material:
Package Style (Meter):
Package Code:
Package Shape:
Width:
Length:
Maximum Seated Height:
Packing Method:
Terminal Position:
Terminal Form:
No. of Terminals:
Terminal Pitch:
Terminal Finish:
JESD-30 Code:
JESD-609 Code:
Qualified:
ATF1504ASVL-20AU100 Programmable ICs trade compliance attributes, and parameters.
ECCN
3A991.A.2
ECCN Governance
EAR
HTS
8542.31.00.01
SB
8542.31.00.00
Microchip Technology Incorporated is a leading provider of integrated circuit (IC) solutions for the global market. Founded in 1989, the company designs, manufactures, tests and markets state-of-the-art microcontrollers and analog devices for use in a wide array of electronics applications, such as the automotive industry, consumer electronics and industrial automation. Through its world-class production processes and technologies, Microchip Technology has become an innovator of semiconductor solutions that enable customers to maximize their performance while streamlining costs.
President and CEO
Ganesh Moorthy
Executive Chair
Steve Sanghi
CFO, Senior VP
J. Eric Bjornholt
Fab 5 - Colorado
Fabrication
Fab Initiation
1995
USA
Colorado Springs
Wafer Capacity
70,000
Santa Clara
1990
1,290
Lawrence
1989
5,000
Fab 4 - Gresham
1988
Gresham
50,000
Fab 2 - Tempe
1994
Tempe
30,000
Beverly
1985
2,000
Lowell
1986
15,000
Garden Grove
12,000
New Fab - Gresham
2024
CSNF651
Honeywell Sensing And Control
CSNF651 by Honeywell Sensing And Control is an industrial-grade analog circuit with 3 terminals. It operates b/w -40 to 85°C, supporting supply voltages from -15V to 15V. Ideal for applications requiring a special shape rectangular package style and through-hole terminal form.
ULN2803ADW
Texas Instruments
ULN2803ADW by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85 °C and has a max supply voltage of 3 V. Ideal for applications requiring buffer or inverter-based peripheral drivers with sink current flow direction.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
ERJ3GEY0R00V
Panasonic
ERJ3GEY0R00V by Panasonic is a SMT fixed resistor with 0 ohm resistance, suitable for jumper applications. It features a metal glaze/thick film technology, rated for temperatures b/w -55 to 155 °C. With a compact rectangular construction and matte tin over nickel terminal finish, it is ideal for surface mount installations in various electronic devices.
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
LM555CM
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LL4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: NO LEAD; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
BAV99
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
Rfe International
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Sensitron Semiconductor
B340A-13-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
FDV303N
Onsemi
FDV303N by Onsemi is a N-CHANNEL FET with 25V DS Breakdown Voltage, 0.68A Drain Current, and 0.45 ohm On Resistance. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE at temperatures ranging from -55 to 150°C. Package style is SMALL OUTLINE with GULL WING terminals for surface mount assembly.
SDR0604-101KL
Bourns
SDR0604-101KL by Bourns is a surface mount fixed inductor with a nominal inductance of 100 uH. It is a general purpose inductor suitable for power applications, with a max rated current of 0.52 A and a self-resonance frequency of 9 MHz.
LM358MX
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
American Power Devices
Iskra Semic Capacitors Industry
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; JESD-609 Code: e0; Maximum Non Repetitive Peak Forward Current: 2 A;
Excel (Suzhou) Semiconductor
5M160ZE64C4N
Altera
The 5M160ZE64C4N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 7.9 ns and a maximum clock frequency of 184.1 MHz. The device operates at a nominal supply voltage of 1.8V and has a minimum supply voltage of 1.71V. It is surface mountable, has 54 I/O lines, and uses CMOS technology. This PLD is suitable for applications requiring in-system programmability and output functions such as macrocells.
LC4128ZE-7TN100C
Lattice Semiconductor
LC4128ZE-7TN100C by Lattice Semiconductor is a 128 macrocell EE PLD with 7.5 ns propagation delay, 111 MHz max clock frequency, and 64 I/O lines. Ideal for applications requiring in-system programmability, such as digital signal processing and telecommunications systems.
XC2C64A-5VQ100C
Xilinx
XC2C64A-5VQ100C by Xilinx is a 64 macrocell FLASH PLD with 5 ns propagation delay, operating at up to 333 MHz. It features in-system programmability and 64 I/O lines, suitable for applications requiring fast processing speeds and versatile I/O configurations in commercial-grade environments.
M4A5-96/48-55VNC
M4A5-96/48-55VNC by Lattice Semiconductor is a 96 macrocell EE PLD with 48 I/O lines. It features a propagation delay of 5.5 ns, operates at a max clock frequency of 105 MHz, and has in-system programmability. Ideal for applications requiring fast processing speeds and versatile I/O capabilities in commercial-grade environments.
EPM3032ATC44-10
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
ATF1502ASV-15AU44
Microchip Technology
Microchip Technology's ATF1502ASV-15AU44 is a 32 macrocell EE PLD with 15 ns propagation delay, suitable for industrial applications. It operates at a max clock frequency of 100 MHz and has in-system programmability, making it ideal for high-speed digital designs. The device features JTAG boundary scan testing and can withstand temperatures ranging from -40 to 85°C.
EPM3032ATI44-10N
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: LQFP; Package Shape: SQUARE;
EPM7160STI100-10N
Intel
EPM7160STI100-10N by Intel is a 160 macrocell EE PLD with 10 ns propagation delay, suitable for industrial applications. It operates at a max clock frequency of 125 MHz and has 84 I/O lines, making it ideal for high-speed digital designs. With in-system programmability and JTAG boundary scan test capability, this PLD offers flexibility and ease of testing during development.
EPM3032ATC44-4N
Intel's EPM3032ATC44-4N is a 32 macrocell EE PLD with 4.5 ns propagation delay, operating at up to 227.3 MHz clock frequency. Ideal for applications requiring in-system programmability and featuring 34 I/O lines, this CMOS technology PLD has a max supply voltage of 3.6 V and operates within -40 to +85°C temperature range.
ATF22V10CQZ-20SC
Atmel
EE PLD; Grading Of Temperature: COMMERCIAL; Form Of Terminal: GULL WING; No. of Terminals: 24; Package Code: SOP; Package Shape: RECTANGULAR;
LC4064V-25TN48C
LC4064V-25TN48C by Lattice Semiconductor is a 64 macrocell EE PLD with 36 inputs and 32 I/O lines. It has a propagation delay of 2.5 ns, operates at a max frequency of 250 MHz, and supports JTAG boundary scan testing. Ideal for applications requiring fast processing speeds and high input/output capabilities in programmable logic devices.
EPM7032AETI44-7N
The EPM7032AETI44-7N by Altera is a programmable logic device with 32 macro cells and 36 inputs/outputs. It has a maximum clock frequency of 138.9 MHz and a propagation delay of 7.5 ns. This PLD is surface mountable and can be programmed in-system. It is commonly used in industrial applications due to its industrial-grade temperature grading.
XC9536XL-10VQG44C
Xilinx XC9536XL-10VQG44C is a 36 macrocell FLASH PLD with 34 I/O lines, operating at max 138.88 MHz clock frequency and 10 ns propagation delay. Ideal for applications requiring in-system programmability, such as digital signal processing and control systems.
5M570ZT144I5N
The Altera 5M570ZT144I5N is a programmable logic device (PLD) with 440 macro cells. It has a maximum clock frequency of 118.3 MHz and a propagation delay of 17.7 ns. This PLD is surface mountable and can operate at temperatures ranging from -40 to 100 degrees Celsius. It is suitable for industrial applications requiring a compact form factor and in-system programmability.
EPM1270T144C5N
FLASH PLD; Grading Of Temperature: OTHER; Form Of Terminal: GULL WING; No. of Terminals: 144; Package Code: LFQFP; Package Shape: SQUARE;
LCMXO640C-3TN100I4W
LCMXO640C-3TN100I4W by Lattice: 640 logic cells, 4.9 ns propagation delay, 388 MHz clock freq. Ideal for PLD applications with 74 I/O lines, CMOS tech, and low profile flatpack package style.
ATF22V10CZ-15PI
ATF22V10CZ-15PI by Microchip Technology is a 24-terminal PLD with 15ns propagation delay and 5.5V max supply voltage. Ideal for industrial applications, it features CMOS technology, FLASH PLD type, and operates at up to 55.5MHz clock frequency.
EPM7128AETI100-7N
The EPM7128AETI100-7N by Altera is a programmable logic device with 128 macro cells. It has a propagation delay of 7.5 ns and can operate at a maximum supply voltage of 3.6 V. This PLD is surface mountable and uses CMOS technology. Its applications include digital logic designs, data processing, and control systems.
M4A5-128/64-10VNC
M4A5-128/64-10VNC by Lattice Semiconductor is a 128 macrocell EE PLD with 64 I/O lines, operating at up to 62.5 MHz. It features a propagation delay of 10 ns and can be in-system programmable, making it ideal for applications requiring fast processing speeds and versatile input/output configurations. The device is designed for use in commercial-grade electronics that demand high-performance programmable logic devices with low power consumption.
EPM7128BTC100-4N
EPM7128BTC100-4N by Intel is a 128 macrocell EE PLD with 84 I/O lines, operating at up to 243.9 MHz clock frequency. It has a propagation delay of 4 ns and can be used for in-system programmable applications requiring low profile, fine pitch packaging.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
ATF1504AS-10JU44
ATF1504AS-10JU44 by Microchip Technology is a programmable logic device (PLD) with 64 macro cells and 32 inputs/outputs. It has a max clock frequency of 125 MHz and can be used for in-system programming, making it suitable for industrial applications.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 44; Package Code: QCCJ; Package Shape: SQUARE;
ATF1508AS-10AU100
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 100; Package Code: TFQFP; Package Shape: SQUARE;
Microchip ATF1508AS-10AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 125 MHz clock frequency, has 10 ns propagation delay, and supports in-system programming. Ideal for industrial applications requiring fast processing and versatile I/O capabilities.
ATF1504AS-10AU44
Microchip Technology's ATF1504AS-10AU44 is a 5.5V PLD with 10ns propagation delay, 64 macro cells, and 32 inputs. Ideal for industrial applications, it offers in-system programmability, JTAG boundary scan test support, and operates at temperatures ranging from -40 to 85°C.
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: GULL WING; No. of Terminals: 44; Package Code: TQFP; Package Shape: SQUARE;
ATF1508ASV-15AU100
Microchip's ATF1508ASV-15AU100 is a 128 macrocell EE PLD with 80 I/O lines. It operates at 3.3V, has a propagation delay of 15ns, and supports in-system programming. Ideal for industrial applications requiring high clock frequencies up to 100MHz.
ATF1504AS-10AU100
Microchip Technology's ATF1504AS-10AU100 is a 64 macro cell EE PLD with 64 inputs/outputs and 40 product terms. It operates at a max clock frequency of 125 MHz, with a propagation delay of 10 ns. Ideal for industrial applications requiring in-system programmability and JTAG boundary scan testing.
ATF1504ASV-15AU44
ATF1508ASV-15AU100-T
Microchip Technology's ATF1508ASV-15AU100-T is a 3.3V EE PLD with 15ns propagation delay and 100 terminals. Ideal for industrial applications, it features a max clock frequency of 100MHz, 80 I/O lines, and operates b/w -40 to 85°C.
ATF1504ASVL-20AU44
Microchip Technology's ATF1504ASVL-20AU44 is a 3.3V EE PLD with 32 I/O lines and 20ns propagation delay. Ideal for industrial applications, it features a max clock frequency of 83.3MHz and operates b/w -40 to 85°C, making it suitable for various programmable logic tasks.
ATF1508ASL-25AU100
Microchip ATF1508ASL-25AU100 is a 128 macrocell EE PLD with 25ns propagation delay, in-system programmable, and supports JTAG boundary scan test. Ideal for industrial applications requiring high-speed processing up to 33.3MHz, with a wide operating temperature range from -40°C to 85°C. Package style is flatpack, thin profile, fine pitch for compact designs.
ATF1504AS-10AU44-T
Microchip Technology's ATF1504AS-10AU44-T is a 32 I/O EE PLD with 10 ns propagation delay and 125 MHz clock frequency. Ideal for industrial applications, this PLD features a max supply voltage of 5.5 V and operates in temperatures ranging from -40 to 85 °C.
ATF1504AS-10JU84
EE PLD; Grading Of Temperature: INDUSTRIAL; Form Of Terminal: J BEND; No. of Terminals: 84; Package Code: QCCJ; Package Shape: SQUARE;
Microchip Technology's ATF1504AS-10JU84 is a 64 macrocell EE PLD with 32 inputs/outputs, 40 product terms, and 10ns propagation delay. Ideal for industrial applications, it operates b/w -40 to 85°C, supports JTAG boundary scan test, and has a max clock frequency of 125MHz.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved