Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX8877EUK25-T by Maxim Integrated is a fixed positive single output LDO regulator with 2.5V nominal output voltage, 0.15A max output current, and 3% max voltage tolerance. Ideal for applications requiring low dropout voltage and compact design in surface mount technology.
Median Price
$2.615
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
DigiKey
1+ parts
$3.240
100+ parts
$2.001
1k+ parts
$1.867
10k+ parts
-
Rochester
$1.990
$1.780
$1.670
Nova Conductors
$1.258
Digiode
$2.100
Vyrian
Corel Iberica Componentes, S.L.
ECAB
ComSIT Distribution GmbH
ComSIT USA
ACDS - Activité Composants Distribution Service
Anansix
Prism Electronics
LIBRA Elektronik GmbH
Sunrise Surplus Inc.
Netroflash
$1.233
Ampacity Inc.
$1.880
Corphita
$1.989
Semicontronic
$4.090
$3.988
$3.967
MARBEL Systems
$4.816
Texas Native Microelectronics
$5.536
$5.315
$5.148
$4.872
Kenton Components
$6.643
$5.846
Qasali Group International
$14.947
$13.901
$13.154
AZTECH Wire
$15.123
Metaverse IC Inc.
QUARKTWIN TECHNOLOGY LTD
Microchip USA
Assy Fe
Cyclops Electronics Ltd (Excess)
The plastic/epoxy package body material makes the product lightweight and durable, ideal for portable devices.
The low dropout voltage ensures efficient power conversion and minimal power loss in the regulator.
The surface mount feature makes it easy to integrate into PCBs, saving space and simplifying assembly.
The wide operating temperature range of up to 150C ensures reliable performance in various environmental conditions.
The CMOS technology offers low power consumption and high efficiency, making the regulator suitable for battery-powered devices.
The rectangular shape of the package allows for easy placement on the PCB, optimizing board space.
The fixed output voltage eliminates the need for external adjustment, simplifying design and improving reliability.
The high output current capability makes the regulator suitable for a wide range of applications, providing stable power supply.
The high maximum input voltage tolerance ensures compatibility with different power sources, enhancing flexibility in design.
Fixed Regulators - Positive Single Output LDO MAX8877EUK25-T attributes and parameters. Explore more Fixed Regulators - Positive Single Output LDO devices from Maxim Integrated
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
Maximum Input Voltage:
Minimum Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
MAX8877EUK25-T Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
BAV99
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rectron
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Micro Commercial Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Position: DUAL;
Dc Components
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
LM555CMX
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CRGCQ0805F10K
TE Connectivity
TE Connectivity's CRGCQ0805F10K is a 10000 ohm fixed resistor with 1% tolerance. It operates b/w -55 to 155 °C and has a power dissipation of 0.125 W. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
LM358M
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
1N4148
Semitron
RECTIFIER DIODE; Surface Mount: NO; JESD-609 Code: e0; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Maximum Reverse Recovery Time: .004 us;
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
Surge Components
1N4148WS
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM107H/883
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
ADP151AUJZ-3.3-R7
Analog Devices
ADP151AUJZ-3.3-R7 by Analog Devices is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.2A max output current, and 5 terminals. It operates in temperatures ranging from -40 to 125°C and is ideal for applications requiring precise voltage regulation in compact spaces.
MCP1702T-3302E/MB
Microchip Technology
MCP1702T-3302E/MB by Microchip Tech is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.25A max output current. It has a small outline package style, matte tin terminal finish, and operates in temperatures ranging from -40 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
TLV1117-33IDCYR
TLV1117-33IDCYR by Texas Instruments is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.8A max output current. Operating temperature ranges from -40 to 125°C, making it suitable for various applications in electronics requiring stable voltage regulation.
TPS71733DCKRG4
TPS71733DCKRG4 by Texas Instruments is a BICMOS technology LDO regulator with 3.3V output voltage, 0.15A max current, and 0.3V dropout voltage. Ideal for applications requiring stable power supply in compact designs with operating temperatures from -40 to 125°C.
LM1084IS-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 25 V; Maximum Voltage Tolerance: 2 %;
LM2940T-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 60 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE;
SPX3819M5-L-5-0/TR
Exar
Exar's SPX3819M5-L-5-0/TR is a fixed positive single output LDO regulator with 5V nominal output voltage and 0.5A max output current. It features a small outline, low profile package style suitable for surface mount applications. With a max dropout voltage of 0.7V, it operates within a wide temperature range from -40°C to 125°C, making it ideal for various electronic devices requiring stable voltage regulation.
LD1117S12TR
LD1117S12TR by STMicroelectronics is a fixed positive single output LDO regulator with a max output current of 1.3A and a max input voltage of 15V. It features a small outline package style, matte tin terminal finish, and operates within an extended temperature range from 0 to 125°C. Ideal for applications requiring stable voltage regulation in compact electronic devices.
NCV1117ST18T3G
Onsemi
NCV1117ST18T3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1.07V. It operates in temperatures ranging from -55 to 150°C, making it suitable for automotive applications requiring stable voltage regulation in compact spaces.
MCP1799T-3302H/TTVAO
MCP1799T-3302H/TTVAO by Microchip Technology is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.08A. It operates in an extended temperature range from -40°C to 150°C, making it suitable for automotive applications requiring stable voltage regulation in harsh environments. The compact package style and low profile design make it ideal for space-constrained PCB layouts while ensuring efficient power management with minimal dropout voltage.
LM2936HVBMAX5.0/NOPB
Texas Instruments LM2936HVBMAX5.0/NOPB is a fixed positive single output LDO regulator with 5V nominal output voltage, 0.4V max dropout voltage, and 0.05A max output current. Ideal for applications requiring stable voltage regulation in compact spaces with operating temperatures ranging from -40°C to 150°C.
LM1117LDX-1.8/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: HVSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3 %;
MIC39100-5.0WS-TR
Micrel
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 4; Package Code: SOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 2 %; Terminal Position: DUAL;
LP2985AIM5-1.8/NOPB
LP2985AIM5-1.8/NOPB by Texas Instruments is a fixed positive single output LDO regulator with 1.8V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style suitable for surface mount applications in various electronic devices operating within -40 to 125°C temperature range.
LT3010EMS8E-5#TRPBF
Analog Devices' LT3010EMS8E-5#TRPBF is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max dropout voltage of 0.55V. This surface-mount device operates b/w -40°C to +125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
SPX1117M3-L-3.3/TR
Sipex
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Terminal Finish: MATTE TIN; Maximum Output Voltage-1: 3.366 V;
TPS76333DBVRG4
TPS76333DBVRG4 by Texas Instruments is a fixed positive single output LDO regulator with an output voltage of 3.3V and max current of 0.15A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. With a small outline package style and surface mount capability, it is ideal for space-constrained electronic devices.
LM2936MX-3.3/NOPB
LM2936MX-3.3/NOPB by Texas Instruments is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.05A. It has a small outline package style, operates b/w -40 to 125 °C, and is ideal for applications requiring low dropout voltage and precise voltage regulation.
LT1763CS8-3.3#TRPBF
Linear Technology
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.4 %;
LM2931M-5.0/NOPB
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 10 %;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX8878EZK28-T
Maxim Integrated
MAX8878EZK28-T by Maxim Integrated is a fixed positive single output LDO regulator with 2.8V nominal output voltage and 0.15A max output current. It has a small outline, low profile package style and operates b/w -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
MAX8878EZK28+T
MAX8878EZK28+T by Maxim Integrated is a fixed positive single output LDO regulator with a nominal output voltage of 2.8V and max output current of 0.15A. It operates in temperatures ranging from -40 to 85°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, low profile, shrink pitch, ideal for surface mount designs with limited space constraints.
MAX8881EUT33+T
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 14 V; Maximum Voltage Tolerance: 3 %;
MAX8881EUT33-T
MAX8881EUT33-T by Maxim Integrated is a fixed positive single output LDO regulator with 3.3V nominal output voltage, 0.2A max output current, and 3% voltage tolerance. It is ideal for applications requiring low dropout voltage and operates at temperatures up to 150°C.
Analog Devices' MAX8881EUT33+T is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.2A. It features a small outline, low profile package style suitable for surface mount applications, with a terminal pitch of 0.95mm and operating temperature up to 150°C. Ideal for systems requiring stable voltage regulation in compact spaces.
MAX8510EXK18+TG65
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Moisture Sensitivity Level (MSL): 1;
MAX8510EXK18+T
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
MAX8510EXK18-T
MAX8887EZK33-T
MAX8887EZK33+T
Analog Devices' MAX8887EZK33+T is a BICMOS technology LDO regulator with 3.3V output voltage, 0.3A output current, and 3% voltage tolerance. It operates b/w -40°C to 85°C, suitable for applications requiring fixed positive single output regulators in compact designs with surface mount capabilities.
MAX8510EXK30+T
MAX8510EXK30-T
Analog Devices' MAX8510EXK30+T is a BICMOS technology-based LDO regulator with 3% voltage tolerance. It operates at a max temperature of 150°C, has a dropout voltage of 0.17V, and can handle up to 0.12A output current. Ideal for applications requiring fixed positive single output regulators in compact spaces due to its small outline package style and low seated height of 1.1mm.
MAX8877EUK3.3-T
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Maximum Output Voltage-1: 3.399 V;
MAX8877EUK33+T
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 7 V; Maximum Voltage Tolerance: 3 %;
Analog Devices' MAX8877EUK33+T is a fixed positive single output LDO regulator with 3.3V nominal output voltage and 0.15A max output current. It features a small outline, low profile package style suitable for surface mount applications in various electronic devices requiring stable voltage regulation within -40 to 85°C operating temperature range.
MAX8877EUK33-T
MAX8877EUK33-T by Maxim Integrated is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.15A. It is commonly used in applications requiring low dropout voltage, such as portable devices and battery-powered systems.
FIXED POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: LSSOP; Terminal Form: GULL WING; Maximum Voltage Tolerance: 3 %; Nominal Output Voltage-1: 3.3 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved