Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: OVAL; Body Width: 3.62 inch; Output Interface Type: 1-WIRE INTERFACE;
Median Price
$3.390
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Farnell
1+ parts
$1.900
100+ parts
$1.320
1k+ parts
$1.310
10k+ parts
$1.300
Arrow
$2.869
$2.536
$2.319
-
Analog Devices Inc
$2.526
$2.264
$2.180
DigiKey
$3.980
$2.980
$2.659
$2.579
Mouser Electronics
$2.990
$2.580
$2.540
Newark
$4.100
$3.070
$2.740
Verical
Digiode
$1.821
Nova Conductors
$2.988
Chip Stock
Vyrian
Anansix
Ampacity Inc.
$1.610
Semicontronic
$1.570
$1.562
MARBEL Systems
$1.704
Corphita
$1.725
Texas Native Microelectronics
$1.959
$1.881
$1.822
$1.724
Kenton Components
$2.351
$2.069
Continental Prestige Electronics
$2.928
Argo Parts USA
Component Stockers USA
$3.670
$2.210
$1.450
Qasali Group International
$5.289
$4.919
$4.655
Microchip USA
$11.990
$11.920
$11.880
$11.850
Authorized Procurement Solutions
Perfect Parts
Futuretech Components
Temperature Sensors MAX31820MCR+T attributes and parameters. Explore more Temperature Sensors devices from Maxim Integrated
Maximum Accuracy (Cel):
Body Width:
Body Height:
Body Length/Diameter:
JESD-609 Code:
Mounting Feature:
No. of Bits:
No. of Terminals:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Power Supplies (V):
Sensors or Transducers Type:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Terminal Finish:
Termination Type:
MAX31820MCR+T Sensors & Transducers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
SMBJ18CA
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
LL4148-GS08
Telefunken Microelectronics
RECTIFIER DIODE; Surface Mount: YES; JESD-609 Code: e0; No. of Elements: 1; Maximum Operating Temperature: 175 Cel; Maximum Non Repetitive Peak Forward Current: 2 A;
2N2222A
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
RC0402FR-071KL
Yageo
The Yageo RC0402FR-071KL is a fixed resistor with a resistance of 1000 ohm and a tolerance of 1%. It is suitable for surface mount applications and has a max operating temperature of 155 °C.
MC33269T-3.3G
Onsemi
MC33269T-3.3G by Onsemi is a fixed positive single output LDO regulator with a max output current of 0.8 A and a dropout voltage of 1.35 V. It is commonly used in applications that require stable voltage regulation, such as power supplies for electronic devices.
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM2931Z-5.0RPG
LM2931Z-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V Nominal Output Voltage, 0.1A Max Output Current, and 6V Min Input Voltage. It operates in temperatures ranging from -40 to 125 °C and is ideal for applications requiring stable voltage regulation in electronic circuits.
BSS123,215
NXP Semiconductors' BSS123,215 is a N-CHANNEL FET for SWITCHING applications. Features include 100V DS Breakdown Voltage, 0.17A Drain Current, and 6 ohm On Resistance. With GULL WING terminals and ENHANCEMENT MODE operation, it's ideal for small outline packages in various electronic devices.
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
MCP9701T-E/LT
MCP9701T-E/LT by Microchip is an 8-bit temperature sensor with a supply voltage range of 3.1V to 5.5V, offering high accuracy within ±6°C. It is ideal for applications requiring resistance-based analog temperature sensing in automotive and industrial environments due to its TS16949 screening level and operating temperatures from -40°C to 125°C.
SHT85
Sensirion Ag
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Terminal Finish: Gold (Au); JESD-609 Code: e4;
TMP112NAIDRLR
TMP112NAIDRLR by Texas Instruments is a 12-bit temperature sensor with a supply voltage range of 1.4V to 3.6V and operating temperatures from -40°C to 125°C. It features a 2-wire interface, digital output, and surface mounting for various applications in temperature sensing systems.
LM234Z-6/NOPB
LM234Z-6/NOPB by Texas Instruments is a temperature sensor with a max supply voltage of 40V. It has a body width of 3.92in and a height of 5.05mm. This sensor is commonly used in applications that require accurate temperature measurements, such as industrial control systems and automotive electronics.
MCP9800A0T-M/OT
MCP9800A0T-M/OT by Microchip is a 12-bit temperature sensor with 2.7-5.5V supply, -55 to 125°C operating range, and ±3°C accuracy. It features a 2-wire interface, digital output, and surface mount package style. Ideal for applications requiring precise temperature monitoring in compact designs.
EMC1815T-1E/9R
EMC1815T-1E/9R by Microchip Tech is a temp sensor with 11-bit resolution, operating from -40 to 125°C. It features a 2-wire interface, digital output, and surface mounting for various applications in temperature sensing systems.
DS18B20Z
Maxim Integrated
DS18B20Z by Maxim Integrated is a 12-bit digital temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring precise temperature monitoring in compact spaces.
SI7053-A20-IMR
Silicon Labs
SI7053-A20-IMR by Silicon Labs is a 14-bit temperature sensor with ±0.20°C accuracy, I2C interface, and 1.9V to 3.6V supply voltage range. Ideal for applications requiring precise temperature monitoring in a compact square package, such as IoT devices and industrial automation systems.
AD7745ARUZ-REEL
AD7745ARUZ-REEL by Analog Devices is a 24-bit temperature sensor with a supply voltage range of 2.7V to 5.25V and accuracy of ±2°C. It operates b/w -40°C to 125°C, featuring a 2-wire interface for digital output. Ideal for applications requiring precise temperature monitoring in compact spaces with surface mounting feature.
SI7055-A20-IMR
SI7055-A20-IMR by Silicon Labs is a 14-bit temperature sensor with ±0.40 °C accuracy, I2C interface, and 1.9V to 3.6V supply voltage range. Ideal for applications requiring precise temperature monitoring in a compact square package, such as IoT devices and industrial automation systems.
TMP75BIDGKT
TMP75BIDGKT by Texas Instruments is a 12-bit temperature sensor with 2-wire interface. Operating range from -55 to 125°C, it's ideal for applications requiring precise temperature monitoring in compact spaces. With a supply voltage range of 1.4V to 3.6V, this sensor is commonly used in various industries for its accuracy and small form factor.
DVL1000/SP8
Lem International Sa
TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT;
DS18B20+T&R
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: RECTANGULAR; Package Body Material: PLASTIC/EPOXY; No. of Bits: 12;
AD7414ARTZ-2REEL7
Rochester Electronics
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 2.7 V; Termination Type: SOLDER; Terminal Finish: Nickel/Palladium/Gold (Ni/Pd/Au);
ADT7302ARTZ-500RL7
ADT7302ARTZ-500RL7 by Analog Devices is a 13-bit temperature sensor with 5.25V max supply voltage and 3°C max accuracy. It is used in applications requiring precise temperature monitoring, such as industrial automation and HVAC systems.
LM95071CIMFX/NOPB
LM95071CIMFX/NOPB by Texas Instruments is a 14-bit temperature sensor with 3.3V power supply, operating from -40 to 150°C. It features a 3-wire interface and digital output, suitable for surface mount applications in various industries.
ADT75ARZ-REEL7
ADT75ARZ-REEL7 by Analog Devices is a 12-bit temperature sensor with I2C interface. Operating range from -55 to 125°C, accuracy of ±3°C, and supply voltage of 3-5.5V make it ideal for precise temperature monitoring in various applications like industrial automation and consumer electronics.
TCN75AVUA713
TCN75AVUA713 by Microchip is a 12-bit temperature sensor with I2C interface, operating from -40 to 125°C. It has a max accuracy of ±2°C and operates on supply voltages ranging from 2.7V to 5.5V. Ideal for applications requiring precise temperature monitoring in compact spaces.
SI7021-A20-IM1
SI7021-A20-IM1 by Silicon Labs is a 14-bit temperature sensor with 3.6V max supply voltage and ±0.40°C accuracy. Ideal for applications requiring precise temperature monitoring, it operates b/w -40°C to 125°C, features I2C interface, and surface-mounting option.
LM92CIMX/NOPB
National Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Body Width: 3.9 inch; Minimum Supply Voltage: 2.7 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX31725MTA+T
Analog Devices' MAX31725MTA+T is a temperature sensor with 3.7V max supply voltage, 150°C max operating temp, and 0.70°C accuracy. Ideal for applications requiring precise temperature monitoring in compact spaces due to its small form factor and surface mounting feature.
TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Package Equivalence Code: SOLCC8,.12,25; Minimum Supply Voltage: 2.5 V;
MAX31725MTA+
TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Minimum Operating Temperature: -55 Cel; Power Supplies (V): 3/3.3;
TEMPERATURE SENSOR,ANALOG,VOLTAGE OUTPUT; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: SQUARE; Maximum Supply Voltage: 3.7 V; Package Equivalence Code: SOLCC8,.12,25;
MAX31820MCR+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: OVAL; Termination Type: SOLDER; Package Body Material: PLASTIC/EPOXY;
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: OVAL; JESD-609 Code: e3; Maximum Operating Current: 1.5 mA;
MAX31820PARMCR+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: OVAL; Power Supplies (V): 3.3; Body Width: 3.62 inch;
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: OVAL; Body Length/Diameter: 4.7 mm; Package Equivalence Code: SIP3,.1,50;
MAX31820PARMCR+T
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: OVAL; Body Width: 3.62 inch; Package Equivalence Code: SIP3,.1;
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Package Shape or Style: OVAL; Package Equivalence Code: SIP3,.1; No. of Bits: 12;
MAX31875R0TZS+T
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Shape or Style: SQUARE; Minimum Operating Temperature: -50 Cel; Minimum Supply Voltage: 1.6 V;
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Shape or Style: SQUARE; JESD-609 Code: e2; Terminal Finish: TIN SILVER COPPER NICKEL;
MAX31820MCR+T
Analog Devices' MAX31820MCR+T is a 12-bit temperature sensor with 3.3V supply, 1-Wire interface, and ±2°C accuracy. Ideal for applications requiring digital output in a compact oval package, operating from -55 to 125°C.
MAX30205MTA+
Macronix
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; No. of Bits: 16; Maximum Operating Temperature: 50 Cel; Maximum Supply Voltage: 3.3 V;
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Body Width: 3 inch; Minimum Supply Voltage: 2.7 V; JESD-609 Code: e3;
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; Package Shape or Style: SQUARE; Terminal Finish: Matte Tin (Sn) - annealed; Body Length/Diameter: 3 mm; Minimum Supply Voltage: 2.7 V;
MAX31888ALT+
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL;
MAX31888ALT+T
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved