Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAX1510ETB/V+T by Maxim Integrated is a DDR termination regulator with BICMOS technology. It has 10 terminals, operates b/w -40°C to 85°C, and is AEC-Q100 screened. This small outline package with no lead terminals is suitable for various applications requiring precise voltage regulation.
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Vyrian
Anansix
Nova Conductors
MARBEL Systems
$5.469
Texas Native Microelectronics
$6.286
$6.035
$5.846
$5.532
Kenton Components
$7.543
$6.638
AZTECH Wire
$8.667
Semicontronic
$14.500
$14.138
$14.065
Ampacity Inc.
$16.500
Qasali Group International
$16.972
$15.784
$14.936
One Stop Electronics
$20.500
Continental Prestige Electronics
Corphita
Bastille Electronics
Argo Parts USA
Provides a lightweight and durable package, suitable for a variety of applications.
Enables easy and convenient installation on circuit boards, saving space and simplifying the assembly process.
Meets automotive industry standards for reliability and durability, making it a trustworthy choice for automotive applications.
Combines the advantages of both bipolar and CMOS technologies, offering high-performance and low power consumption.
Optimal shape for maximizing space efficiency on the circuit board.
Environmentally friendly and eliminates the risk of lead contamination.
Provides sufficient connectivity options for various applications.
Compact design with efficient heat dissipation capabilities, suitable for space-constrained applications.
Able to operate in a wide range of temperatures, suitable for use in different environments.
Fine pitch for increased connectivity options and compatibility with modern board designs.
Can withstand extreme cold temperatures, making it suitable for outdoor and harsh environments.
Specifically designed for DDR memory modules, ensures stable and reliable power supply for memory components.
Dual terminal position for increased flexibility in circuit board layouts.
Low profile design for space-saving and compact applications.
Narrow width for efficient use of board space and integration into tight layouts.
Compact length for fitting into small spaces on the circuit board.
Other Function Regulators MAX1510ETB/V+T attributes and parameters. Explore more Other Function Regulators devices from Maxim Integrated
JESD-30 Code:
Length:
No. of Functions:
No. of Outputs:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Regulator Type:
Screening Level:
Maximum Seated Height:
Surface Mount:
Technology:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
MAX1510ETB/V+T Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
1N4148WS
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SMBJ18CA
Bourns
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
1N4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
BSS138
Diodes Incorporated
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Minimum DS Breakdown Voltage: 50 V; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
ULN2803A
Vishay Intertechnology
NPN; Configuration: COMPLEX; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; JESD-30 Code: R-PDIP-T18;
LM358N
Taejin Technology
OPERATIONAL AMPLIFIER; Temperature Grade: AUTOMOTIVE; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
Taitron Components
Fagor Electronica S Coop
BSS138LT1G
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
UA79M12CKD3
UA79M12CKD3 by Texas Instruments is a -12V fixed voltage regulator with 0-125°C operating temperature range. It features a max load regulation of 0.24%, max output current of 0.5A, and 35V max input voltage. Ideal for applications requiring stable power supply in various electronic devices.
SH323SC
Fairchild Semiconductor
Fairchild Semiconductor's SH323SC is a 3-terminal fixed voltage regulator with a max output current of 3A and nominal output voltage of 5V. It operates in temperatures ranging from 0 to 150°C, making it suitable for various applications requiring stable power supply such as industrial equipment and automotive electronics.
LP3879MR-1.2/NOPB
National Semiconductor
Other Regulators; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 16 V; Maximum Voltage Tolerance: 3 %;
LM7912CT
Silicon Group
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Max): 125 Cel;
UA78M06MJG
UA78M06MJG by Texas Instruments is a ceramic packaged bipolar regulator with an output voltage of 6V and max load regulation of 0.12%. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage outputs up to 0.5A.
UA723CNP3
UA723CNP3 by Texas Instruments is an adjustable bipolar regulator with a min output voltage of 2V and max output voltage of 37V. It has 14 terminals in a rectangular package style suitable for various applications requiring precise voltage regulation. With operating temperatures ranging from 0°C to 70°C, it is ideal for electronic devices needing stable power supply.
UA78M10MJG/883B
UA78M10MJG/883B by Texas Instruments is a ceramic package regulator with 10V output voltage, 0.5A output current, and -55 to 150°C operating temperature range. It is ideal for military applications due to MIL-STD-883 Class B screening level and bipolar technology, offering precise voltage regulation in harsh environments.
NX1117C285Z,115
NXP Semiconductors
NX1117C285Z,115 by NXP Semiconductors is a 3-terminal fixed voltage regulator with an output of 2.85 V and max current of 0.8 A. It operates b/w -40 to 125 °C and has a dropout voltage of 1.07 V, making it ideal for various electronic applications requiring stable power supply.
UA7822CKC
The Texas Instruments UA7822CKC is a fixed bipolar regulator with an output voltage of 22V. Operating temperature ranges from 0°C to 125°C, making it suitable for various applications in electronics requiring stable power supply. With a plastic/epoxy package body material and three terminals, it offers reliable performance in diverse electronic devices.
TPS73216MDCQREP
TPS73216MDCQREP by Texas Instruments is a BICMOS regulator with 1.6V output voltage, 0.25A max current, and 1% voltage tolerance. It is a fixed adjustability device in a plastic/epoxy package suitable for applications requiring precise voltage regulation in compact designs.
TL750M08QKTER
TL750M08QKTER by Texas Instruments is a fixed 8V voltage regulator with a max output current of 0.75A and operating temperature range from -40 to 125°C. It features a surface-mount package body material made of plastic/epoxy, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
UA78L09ACJG4
UA78L09ACJG4 by Texas Instruments is a 9V fixed voltage regulator with 0.1A output current and 3.5V dropout voltage, ideal for applications requiring stable power supply. Featuring a max input voltage of 30V, it offers excellent line and load regulation of 0.175% and 0.09% respectively, making it suitable for various electronic devices in industrial settings.
UA78L15AQLPR
UA78L15AQLPR by Texas Instruments is a fixed voltage regulator with an output of 15V and max load regulation of 0.15%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable voltage supply in a compact PLASTIC/EPOXY package.
SN0211070DBVR
Texas Instruments' SN0211070DBVR is a CMOS regulator with 5 terminals, adjustable output voltage from 1.6V to 9.5V, and max output current of 0.15A. Ideal for applications requiring precise voltage regulation in temperature range -40°C to 125°C, such as portable electronics and automotive systems.
UA79M24CKCP1
UA79M24CKCP1 by Texas Instruments is a fixed bipolar regulator with an output voltage of -24V and max load regulation of 0.3%. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
UA78M15CLA
UA78M15CLA by Texas Instruments is a 15V fixed voltage regulator with 0.5A output current and 3.3V dropout voltage, suitable for applications requiring stable power supply. It features a max input voltage of 35V, operating temperature range from 0 to 125°C, and high load regulation of 0.3%. The package style is cylindrical with a metal body material and wire terminals, making it ideal for various electronic devices.
LM105L/883B
LM105L/883B by Texas Instruments is a MIL-STD-883 Class B (Modified) regulator with adjustable output voltage from 4.5V to 40V. Utilizing bipolar technology, it operates in temperatures ranging from -55°C to 125°C. This 8-terminal device in a cylindrical package is ideal for applications requiring precise voltage regulation.
UA79M06MLA/883B
UA79M06MLA/883B by Texas Instruments is a -6V fixed voltage regulator with 0.5A output current and 2.3V dropout voltage, suitable for applications requiring precise power supply regulation in harsh environments. Operating temperature range from -55 to 150°C makes it ideal for military and aerospace use, meeting MIL-STD-883 Class B standards. With a max input voltage of 35V and excellent line/load regulation, this bipolar technology regulator in a cylindrical metal package ensures reliable performance in demanding conditions.
LM340MP-5.0
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Maximum Line Regulation: .05 %; Minimum Operating Temperature: -55 Cel;
UA78M15CKD3
UA78M15CKD3 by Texas Instruments is a fixed voltage regulator with an output of 15V and max load regulation of 0.3%. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable power supply in electronic circuits. With a max output current of 0.5A and input voltage up to 35V, this regulator is ideal for low-power devices in plastic/epoxy packages.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX1510ETB+T
Analog Devices
MAX1510ETB+T by Analog Devices is a BICMOS technology-based DDR termination regulator with a small outline, heat sink/slug, and very thin profile package style. It operates at temperatures ranging from -40 to 85 °C and has a max load regulation of 0.015%. This regulator is commonly used in applications requiring precise voltage regulation for DDR memory modules.
Maxim Integrated
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Position: DUAL; JESD-30 Code: S-PDSO-N10;
MAX1510ETB-T
MAX1510ETB-T by Maxim Integrated is a BICMOS regulator with 10 terminals, operating from -40 to 85°C. It's a DDR termination regulator in a small outline package suitable for surface mount applications. Features include 0.015% load regulation and a compact size of 3x3mm.
MAX1510ETB+
MAX1510ETB+ by Analog Devices is a BICMOS regulator with 10 terminals, operating from -40 to 85 °C. It's a DDR termination regulator in a small outline package, ideal for applications requiring precise load regulation up to 0.015%.
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; JESD-30 Code: S-PDSO-G8; Package Style (Meter): SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE;
MAX1510ETB
MAX1510ETB by Maxim Integrated is a DDR termination regulator with 10 terminals in a small outline package. It operates b/w -40°C to 85°C, offering load regulation of 0.015%. Utilizes BICMOS technology for efficient performance in various applications.
MAX17510ATB/V+
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Peak Reflow Temperature (C): 260; Package Shape: SQUARE;
MAX17510ATB+T
Analog Devices' MAX17510ATB+T is a DDR termination regulator with BICMOS technology. It features a small outline, heat sink package style and operates b/w -40 to 125°C. With 10 terminals and surface mount capability, it's ideal for applications requiring precise voltage regulation in compact spaces.
MAX15027ATB/V+
Other Regulators; Peak Reflow Temperature (C): 260; Screening Level: AEC-Q100; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Moisture Sensitivity Level (MSL): 1;
MAX1963AETA090-T
Other Regulators; No. of Terminals: 8; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 4 V; Maximum Voltage Tolerance: 2.5 %;
MAX1963AETA085-T
MAX1963AETA075-T
MAX17510ATB/V+T
Analog Devices' MAX17510ATB/V+T is a BICMOS technology DDR termination regulator with AEC-Q100 screening. It features 10 terminals in a small outline package, operating from -40 to 125°C. Ideal for automotive applications requiring precise voltage regulation in compact spaces.
MAX17510ATB+
DDR TERMINATION REGULATOR; No. of Terminals: 10; Package Code: HVSON; Terminal Form: NO LEAD; Terminal Pitch: .5 mm; Moisture Sensitivity Level (MSL): 1;
MAX15027ATB+
Other Regulators; No. of Terminals: 10; Package Code: SON; Terminal Form: NO LEAD; Package Equivalence Code: SOLCC10,.11,20; Terminal Position: DUAL;
MAX1963AETA110-T
MAX1963AETA100-T
MAX16910CATA9/V+TCB
Other Regulators; No. of Terminals: 8; Package Code: SON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: 45 V; Maximum Voltage Tolerance: 2 %;
MAX15028ATB+
Other Regulators; No. of Terminals: 10; Package Code: SON; Terminal Form: NO LEAD; Operating Temperature (TJ-Min): -40 Cel; Terminal Position: DUAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved