Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
D/A CONVERTER; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE; JESD-30 Code: S-XQCC-N32;
Median Price
-
Lifecycle Status
Suppliers In-Stock
3
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Digiode
Semicontronic
$7.000
$6.825
$6.790
One Stop Electronics
$21.000
MARBEL Systems
$22.708
Texas Native Microelectronics
$26.101
$22.969
Kenton Components
$31.321
$27.563
Qasali Group International
$70.473
$62.016
Corphita
Microchip USA
Digital-to-Analog Converters MAX11329ATJ+T attributes and parameters. Explore more Digital-to-Analog Converters devices from Maxim Integrated
Technology:
Input Format:
Input Bit Code:
Maximum Linearity Error (EL):
Maximum Supply Current:
No. of Bits:
No. of Functions:
Nominal Supply Voltage:
Minimum Operating Temperature:
Maximum Operating Temperature:
Peak Reflow Temperature:
Maximum Time At Peak Reflow Temperature:
Moisture Sensitivity Level (MSL):
No. of Terminals:
Terminal Form:
Terminal Position:
Terminal Pitch:
Terminal Finish:
Surface Mount:
Width:
Length:
Maximum Seated Height:
Package Shape:
Package Style:
Package Code:
Package Equivalence Code:
JESD-30 Code:
JESD-609 Code:
MAX11329ATJ+T Converters trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
Maxim Integrated is a leading provider of analog and mixed-signal integrated circuits for a range of industries, including automotive, industrial, communications, consumer, and computing. Founded in 1983 with headquarters in San Jose, California, Maxim has grown to become one of the world’s largest producers of integrated circuits due to its innovative solutions that solve customers’ toughest design challenges. Maxim's broad portfolio includes products such as power management solutions, high-voltage solutions, motor driver solutions, amplifiers and comparators, data converters and interface ICs. For over 35 years, Maxim has continued to push the boundaries of analog integration by providing innovative integrated circuit products that offer the industry’s highest performance and best quality. The company’s commitment to delivering cutting-edge technology enables customers to stay current with changing demands in the market. From automotive check engine lights to fitness trackers worn on the wrist – Maxim enables customers across multiple industries to create groundbreaking products through their advanced IC designs. Maxim Integrated is now officially part of Analog Devices.
President & CEO
Tunc Doluca
Senior VP & CFO
Brian C. White
Senior VP, Technology & Manufacturing Group
Vivek Jain
Fabrication
Fab Initiation
Philippines
Cavite
Wafer Capacity
489,000
USA
Beaverton
312,000
Thailand
Chon Buri
194,000
2N7002
Changzhou Galaxy Century Microelectronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Minimum DS Breakdown Voltage: 60 V; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; No. of Terminals: 3;
2N2222A
Semitronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SMBJ18CA
Vishay Intertechnology
Vishay Intertechnology's SMBJ18CA is a bidirectional TRANS VOLTAGE SUPPRESSOR DIODE with a max clamping voltage of 29.2 V and a breakdown voltage of 21.05 V. It is surface mountable and commonly used in transient suppression applications.
1N4148
Crimson Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
CRGCQ0805F10R
TE Connectivity
TE Connectivity's CRGCQ0805F10R is a 10 ohm fixed resistor with 1% tolerance and 400 ppm/°C temperature coefficient. It is a surface mount thick film resistor in an 0805 package, suitable for applications requiring precise resistance values in compact electronic circuits.
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
06035C104KAT2A
KYOCERA AVX
06035C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
BSS138LT3G
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
Goodwork Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
MURS160T3G
MURS160T3G by Onsemi is a single rectifier diode with a max output current of 2A and max repetitive peak reverse voltage of 600V. It has a fast recovery time of 0.075us, making it suitable for high voltage applications. The diode operates in temperatures ranging from -65 to 175°C, ideal for power systems requiring ultra-fast response.
Bytesonic Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Terminal Position: DUAL; Minimum Operating Temperature: -55 Cel;
MBR0520LT1
MBR0520LT1 by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring low power consumption in compact electronic devices. This single-configured diode is surface mountable and has a max repetitive peak reverse voltage of 20V, ideal for small outline package designs.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AD5542ABCPZ-REEL7
Analog Devices
AD5542ABCPZ-REEL7 by Analog Devices is a 16-bit DAC with max analog output voltage of 4.5V and linearity error of 0.0015%. Ideal for industrial applications, it operates b/w -40 to 85°C, has a settling time of 1us, and consumes only 0.15mA supply current.
AD5754RBREZ
AD5754RBREZ by Analog Devices is a 16-bit DAC with max output voltage of ±12V, settling time of 12us, and linearity error of 0.0244%. Ideal for industrial applications requiring precise analog signal generation in temperature range -40 to 85°C.
DAC8750IPWP
DAC8750IPWP by Texas Instruments is a 16-bit D/A converter with 0.08% linearity error and 10us settling time. Ideal for automotive applications, it operates b/w -40 to 125 °C with a supply voltage of 24V. Package style is small outline, heat sink/slug, thin profile, shrink pitch.
MCP4706A1T-E/CH
Microchip Technology
MCP4706A1T-E/CH by Microchip Tech is an 8-bit D/A converter with 0.3543% EL, 3/5V supplies, and 6μs tstl. Ideal for automotive applications, it features a small outline package with dual terminals and operates b/w -40 to 125°C.
CS43L22-CNZ
Cirrus Logic
CS43L22-CNZ by Cirrus Logic is a 24-bit D/A converter with a max analog output voltage of 2.79V. It is surface mountable and has a square package, making it suitable for industrial applications requiring high-quality audio conversion.
DAC7714UB/1K
DAC7714UB/1K by Texas Instruments is a 12-bit D/A converter with ±15V power supplies. It offers a max analog output voltage of ±10V and settling time of 10us, making it ideal for industrial applications requiring precise voltage outputs in a compact small outline package.
LTC1257IS8#TRPBF
LTC1257IS8#TRPBF by Analog Devices is a 12-bit D/A converter with a max output voltage of 12V and linearity error of 0.0977%. It operates in industrial temperatures, settling in 6us, making it ideal for precision control systems and instrumentation applications.
AD5689RBCPZ-RL7
AD5689RBCPZ-RL7 by Analog Devices is a 16-bit DAC with max output voltage of 5.005V, settling time of 8us, and linearity error of 0.0031%. Ideal for industrial applications requiring precise analog signal generation in temperature range -40 to 105°C.
AD5662BRJZ-2REEL7
AD5662BRJZ-2REEL7 by Analog Devices is a 16-bit DAC with max output voltage of 5.5V and settling time of 10us. Ideal for automotive applications, it operates b/w -40 to 125°C, consuming only 0.25mA supply current.
MCP4922-E/ST
MCP4922-E/ST by Microchip is a 12-bit DAC with max output voltage of 5.5V, settling time of 4.5us, and linearity error of 0.2929%. Ideal for automotive applications due to its small size, low power consumption (0.7mA), and serial input format.
AD7564BRZ
AD7564BRZ by Analog Devices is a 12-bit D/A converter with 0.0122% linearity error and 0.55 us settling time. Ideal for industrial applications, it operates at temperatures from -40 to 85 °C with a supply voltage of 5V. The small outline package has 28 terminals and uses serial input format.
AD5420AREZ-REEL7
AD5420AREZ-REEL7 by Analog Devices is a 16-bit DAC with max output voltage of 23.9V and linearity error of 0.024%. Ideal for industrial applications, it operates b/w -40 to 85°C, with a settling time of 40µs.
LTC2642IDD-16#PBF
LTC2642IDD-16#PBF by Analog Devices is a 16-bit D/A converter with max output voltage of ±2.5V, linearity error of 0.0031%, and settling time of 1µs. Ideal for industrial applications requiring precise analog signal generation in compact spaces due to its small outline package and serial input format.
DAC8830ID
DAC8830ID by Texas Instruments is a 16-bit D/A converter with max analog output voltage of 2.5V and settling time of 1us. Ideal for industrial applications, it operates b/w -40 to 85°C, has a sample rate of 1MHz, and consumes only 0.02mA supply current.
LTC1658IMS8#TRPBF
Linear Technology
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LTC2630AISC6-LZ12#TRMPBF
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
AD5421BREZ-REEL
AD5421BREZ-REEL by Analog Devices is a 16-bit D/A converter with 0.012% max linearity error and 50 us nominal settling time. It operates at temperatures ranging from -40 to 105 °C, making it suitable for industrial applications requiring precise analog signal generation. With a small outline package style and low supply current of 0.35 mA, it is ideal for space-constrained designs in various industries.
AD5443YRMZ-REEL7
AD5443YRMZ-REEL7 by Analog Devices is a 12-bit D/A converter with max analog output voltage of 5V and settling time of 0.16us. Ideal for automotive applications, it operates in temp range -40 to 125°C, features serial input format, and consumes only 0.005mA supply current.
MCP4812-E/MS
MCP4812-E/MS by Microchip Tech is a 10-bit D/A converter with max output voltage of 4.176V and linearity error of 0.34179%. Ideal for automotive applications, it operates at -40 to 125°C, has dual terminals, and requires only 0.75mA supply current.
DAC8564IAPW
DAC8564IAPW by Texas Instruments is a 16-bit D/A converter with max analog output voltage of 2.5V and settling time of 10us. Ideal for industrial applications, it operates b/w -40 to 105°C, has a sample rate of 0.2MHz, and consumes only 1.5mA supply current.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MAX1302BEUG+
D/A CONVERTER; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn) - annealed; Maximum Time At Peak Reflow Temperature (s): 30;
Maxim Integrated
D/A CONVERTER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Minimum Analog Input Voltage: -4.056 V;
MAX1302AEUG+
MAX1302AEUG+ by Analog Devices is a 16-bit D/A converter with 0.003051% EL. It operates b/w -40 to 85 °C, consuming 3.5mA at 5V supply. Ideal for applications requiring precise analog signal generation in compact spaces due to its small outline and thin profile package style.
D/A CONVERTER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Technology: BICMOS;
MAX19692EXW+D
D/A CONVERTER; Terminal Form: BALL; No. of Terminals: 169; Package Code: LFBGA; Package Shape: SQUARE; Width: 11 mm;
MAX19692EXW-D
D/A CONVERTER; Temperature Grade: INDUSTRIAL; Terminal Form: BALL; No. of Terminals: 169; Package Code: LFBGA; Package Shape: SQUARE;
MAX19693EXW+D
MAX1302AEUG+T
D/A CONVERTER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Sample and Hold/Track and Hold: TRACK;
MAX1302BEUG+T
D/A CONVERTER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Output Bit Code: OFFSET BINARY;
MAX11331ATJ+T
D/A CONVERTER; JESD-609 Code: e3; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: Matte Tin (Sn) - annealed; Peak Reflow Temperature (C): 260; Moisture Sensitivity Level (MSL): 1;
MAX19693EXW-D
D/A CONVERTER; Terminal Form: GULL WING; No. of Terminals: 24; Package Code: TSSOP; Package Shape: RECTANGULAR; Package Equivalence Code: TSSOP24,.25;
MAX11330ATJ+T
D/A CONVERTER; Moisture Sensitivity Level (MSL): 1; No. of Bits: 10; JESD-609 Code: e3; Peak Reflow Temperature (C): 260; Maximum Time At Peak Reflow Temperature (s): 30;
MAX11332ATJ+T
D/A CONVERTER; No. of Bits: 12; Maximum Time At Peak Reflow Temperature (s): 30; Terminal Finish: MATTE TIN; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260;
D/A CONVERTER; Terminal Finish: MATTE TIN; No. of Bits: 12; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; JESD-609 Code: e3;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved