Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TRIGGER OUTPUT SSR;
Median Price
$94.340
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
< 1k
Nova Conductors
1+ parts
100+ parts
-
1k+ parts
10k+ parts
Vyrian
Aztec Data Supply Inc.
$0.150
Corohmni
$0.452
AZTECH Wire
$8.143
Semicontronic
$12.100
$11.798
$11.737
Continental Prestige Electronics
$80.676
$79.062
Aranea Global
$92.453
$88.755
Argo Parts USA
Solid State Relays SSR210DIN-DC22 attributes and parameters. Explore more Solid State Relays devices from Magnecraft
Optoelectronic Type:
SSR210DIN-DC22 Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
Magnecraft - Schneider Electric - SE Relays Company Overview Founded in 1951, Magnecraft is a provider of industrial relays and sockets. There have been many acquisitions which include the Electro-Seal Division of C.P. Clare in 1972, the Hart-Advance Relay Division of Oak Industries in 1974, the Omega Electric Company in 1977, the Relay Division of Sigma Instruments in 1986, the Commercial Relay Division of Struthers-Dunn in 1990, the Milspec Relay Division of Struthers-Dunn in 1995, the Solid State Relay Division of Grayhill, Inc. in 1999, and several Relay Product Lines from Tyco Electronics in 2000. Finally, in 2004 Magnecraft was acquired by Schneider Electric and now operates as a subsidiary company within the Schneider Group. Magnecraft - Schneider Electric - SE Relays Products The types of products manufactured by Magnecraft - Schneider Electric - SE Relays include Socket Compatible and Flange Mounted Relays from 1 to 30 Amperes, Solid State Relays (SSR) from 2.5 to 125 Amperes, Power Relays & Contactors from 15 to 300 Amperes, Time Delay Relays from 5 to 15 Amperes, Latching, Sequence and Stepper Relays from 5 to 30 Amperes, Printed Circuit Board Relays from 1 to 30 Amperes, and Sockets & Accessories from 5 to 16 Amperes.
LL4148
Secos
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Telcom Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
LM317AEMP/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: SOP; Terminal Form: GULL WING; Qualification Status: Not Qualified; Width: 3.56 mm;
Shandong Yiguang Electronic Joint Stock
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Good-ark Electronics
IRLML6401TRPBF
Infineon Technologies
IRLML6401TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 12V DS Breakdown Voltage, 34A IDM, and 0.05ohm RDS(on). With a small outline package style, it operates in an ambient temperature range of -55 to 150 °C.
1N4148W-T
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
Onsemi
LM317T
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
STMicroelectronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Operating Temperature: 200 Cel; Config: SINGLE; Terminal Finish: Tin/Lead (Sn/Pb);
Unitrode
1N4148WT
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Vpt Components
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Maximum Power Dissipation Ambient: .5 W;
MS3V-T1R32.768KHZ+/-20PPM12.5PF
Golledge Electronics
MS3V-T1R32.768KHZ+/-20PPM12.5PF by Golledge Electronics is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 12.5 pF load capacitance. It is ideal for applications requiring precise timing in temperature-sensitive environments due to its -40 to 85 °C operating range.
ODC-5
TE Connectivity
TE Connectivity's ODC-5 is a 5V DC solid state relay with max output voltage of 60V. Featuring transistor output circuit type, it operates b/w -30 to 80°C. Ideal for panel mounting applications requiring optoelectronic control at supply voltages ranging from 3-8V.
DC60S3
Sensata Technologies
TRANSISTOR OUTPUT SSR; Configuration: SINGLE; Minimum Operating Temperature: -30 Cel; Maximum On State Current: 3 A; Length: 57 mm; Maximum Operating Temperature: 80 Cel;
CPC1020NTR
Littelfuse
CPC1020NTR by Littelfuse is a SINGLE MOSFET SSR with 0.05A max forward current, 1.2A max on-state current, and 0.25 ohm max on-state resistance. Ideal for DC input applications requiring optoelectronic TRANSISTOR OUTPUT SSRs with 1500V isolation voltage in a compact design.
AQV253H
Panasonic
Panasonic AQV253H is a solid state relay with max. forward current of 0.05A, optoelectronic transistor output SSR type, and max. operating temp of 85°C. Ideal for applications requiring low on-state resistance (8Ω), high isolation voltage (5000V), and max. on-state current of 0.2A in industrial settings.
AQV251A
Panasonic AQV251A is a solid state relay with built-in diode, ideal for applications requiring low forward current (0.05 A) and high isolation voltage (1500 V). With a max on-state resistance of 1 ohm, it operates efficiently in temperatures ranging from -40 to 85 °C. Suitable for various optoelectronic transistor output SSR applications.
DRA1-CX240D5
TRIGGER OUTPUT SSR; Mounting Feature: PANEL MOUNT; Maximum Isolation Voltage: 4000 V; Additional Features: IEC-62314, UL RECOGNIZED; Control Voltage: 3 V; Length: 89.6 mm;
CPC1390GR
CPC1390GR by Littelfuse is a SINGLE solid state relay with TRANSISTOR OUTPUT SSR. It has a max forward current of 0.05A, on-state resistance of 22 ohm, and isolation voltage of 5000V. Ideal for applications requiring reliable switching in temperatures ranging from -40 to 85°C.
MCX240D5R
Crydom
The Crydom MCX240D5R is a solid state relay with a control current of 0.015 A and max on-state current of 5 A. Featuring trigger output SSR optoelectronic type, it operates at temperatures from -40 to 80°C. Ideal for DC input applications requiring high isolation voltage up to 4000 V, with compact dimensions of 25.4 mm height and 43.1 mm length.
Hbcontrols
TRANSISTOR OUTPUT SSR; Length: 57 mm; Input Type: DC; Maximum On State Current: 3 A; Height: 22 mm; Maximum Operating Temperature: 80 Cel;
GN325DLZ
Crouzet
Solid State Relays; Maximum Operating Temperature: 80 Cel; Length: 101.29 mm; Minimum Operating Temperature: -40 Cel; Input Type: DC; Control Current: .024 A;
DC100D20
The Crydom DC100D20 is a TRANSISTOR OUTPUT SSR with 20A max on-state current, 0.017 ohm max on-state resistance, and 2500V max isolation voltage. Ideal for applications requiring reliable solid state switching in temperatures ranging from -30°C to 80°C.
LCC110PTR
IXYS Corporation
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); No. of Elements: 1; Minimum Operating Temperature: -40 Cel; Maximum Isolation Voltage: 3750 V; Control Voltage: .9 V;
AQY210EHAX
Panasonic AQY210EHAX is a SINGLE Solid State Relay with 0.05A Max Forward Current and 25 ohm Max On State Resistance. Ideal for DC input applications, it features TRANSISTOR OUTPUT SSR Optoelectronic Type and MOSFET Output Circuit Type, operating b/w -40 to 85 °C.
ASSR-4118-503E
Broadcom
Broadcom's ASSR-4118-503E is a MOSFET output SSR with max. forward current of 0.02A, isolation voltage of 3750V, and on-state resistance of 35 ohm. Ideal for DC input applications requiring precise control currents up to 0.003A in a compact package measuring 4.3mm x 2.1mm for temp range -40°C to +85°C.
AQH3213
Aromat
TRIGGER OUTPUT SSR; Configuration: SINGLE; Minimum Operating Temperature: -30 Cel; Maximum Operating Temperature: 85 Cel; Packing Method: TUBE; Additional Features: UL RECOGNIZED, VDE APPROVED, ZERO VOLTAGE CROSSING;
AQY412SX
The Panasonic AQY412SX is a single solid state relay with a max forward current of 0.005A and on-state resistance of 2.5 ohm. Ideal for applications requiring optoelectronic transistor output SSR, it operates b/w -40°C to 85°C with an isolation voltage of 1500V, making it suitable for various industrial control systems.
G3MB-202PLEG-4-DC20MA
Omron
Omron's G3MB-202PLEG-4-DC20MA is a SINGLE Solid State Relay with 2A On State Current, 0.02A Forward Current, and 2500V Isolation Voltage. Ideal for triggering output SSR applications in temperatures ranging from -30°C to 80°C.
AQV253
Solid State Relays; Terminal Finish: Tin/Lead (Sn/Pb); Minimum Operating Temperature: -20 Cel; Height: 3 mm; Input Type: DC; Control Voltage: 1.2 V;
PVG612S-TPBF
PVG612S-TPBF by Infineon Technologies is a SINGLE solid state relay with a control current of 0.005 A and max forward current of 0.025 A. Featuring a MOSFET output circuit type, it has a max on-state resistance of 0.5 ohm and isolation voltage of 4000 V. This optoelectronic transistor output SSR operates b/w -40 to 85 °C, making it ideal for DC input applications requiring high isolation and low on-state resistance.
AQY221N2VY
AQY221N2VY by Panasonic is a single solid state relay with a control current of 0.001 A and max forward current of 0.005 A. Featuring a MOSFET output circuit type, it operates b/w -40 to 85 °C and offers an isolation voltage of 1500 V. Ideal for DC input applications requiring low on-state resistance at 0.12 A.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SSR-240D25
TE Connectivity's SSR-240D25 is a COMPLEX solid state relay with trigger output. It has a max supply voltage of 32V, forward current of 0.015A, and can handle up to 25A on-state current. Ideal for chassis mounting applications, it offers high isolation voltage of 4000V and operates b/w -30°C to 80°C.
SSR240D25
Potter & Brumfield
Potter & Brumfield SSR240D25 is a Solid State Relay with Back to Back SCR output circuit. It operates b/w -25°C to 80°C, controlled by 3V DC input. With a compact size of 22mm height and 57.15mm length, it's ideal for industrial automation and temperature control applications.
SSR240D50
Potter & Brumfield SSR240D50 is a Solid State Relay with Back to Back SCR output circuit. It operates b/w -30°C to 80°C, with a control voltage of 3V DC. This relay, measuring 44mm in length and 21mm in height, is commonly used in industrial automation systems.
SSR-240D50
TE Connectivity's SSR-240D50 is a COMPLEX solid state relay with trigger output. It has a max supply voltage of 32V, forward current of 0.015A, and isolation voltage of 4000V. Ideal for chassis mounting applications, it can handle up to 50A on-state current at an operating temperature range from -30°C to 80°C.
SSR-240A50
TE Connectivity's SSR-240A50 is a COMPLEX solid state relay with trigger output. It supports max on-state current of 50A and has isolation voltage of 4000V. Ideal for chassis mounting applications, operating b/w -30°C to 80°C.
SSR240A50
Potter & Brumfield SSR240A50 is a Solid State Relay with Back to Back SCR output circuit. It operates b/w -30°C to 80°C, with a control voltage of 90V AC. Ideal for applications requiring reliable switching in compact spaces.
SSR240A25
Solid State Relays; Control Voltage: 90 V; Length: 44 mm; Maximum Operating Temperature: 80 Cel; Minimum Operating Temperature: -30 Cel; Height: 21 mm;
SSR-240A25
TRIGGER OUTPUT SSR; Mounting Feature: CHASSIS MOUNT; No. of Elements: 1; Maximum Isolation Voltage: 4000 V; Maximum Operating Temperature: 80 Cel; Maximum On State Current: 25 A;
SSR245DIN-DC45
Magnecraft
SSR210DIN-AC22
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved