Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Phase Noise: -90 dBc/Hz; Package Equivalence Code: LCC32,.2SQ,20; Modulation Sensitivity: 140 MHz/V;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
VCO Voltage Controlled Oscillators MAOC-009263-SMB003 attributes and parameters. Explore more VCO Voltage Controlled Oscillators devices from M/a-com Technology Solutions
Maximum Control Voltage:
Minimum Control Voltage:
Modulation Sensitivity:
Mounting Feature:
No. of Terminals:
Offset Frequency:
Maximum Operating Frequency:
Minimum Operating Frequency:
Maximum Operating Temperature:
Minimum Operating Temperature:
Oscillator Type:
Package Equivalence Code:
Phase Noise:
Physical Dimension:
Maximum Supply Current:
Maximum Supply Voltage:
Minimum Supply Voltage:
Nominal Supply Voltage:
MACOM designs and manufactures high-performance semiconductor products for the Telecommunications, Industrial and Defense and Datacenter industries. MACOM services over 6,000 customers annually with a broad product portfolio that incorporates RF, Microwave, Analog and Mixed Signal and Optical semiconductor technologies. MACOM has achieved certification to the IATF16949 automotive standard, the ISO9001 international quality standard and the ISO14001 environmental management standard. MACOM has more than 70 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operates facilities throughout the United States, Europe, and Asia.
LL4148
Itt Components
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .005 us; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Non Repetitive Peak Forward Current: 1 A;
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
SN65HVD234DR
Texas Instruments
SN65HVD234DR by Texas Instruments is an 8-terminal interface circuit with a data rate of 1 Mbps. Operating temperature ranges from -40 to 125 °C, making it ideal for automotive applications. With a supply voltage of 3.3 V and low current draw of 6 mA, it's suitable for network interfaces in compact designs.
AH180-WG-7
Diodes Incorporated
AH180-WG-7 by Diodes Inc. is a magnetic field sensor with 1.5mT hysteresis, 0.30V output range, and 9mA max operating current. Ideal for applications requiring non-inverting analog voltage output in a compact rectangular package suitable for surface mount installations.
STM32H743ZIT6
STMicroelectronics
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
LM555CMX
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N2222A
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
1N4148
Laube Technology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
USB3320C-EZK-TR
Standard Microsystems
INTERFACE CIRCUIT; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 32; Package Code: HVQCCN; Package Shape: SQUARE;
SMBJ18CA
Silicon Standard
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
LTC6990HS6#WTRMPBF
LTC6990HS6#WTRMPBF by Analog Devices is a VCO with 2-5.5V supply, 0.283mA current, and 2MHz frequency range. Ideal for AEC-Q100 applications in automotive electronics due to its CMOS technology and compact size of 2.9mm x 1.75mm x 1.0mm for surface mount installation.
HTO-1000R
Broadcom
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 8; Nominal Supply Voltage: 15 V; Minimum Operating Frequency: 1000 MHz; Physical Dimension: 12.7mm x 4.572mm;
MAX2624EUA
Maxim Integrated
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Minimum Operating Frequency: 947 MHz; Minimum Control Voltage: .4 V; Package Equivalence Code: TSSOP8,.19;
ROS-2150VW+
Mini-circuits
Mini-circuits ROS-2150VW+ VCO features 2150 MHz nominal frequency, -70 dBc/Hz phase noise, and 4 dBm output power. Ideal for applications requiring precise voltage-controlled oscillation in a compact 12.7mm x 12.7mm x 4.57mm package with modulation sensitivity of 70 MHz/V.
LTC6992IS6-1#TRMPBF
LTC6992IS6-1#TRMPBF by Analog Devices is a VCO with 6 terminals, operating from -40 to 85°C. It has a supply voltage range of 2.25V to 5.5V and operates b/w 0.00000318 MHz to 1 MHz. Ideal for applications requiring a compact surface-mount VCO with precise control over frequency modulation.
LTC6990IS6#WTRPBF
LTC6990IS6#WTRPBF by Analog Devices is a VCO with max supply voltage of 5.5V, operating freq. of 2MHz, and CMOS tech. Ideal for AEC-Q100 applications in automotive electronics due to its small size (2.9mm x 1.75mm x 1.0mm), low supply current (0.283mA), and wide temp range (-40°C to 85°C).
HMC535LP4
Analog Devices' HMC535LP4 is a VCO with 590 MHz/V modulation sensitivity, 6 dBm output power, and -110 dBc/Hz phase noise. Ideal for applications requiring precise frequency control in the range of 14.7-15.4 GHz, such as radar systems and communication equipment.
HMC358MS8G
HMC358MS8G by Analog Devices is a VCO with 3V supply, 100mA current, and 8dBm output power. Ideal for applications requiring a voltage-controlled oscillator with an operating frequency range of 5800-6800MHz. Its compact size (3.1mm x 3.1mm x 1.1mm) and surface mount feature make it suitable for various electronic systems.
HTO-12000R
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: CHASSIS MOUNT; Nominal Supply Voltage: 15 V; Maximum Control Voltage: 20 V; Minimum Operating Temperature: -54 Cel; Phase Noise: -48 dBc/Hz;
VTO-8650
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: THROUGH HOLE MOUNT; Nominal Supply Voltage: 15 V; Maximum Operating Temperature: 65 Cel; Maximum Control Voltage: 30 V; Minimum Control Voltage: 1 V;
HMC582LP5E
Hittite Microwave
VOLTAGE CONTROLLED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 32; Minimum Control Voltage: 2 V; Phase Noise: -110 dBc/Hz; Minimum Operating Frequency: 11100 MHz;
HMC514LP5TR
Analog Devices' HMC514LP5TR is a VCO with 3.25V max supply voltage, 290mA max supply current, and 5dBm output power. Ideal for applications requiring precise frequency control in the range of 11.17-12.02GHz, such as radar systems and communication equipment.
LTC6990CDCB#PBF
Linear Technology
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; Minimum Operating Frequency: .000488 MHz; Maximum Operating Temperature: 70 Cel; Minimum Supply Voltage: 2.25 V;
HMC535LP4TR
Analog Devices' HMC535LP4TR is a VCO with 590 MHz/V modulation sensitivity, -110 dBc/Hz phase noise, and 6 dBm output power. Ideal for applications requiring precise frequency control in the 14.7-15.4 GHz range, this VCO operates on a 5V supply voltage and features a compact 4.1mm x 4.1mm x 1.0mm package suitable for surface mount installations.
LTC6990HDCB#TRMPBF
LTC6990HDCB#TRMPBF by Analog Devices is a VCO with max supply voltage of 5.5V, current of 0.283mA, and operating frequency range from 0.000488MHz to 2MHz. Ideal for applications requiring digital tuned oscillators in compact designs with surface mounting feature.
HMC1165LP5ETR
Analog Devices' HMC1165LP5ETR is a VCO with 32 terminals, operating b/w -40 °C to 85°C. It offers modulation sensitivity of 310 MHz/V, output power of 8 dBm, and phase noise at -88 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 11.07 GHz to 11.62 GHz.
HMC1163LP5E
Analog Devices' HMC1163LP5E is a VCO with 300 MHz/V modulation sensitivity, -87 dBc/Hz phase noise, and 11 dBm output power. Ideal for applications requiring precise frequency control in the range of 9650-10410 MHz, such as radar systems and communication equipment.
LTC6990CS6#PBF
DIGITAL TUNED OSCILLATOR; Mounting Feature: SURFACE MOUNT; No. of Terminals: 6; JESD-609 Code: e3; Maximum Supply Voltage: 5.5 V; Maximum Operating Frequency: 2 MHz;
HMC358MS8GTR
HMC358MS8GTR by Analog Devices is a VCO with max supply voltage of 3.25V, output power of 8dBm, and phase noise of -110 dBc/Hz. Ideal for applications requiring precise frequency control in the range of 5.8-6.8 GHz, this compact device has a small form factor of 3.1mm x 3.1mm x 1.1mm and operates b/w -40 to +85 °C temperatures efficiently on a nominal voltage of 3V.
LTC6992CDCB-3#TRPBF
LTC6992CDCB-3#TRPBF by Analog Devices is a VCO with 6 terminals, operating at frequencies from 0.00000318 MHz to 1 MHz. It has a voltage control range of 0.1V to 0.9V and operates b/w -40°C to +70°C. This compact device in PLASTIC/EPOXY package is ideal for applications requiring precise voltage-controlled oscillation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
M/a-com Technology Solutions
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved