Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit DC Voltage: 170 V; Technology: METAL OXIDE FILM; Operating Voltage: 170 V; Package Style (Meter): Radial-var;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Non-linear Resistors V25S130PX2855 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Maximum Circuit RMS Voltage:
Maximum Energy Absorbing Capacity:
JESD-609 Code:
Mounting Type:
Package Style (Meter):
Resistor Type:
Sub-Category:
Technology:
Terminal Finish:
Operating Voltage:
V25S130PX2855 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
LM358AN
NXP Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
261
Deltrol Controls
Other Relays;
Rectron
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
43025-0400
Molex
The Molex 43025-0400 is a board connector with 4 contacts, 2 rows, and a mating contact pitch of 0.118". It has a body length of 0.27", insulation resistance of 1Gohm, and operates b/w -40 to 105°C. Ideal for commercial applications requiring a female connector with crimp termination and UL94V-0 flammability rating.
2N2222A
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
M39029/56-351
TE Connectivity
TE Connectivity's M39029/56-351 is a CRIMP contact type backshell accessory with rated voltage of 115V. It operates b/w -65 to 175 °C, suitable for MIL-C-39029/56 connectors with wire gauge ranging from 28 to 22 AWG. Ideal for military applications requiring female contacts and copper alloy material.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
Kec
RECTIFIER DIODE; Surface Mount: NO; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Non Repetitive Peak Forward Current: 2 A; Config: SINGLE; Maximum Operating Temperature: 200 Cel;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
LL4148
Formosa Microsemi
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F401CDY6TR
STM32F401CDY6TR by STMicroelectronics is a 32-bit microcontroller with 393216 ROM words, 50 MHz clock frequency, and 36 I/O lines. It is used in applications requiring high-speed processing, such as industrial automation and consumer electronics.
Hi-tron Semiconductor
Telcom Semiconductor
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
RXEF090-2
TE Connectivity's RXEF090-2 is a PTC resettable fuse with resistance of 0.47 ohm and rated power dissipation of 0.99W. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C, featuring radial terminal placement in disk package.
TRF250-145
TE Connectivity's TRF250-145 is a PTC resettable fuse with 60V operating voltage and 1W power dissipation. Ideal for temperature sensing applications, it features radial terminal placement in a disk package measuring 6.5mm x 4.6mm x 11mm. With CSA, TUV, and UL certifications, it operates b/w -40°C to 85°C.
SIOV-S20K275
TDK
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1 W; Maximum Operating Temperature: 105 Cel; Tolerance: 10 %; Reference Standard: UL, CSA;
RUEF250U
TE Connectivity's RUEF250U is a PTC resettable fuse with rated power dissipation of 1.2W and operating voltage of 100V. It is used for temperature sensing applications, featuring radial terminal placement and rectangular package shape. The thermistor has dimensions of 8.1mm x 2.8mm x 16.3mm, suitable for through-hole mounting in various electronic devices.
B57237-S509-M
TDK B57237-S509-M NTC Thermistor with 5 ohm resistance, 265 V URac, and 3.1 W rated power dissipation. Ideal for soft start applications due to its thermal sensitivity index of 2900 K and -55 to 170 °C operating temperature range.
0ZCH0050FF2G
Bel Fuse
Bel Fuse's 0ZCH0050FF2G is a PTC thermistor resistor with dual-ended terminal placement and a matte tin finish. It is used for temperature sensing applications, has a max operating temperature of 85°C, and can handle a max circuit DC voltage of 16V.
RF2631-000
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 4.4 ohm; Rated Power Dissipation (P): .41 W; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING;
B72214S0251K101
B72214S0251K101 by TDK is a VARISTOR with 65J energy capacity, 250V RMS voltage, and 320V operating voltage. It is used for surge protection in applications requiring high reliability and durability. The METAL OXIDE technology and radial package make it suitable for various industrial environments.
NANOSMDC020F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .65 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Length (Package): 3.4 mm;
GA10K4A1A
TE Connectivity's GA10K4A1A is a non-linear resistor with 2 terminals, operating b/w -40°C to 125°C. With a length of 76mm, it is ideal for temperature sensing applications.
RUEF400K-AP
PTC RESETTABLE FUSE; Manufacturer Series: RUEF;
MOV-10D201KTR
Bourns
MOV-10D201KTR by Bourns is a VARISTOR with 30J energy capacity, 130V RMS voltage, and 170V operating voltage. It is used for surge protection in applications requiring high transient suppression capabilities. The device has radial terminal placement, metal oxide film technology, and a disk package shape.
NCP18XH103F03RB
Murata Manufacturing
Murata Manufacturing's NCP18XH103F03RB is a 10000 ohm NTC thermistor with dual-ended terminals, SMT package style, and 1% tolerance. It is used for temperature sensing applications with an operating voltage of 5V and a thermal sensitivity index of 3380K. The thermistor has a max operating temperature of 125°C and min of -40°C, making it suitable for various temperature monitoring systems.
B72220-S250-K101
The TDK B72220-S250-K101 is a VARISTOR with 25V RMS and 31V DC max circuit voltage. It has a 22J energy capacity, -40 to 85°C operating temp range, and RADIAL terminals. Ideal for surge protection in THROUGH HOLE MOUNT applications.
NTC0805J10K
Tyco Electronics Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 5 %;
V5.5MLA0603NHX2888
V5.5MLA0603NHX2888 by Littelfuse is a VARISTOR with 5.5V operating voltage and 0.1J energy absorption capacity. It has dual-ended terminals, matte tin finish, and operates b/w -55°C to 150°C. Ideal for surface mount applications requiring protection against voltage surges in electronic circuits.
RXEF250K
TE Connectivity's RXEF250K is a PTC thermistor with resistance of 0.05 ohm, rated power dissipation of 2.5W, and URac of 72V. It is used for temperature sensing applications due to its radial terminal placement and disk package shape. Operating temperatures range from -40°C to 85°C making it suitable for various environments.
B72207-S301-K101
The TDK B72207-S301-K101 is a VARISTOR with 300V max RMS voltage and 23J energy absorption. Suitable for applications requiring protection against voltage surges, it has a radial terminal placement and disk package shape. Operating temperature ranges from -40 to 85°C, making it ideal for various electronic devices.
TFPT1206L6800FV
Vishay Intertechnology's TFPT1206L6800FV is a PTC thermistor with 680 ohm resistance, 1% tolerance, and 0.125 W power dissipation. It is used for temperature sensing applications due to its dual-ended terminal placement and rectangular package shape. Operating b/w -55°C to 125°C, it features tin over nickel terminal finish for surface mounting method.
RXEF025-2
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Additional Features: 1.25-1.95 OHMS AT 20 DEG CEL; Terminal Placement: RADIAL;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V25S140P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 285 J;
V25S130PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Operating Voltage: 170 V; Maximum Circuit DC Voltage: 170 V; Package Style (Meter): Radial-var;
V25S250P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; Terminal Placement: RADIAL;
V25S150PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial-var; Technology: METAL OXIDE FILM; Maximum Circuit RMS Voltage: 150 V; Operating Voltage: 200 V;
V25S230PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial-var; Maximum Circuit RMS Voltage: 230 V; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 400 J;
V25S140PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit DC Voltage: 180 V; Package Style (Meter): Radial-var; Maximum Circuit RMS Voltage: 140 V; Technology: METAL OXIDE FILM;
V25S250PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Technology: METAL OXIDE FILM; Maximum Circuit RMS Voltage: 250 V; Operating Voltage: 320 V; Maximum Energy Absorbing Capacity: 435 J;
V25S115PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit DC Voltage: 150 V; Operating Voltage: 150 V; Package Style (Meter): Radial-var; Technology: METAL OXIDE FILM;
V25S150PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial-var; JESD-609 Code: e3; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: 300 J;
V25S175P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Length (Package): 26.5 mm; Width (Package): 6.3 mm;
V25S230P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Width (Package): 6.4 mm; Maximum Circuit DC Voltage: 300 V;
V25S140PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Operating Voltage: 180 V; Maximum Energy Absorbing Capacity: 285 J; Maximum Circuit DC Voltage: 180 V; Technology: METAL OXIDE FILM;
V25S230PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Terminal Finish: TIN OVER NICKEL; Maximum Circuit RMS Voltage: 230 V; Maximum Circuit DC Voltage: 300 V; Package Style (Meter): Radial-var;
V25S130P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Package Style (Meter): Radial; Terminal Placement: RADIAL;
V25S150P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Maximum Circuit DC Voltage: 200 V; Packing Method: BULK;
V25S115P
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Rated Power Dissipation (P): 1.5 W; Maximum Operating Temperature: 125 Cel; Technology: METAL OXIDE FILM; Maximum Circuit RMS Voltage: 115 V;
V25S115PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Energy Absorbing Capacity: 230 J; Operating Voltage: 150 V; Technology: METAL OXIDE FILM; JESD-609 Code: e3;
V25S175PX1347
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Package Style (Meter): Radial-var; Maximum Energy Absorbing Capacity: 315 J; Maximum Circuit DC Voltage: 225 V; Operating Voltage: 225 V;
V25S175PX2855
VARISTOR; Mounting Type: THROUGH HOLE MOUNT; Maximum Circuit RMS Voltage: 175 V; Operating Voltage: 225 V; Technology: METAL OXIDE FILM; Maximum Circuit DC Voltage: 225 V;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved