Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; Technology: METAL OXIDE FILM; Height (Package): 1 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Non-linear Resistors V0603MHS12FH attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
Maximum Circuit DC Voltage:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Rated Temperature:
Resistor Type:
Technology:
Terminal Placement:
Terminal Shape:
Operating Voltage:
V0603MHS12FH Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.40.00
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
1N4148WS
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
KSZ9031RNXIA
Microchip Technology
KSZ9031RNXIA by Microchip is a 48-terminal Ethernet transceiver with data rate of 1000 Mbps. Operating temperature range from -40 to 85°C makes it suitable for industrial applications. This square-shaped chip carrier has a very thin profile and matte tin finish, ideal for network interfaces.
2N7002
Central Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .115 A; Maximum Drain Current (Abs) (ID): .115 A;
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
LL4148
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1554216004
Molex
WIRE AND CABLE;
SMBJ18CA
Yageo
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SS14
Changzhou Starsea Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Philips Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Semiconductors
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
1N4148
Dc Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Microsemi
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
International Components
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Maximum Reverse Recovery Time: .004 us;
2920L030DR
Littelfuse
2920L030DR by Littelfuse is a PTC resettable fuse with resistance of 1.2 ohm and operating voltage of 60V. It is used for overcurrent protection, featuring dual-ended terminals in a rectangular SMT package. This thermistor has dimensions of 7.98mm x 5.44mm x 1.25mm and operates b/w -40°C to 85°C.
NTCLE100E3472HB0
Vishay Intertechnology
Vishay Intertechnology NTCLE100E3472HB0 is a 4700 ohm NTC thermistor with -40 to 125 °C operating range. Ideal for temperature sensing applications, it has radial terminal placement and matte tin finish. With 3% tolerance and 0.5 W power dissipation, it offers high thermal sensitivity index of 3977 K.
B59755C0115A070
TDK
The TDK B59755C0115A070 is a PTC thermistor with 500 ohm resistance and 550V operating voltage. It is used for overcurrent protection in applications requiring radial terminal placement. With a temperature range of -40 to 125 °C, it meets IEC and UL standards for through-hole mounting.
NTCS0603E3103FMT
Vishay Bc Components
NTC THERMISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10000 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 150 Cel; Tolerance: 1 %;
B72220P3301K101
The TDK B72220P3301K101 is a VARISTOR with 305J energy capacity, 385V operating voltage, and 1W power dissipation. It is used for surge protection in circuits with up to 300V RMS voltage. Ideal for applications requiring high transient voltage suppression in radial through-hole mounting setups.
ASMD075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .29 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Terminal Finish: Tin (Sn);
MF-MSMF050-2
Bourns
The Bourns MF-MSMF050-2 is a PTC resettable fuse with resistance of 0.15 ohm and operating voltage of 15V. It is used for overcurrent protection in automotive applications, featuring dual-ended terminals and surface mounting type. AEC-Q200, CUL, TUV, and UL standards are met by this SMT package with gold over nickel terminal finish.
MICROSMD050F-2
TE Connectivity
TE Connectivity's MICROSMD050F-2 is a PTC resettable fuse with 2 terminals, rated for 13.2V AC voltage and 0.8W power dissipation. It is used for temperature sensing applications, featuring dual-ended terminal placement in a rectangular package suitable for surface mounting at up to 85°C operating temperature.
MF-SM030-2-99
Bourns MF-SM030-2-99 is a PTC resettable fuse with 60V URac, 1.7W P, and -40 to 85°C operating range. It offers overload protection in surface mount applications with dual-ended terminals in a rectangular package.
RXEF005
TE Connectivity's RXEF005 is a PTC resettable fuse with 20 ohm resistance and rated AC voltage of 60V. Ideal for temperature sensing applications, it has a max operating temp of 85°C and min of -40°C. With radial terminal placement and disk package shape, it is mounted through hole for bulk packing.
RF1334-000
TE Connectivity's RF1334-000 is a PTC resettable fuse with 1.5 ohm resistance and 60V operating voltage. It features dual-ended terminals, SMT package style, and wraparound terminal shape for overcurrent protection applications. This non-linear resistor has a max operating temperature of 85°C and meets TUV and UL standards for surface mounting method.
EZJPZV270RA
Panasonic
The Panasonic EZJPZV270RA is a varistor with 16V operating voltage and -40 to 85°C temperature range. It features dual-ended terminals in a rectangular SMT package for surface mounting applications. With matte tin finish, it offers protection against overvoltage in electronic circuits.
MF-R050-AP-99
The Bourns MF-R050-AP-99 is a PTC resettable fuse with 60V operating voltage. It offers overcurrent protection in radial disk package for through-hole mounting. With CUL, TUV, and UL certifications, it has a temperature range of -40 to 85°C making it ideal for various electronic applications.
NTCS0603E3472FHT
NTCS0603E3472FHT by Vishay Intertechnology is a NTC thermistor with 4700 ohm resistance, 1% tolerance, and 3830 K thermal sensitivity index. It is used for temperature sensing applications in automotive electronics due to its -40 to 150 °C operating range and AEC-Q200, CUL, UL standards compliance.
B59980-C80-A70
TDK B59980-C80-A70 is a PTC thermistor with 25 ohm resistance, rated for 63V AC voltage. It is used for overload protection in applications requiring radial terminal placement and disk package shape. Operating temperature ranges from -40°C to 125°C with a tolerance of 25%.
NB20N50104JBA
KYOCERA AVX
NB20N50104JBA by KYOCERA AVX is a NTC thermistor with 100000 ohm resistance, 5% tolerance, and 0.24 W power dissipation. It is used for temperature compensation in various applications due to its thermal sensitivity index of 4160 K and operating temperature range from -55 to 150 °C. The dual-ended terminal placement and SMT package style make it suitable for surface mount installations.
RXEF185-1
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Additional Features: 0.08-0.12 OHMS AT 20 DEG CEL; No. of Terminals: 2; Terminal Shape: WIRE;
0603L100SLYR
0603L100SLYR by Littelfuse is a PTC resettable fuse with resistance of 0.04 ohm, operating voltage of 6V, and rated power dissipation of 0.6W. It is used for overcurrent protection in applications requiring dual-ended terminal placement and surface mounting type.
SL321R036
Ametherm
Ametherm's SL321R036 is a 1 ohm NTC thermistor with 20% tolerance. It features radial terminal placement in a disk package, suitable for temperature sensing applications. With through-hole mounting and wire terminals, it offers precise thermal measurement capabilities.
V10E150PL1T
V10E150PL1T by Littelfuse is a VARISTOR with 150V RMS and 200V DC max circuit voltage. It has METAL OXIDE FILM tech, 30J energy absorption, and -55 to 85°C operating temp range. Ideal for surge protection in various applications due to its high energy capacity and radial terminal placement.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
V0603MHS12H
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Maximum Energy Absorbing Capacity: .025 J; Technology: METAL OXIDE FILM; Terminal Shape: WRAPAROUND;
V0603MHS03R
VARISTOR; Mounting Type: SURFACE MOUNT; Operating Voltage: 42 V; Package Style (Meter): Chip / Die; Maximum Circuit DC Voltage: 42 V; Technology: METAL OXIDE FILM;
V0603MHS03H
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Operating Voltage: 42 V; Technology: METAL OXIDE FILM; Maximum Energy Absorbing Capacity: .01 J;
V0603MHS12FR
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Technology: METAL OXIDE FILM; Length (Package): 1.6 mm; Operating Voltage: 18 V;
V0603MHS03WH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Finish: Silver (Ag); Terminal Placement: DUAL; No. of Terminals: 2;
V0603MHS03NT
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Length (Package): 1.6 mm; No. of Terminals: 2; Terminal Shape: WRAPAROUND;
V0603MHS12N
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Terminal Shape: WRAPAROUND; Package Style (Meter): Chip / Die; Maximum Circuit DC Voltage: 18 V;
V0603MHS03FH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; No. of Terminals: 2; Height (Package): 1 mm; Length (Package): 1.6 mm;
V0603MHS03T
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Terminal Shape: WRAPAROUND; Terminal Placement: DUAL ENDED; Maximum Circuit DC Voltage: 42 V;
V0603MHS03N
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Package Style (Meter): Chip / Die; Terminal Placement: DUAL ENDED; JESD-609 Code: e3;
V0603MHS03WT
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Terminal Placement: DUAL; Terminal Shape: WRAPAROUND; Packing Method: TR, 13 INCH;
V0603MHS03NR
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Height (Package): 1 mm; Terminal Shape: WRAPAROUND; Rated Temperature: 125 Cel;
V0603MHS12FT
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Operating Voltage: 18 V; Maximum Circuit DC Voltage: 18 V; Terminal Shape: WRAPAROUND;
V0603MHS03FT
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Terminal Shape: WRAPAROUND; Height (Package): 1 mm; Width (Package): .8 mm;
V0603MHS03NTX2965
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Packing Method: TR, PLASTIC, 13 INCH; Terminal Placement: DUAL ENDED; Shape (Package): RECTANGULAR PACKAGE;
V0603MHS03
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; Rated Temperature: 125 Cel; Minimum Operating Temperature: -55 Cel; JESD-609 Code: e4;
V0603MHS03FR
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Minimum Operating Temperature: -40 Cel; Length (Package): 1.6 mm; Height (Package): 1 mm;
V0603MHS03NH
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 150 Cel; Terminal Placement: DUAL ENDED; No. of Terminals: 2; Rated Temperature: 125 Cel;
V0603MHS12
VARISTOR; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 125 Cel; JESD-609 Code: e4; Terminal Placement: DUAL; Rated Temperature: 125 Cel;
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved