Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PLA134S by Littelfuse is a single configuration solid state relay with a control current of 0.005 A and max forward current of 0.005 A. It has a MOSFET output circuit type and can operate at temperatures ranging from -40 to 85 °C. This SSR is commonly used in DC input applications requiring high isolation voltage and low on-state resistance.
Median Price
$11.054
Lifecycle Status
Suppliers In-Stock
11
In-Stock Inventory
1k+
Arrow
1+ parts
$1.968
100+ parts
-
1k+ parts
10k+ parts
Master Electronics
$69.780
$59.110
Future Electronics
$5.970
$5.890
Verical
$16.137
TME
$17.940
$11.780
$9.490
Nova Conductors
Sensible Micro Corp
$1.349
$1.136
NAC Semi
$10.240
Vyrian
Resion
Electronics Depot
Ampacity Inc.
$1.670
AZTECH Wire
$14.775
Aranea Global
$57.928
$55.611
Continental Prestige Electronics
Metaverse IC Inc.
Authorized Procurement Solutions
Argo Parts USA
This product has a single configuration, making it simple and straightforward to use.
With a low control current, this solid state relay is energy-efficient and provides precise control.
The low maximum forward current ensures safe and reliable operation for your electronic devices.
Featuring a transistor output optoelectronic type, this relay offers enhanced performance and durability.
The MOSFET output circuit type of this relay guarantees a fast and efficient switching operation.
Capable of withstanding high temperatures, this relay is suitable for a wide range of applications.
The compact height of this product allows for space-saving installation in tight environments.
Designed to operate in extremely low temperatures, this relay ensures reliable performance even in harsh conditions.
The low control voltage requirement makes this relay compatible with various control systems and reduces power consumption.
With a single element, this relay simplifies installation and maintenance processes.
Packaged in tubes, this relay is conveniently organized and protected during transportation and storage.
The low on-state resistance of this relay results in minimal power loss and efficient switching.
The high isolation voltage ensures reliable separation between input and output, enhancing safety in circuits.
Designed for DC input signals, this relay is suitable for a wide range of DC-controlled applications.
With a compact length, this product offers versatility and ease of installation in various systems.
The surface mounting feature allows for convenient and secure placement on circuit boards.
Capable of handling high on-state currents, this relay is ideal for powering devices that require a significant amount of current.
Solid State Relays PLA134S attributes and parameters. Explore more Solid State Relays devices from Littelfuse
Additional Features:
Configuration:
Control Current:
Control Voltage:
Maximum Forward Current:
Input Type:
Maximum Isolation Voltage:
Mounting Feature:
No. of Elements:
Maximum On State Current:
Maximum On State Resistance:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Output Circuit Type:
Height:
Length:
Packing Method:
PLA134S Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.95.00
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
2N7002-T1-E3
Vishay Intertechnology
Vishay Intertechnology's 2N7002-T1-E3 is a N-CHANNEL FET for SWITCHING applications. Features include 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. With ENHANCEMENT MODE operation, this GULL WING transistor is ideal for small outline surface mount designs up to 150°C.
1N4148
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LL4148
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
GRM155R71H103KA88D
Murata Manufacturing
The Murata Manufacturing GRM155R71H103KA88D is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and high reliability.
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
FDN306P
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Maximum Drain Current (Abs) (ID): 2.6 A; Operating Mode: ENHANCEMENT MODE;
SMBJ18CA
Microsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Maximum Drain Current (ID): .34 A;
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
ERJ6ENF10R0V
Panasonic
Panasonic ERJ6ENF10R0V is a 10 ohm fixed resistor with 1% tolerance, suitable for surface mount applications. With a rated power dissipation of 0.125W and operating voltage of 150V, it operates b/w -55°C to 155°C. Its metal glaze/thick film technology ensures stable performance in various electronic circuits.
1N4148WT
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Package Shape: RECTANGULAR; Terminal Finish: Matte Tin (Sn) - annealed;
LM107H
Intersil
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Nominal Common Mode Reject Ratio: 96 dB;
LAN8720AI-CP-TR
Microchip Technology
LAN8720AI-CP-TR by Microchip is an Ethernet transceiver with 100 Mbps data rate, operating at -40 to 85 °C. It features a 3.3 V supply voltage, 54 mA supply current, and TS 16949 screening level. Ideal for network interfaces in industrial applications due to its compact square package and low profile design.
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
CPC1976YX6
IXYS Corporation
TRIGGER OUTPUT SSR;
CPC1709J
Littelfuse
The Littelfuse CPC1709J is a single solid state relay with a max forward current of 0.1A and MOSFET output circuit type. It operates b/w -40°C to 85°C, has a max isolation voltage of 2500V, and can handle up to 9A on-state current. Ideal for DC input applications requiring low on-state resistance and high isolation levels.
PLA192STR
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Additional Features: CMOS COMPATIBLE, HIGH RELIABILITY, UL RECOGNIZED; Maximum Isolation Voltage: 5000 V; Maximum On State Resistance: 22 ohm; Maximum Operating Temperature: 85 Cel;
DC100D40C
Sensata Technologies
TRANSISTOR OUTPUT SSR; Maximum On State Resistance: .015 ohm; Maximum Forward Current: .012 A; Maximum On State Current: 40 A; No. of Elements: 1; Maximum Operating Temperature: 80 Cel;
S216S02F
Sharp Corporation
Sharp Corporation's S216S02F is a SINGLE TRIGGER OUTPUT SSR with 16A max on-state current, 0.05A max forward current, and 4000V max isolation voltage. Ideal for applications requiring reliable solid state relay performance in temperatures ranging from -25°C to 100°C.
MCX240D5
TRIGGER OUTPUT SSR; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; Output Circuit Type: Back to Back SCR; Minimum Operating Temperature: -40 Cel; Control Current: .015 A; JESD-609 Code: e3;
CPC1909J
Ixys Integrated Circuits Division
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; Terminal Finish: MATTE TIN; Maximum Forward Current: .1 A; Configuration: SINGLE; No. of Elements: 1;
CPC2030NTR
CPC2030NTR by Littelfuse is a Solid State Relay with 2 separate elements, max. forward current of 0.05A, and transistor output SSR type. Operating temp: -40 to 85°C. Ideal for applications requiring high isolation voltage (1500V), low on-state resistance (30Ω), and max on-state current of 0.12A in compact TR packaging.
CPC1510GS
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Height: 3.3 mm; Input Type: DC; JESD-609 Code: e3; Control Current: .005 A;
AQH2213AX
Aromat
TRIGGER OUTPUT SSR; Maximum Forward Current: .05 A; Packing Method: TR; Minimum Operating Temperature: -30 Cel; No. of Elements: 1; Maximum Operating Temperature: 85 Cel;
PVT322APBF
PVT322APBF by Infineon Technologies is a solid state relay with separate configuration and 2 elements. It has a control current of 0.002 A and max forward current of 0.025 A. This transistor output SSR is commonly used in applications requiring DC input, with a max on-state current of 0.17 A and isolation voltage of 4000 V.
PVDZ172NPBF
International Rectifier
TRANSISTOR OUTPUT SSR; Terminal Finish: MATTE TIN; Length: 9.4 mm; Maximum On State Current: 1.5 A; Maximum Operating Temperature: 85 Cel; No. of Elements: 1;
CPC1016NTR
CPC1016NTR by Littelfuse is a SINGLE MOSFET SSR with 0.002 A control current, 0.05 A max forward current, and 16 ohm on-state resistance. Ideal for DC input applications requiring high isolation voltage of 1500 V, operating b/w -40 to 85 °C in compact spaces due to its 2.18 mm height and 4.1 mm length.
LH1522AACTR
TRANSISTOR OUTPUT SSR; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .05 A; JESD-609 Code: e0; Configuration: SEPARATE, 2 ELEMENTS; Maximum Isolation Voltage: 5300 V;
G3VM-61VR(TR)
Omron
Omron's G3VM-61VR(TR) is a solid state relay with max. forward current of 0.025A, MOSFET output circuit type, and max. isolation voltage of 3750V. Ideal for applications requiring surface mounting feature, it operates b/w -20°C to 100°C and has a max. on-state current of 1.4A.
The Littelfuse CPC1510GS is a single solid state relay with a control current of 0.005 A and max forward current of 0.05 A. Featuring a MOSFET output circuit type, it has a max isolation voltage of 3750 V and operates b/w -40 to 85°C. Ideal for DC input applications requiring low on-state resistance at 15 ohms and high on-state current up to 0.45 A in compact spaces with its height of 3.3 mm and length of 8.38 mm, making it suitable for various industrial automation systems.
CPC1019NTR
TRANSISTOR OUTPUT SSR; Maximum Forward Current: .05 A; Minimum Operating Temperature: -40 Cel; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Maximum On State Resistance: .6 ohm;
AQY280S
The Panasonic AQY280S is a single solid state relay with a max forward current of 0.05A and on-state resistance of 25 ohm. It features a transistor output SSR optoelectronic type, operates b/w -40 to 85°C, and offers an isolation voltage of 1500V. Ideal for applications requiring precise switching in industrial automation systems.
CPC1976Y
TRIGGER OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Isolation Voltage: 3750 V; Minimum Operating Temperature: -40 Cel; Maximum On State Current: 2 A; Additional Features: UL RECOGNIZED, ZERO VOLTAGE CROSSING;
TLP172AM(TPR,E(O
Toshiba
Toshiba's TLP172AM(TPR,E(O is a solid state relay with 0.025A max forward current, 2 ohm max on-state resistance, and 3750V max isolation voltage. Ideal for applications requiring single configuration with built-in diode, such as temperature control systems or industrial automation equipment.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
PLA134
Crydom
TRANSISTOR OUTPUT SSR; Maximum On State Resistance: 5 ohm; No. of Elements: 1; Configuration: SINGLE; Maximum Forward Current: .03 A; Maximum Isolation Voltage: 3750 V;
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum On State Resistance: 3 ohm; Length: 8.36 mm; JESD-609 Code: e3; Configuration: SINGLE;
TRANSISTOR OUTPUT SSR; Mounting Feature: THROUGH HOLE MOUNT; Maximum Forward Current: .005 A; Maximum On State Current: .35 A; Maximum On State Resistance: 3 ohm; Length: 8.382 mm;
TRANSISTOR OUTPUT SSR; Maximum On State Resistance: 14 ohm; Maximum Forward Current: .03 A; Maximum Isolation Voltage: 3750 V; Configuration: SINGLE; No. of Elements: 1;
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Maximum On State Resistance: 22 ohm; Packing Method: TR;
PLA134S
TRANSISTOR OUTPUT SSR; Maximum On State Resistance: 5 ohm; Configuration: SINGLE; Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .03 A; No. of Elements: 1;
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Height: 3.3 mm; No. of Elements: 1; Output Circuit Type: MOSFET; Maximum On State Resistance: 3 ohm;
PLA134STR
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Control Voltage: .9 V; Output Circuit Type: MOSFET; Height: 3.3 mm; Additional Features: CMOS COMPATIBLE, HIGH RELIABILITY, UL RECOGNIZED;
TRANSISTOR OUTPUT SSR; Mounting Feature: SURFACE MOUNT; No. of Elements: 1; Configuration: SINGLE; Input Type: DC; Height: 3.302 mm;
TRANSISTOR OUTPUT SSR; Configuration: SINGLE; No. of Elements: 1; Maximum Isolation Voltage: 3750 V; Maximum On State Resistance: 5 ohm; Maximum Forward Current: .03 A;
PLA132STR
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; No. of Elements: 1; Length: 8.36 mm; Maximum On State Current: .6 A;
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Operating Temperature: 85 Cel; Height: 3.3 mm; Output Circuit Type: MOSFET; Configuration: SINGLE;
PLA140STR
The Littelfuse PLA140STR is a SINGLE MOSFET SSR with 0.005 A control current and 0.05 A max forward current. Ideal for DC input applications, it offers 3750 V isolation voltage, 0.9 V control voltage, and 3 ohm on-state resistance. With a compact height of 3.3 mm and length of 8.38 mm, it operates b/w -40 to 85 °C, making it suitable for various industrial automation systems.
TRANSISTOR OUTPUT SSR; Configuration: SINGLE; Maximum On State Resistance: 9 ohm; No. of Elements: 1; Maximum Isolation Voltage: 3750 V; Maximum Forward Current: .03 A;
TRANSISTOR OUTPUT SSR; Terminal Finish: Tin (Sn); Maximum On State Resistance: 3 ohm; Output Circuit Type: MOSFET; Input Type: DC; Minimum Operating Temperature: -40 Cel;
PLA150S
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Maximum Forward Current: .05 A; Configuration: SINGLE; Input Type: DC; Additional Features: UL RECOGNIZED, HIGH RELIABILITY, CMOS COMPATIBLE;
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Control Current: .005 A; No. of Elements: 1; Maximum Operating Temperature: 85 Cel; Configuration: SINGLE;
PLA170S
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Configuration: SINGLE; Maximum Isolation Voltage: 3750 V; Additional Features: CMOS COMPATIBLE, HIGH RELIABILITY, UL RECOGNIZED; Maximum On State Resistance: 50 ohm;
PLA140LS
TRANSISTOR OUTPUT SSR; Terminal Finish: Matte Tin (Sn); Minimum Operating Temperature: -40 Cel; Additional Features: CMOS COMPATIBLE, HIGH RELIABILITY, UL RECOGNIZED; Maximum Isolation Voltage: 3750 V; Maximum On State Current: .2 A;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved