Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .03 ohm; Maximum Operating Temperature: 85 Cel; Thermistor Application: OVERCURRENT PROTECTION; Operating Voltage: 9 V;
Median Price
$0.244
Lifecycle Status
Suppliers In-Stock
23
In-Stock Inventory
1k+
Arrow
1+ parts
$0.208
100+ parts
$0.156
1k+ parts
$0.154
10k+ parts
-
Newark
$0.508
$0.299
$0.229
$0.220
Mouser Electronics
$0.510
$0.355
$0.257
$0.200
DigiKey
$0.191
Chip1Stop
$0.185
Verical
Farnell
$0.281
$0.216
$0.212
Element14
$0.346
$0.222
$0.219
Nova Conductors
$0.192
Maritex
$0.450
$0.311
$0.226
$0.176
Chip Stock
Sensible Micro Corp
ComSIT Distribution GmbH
NAC Semi
$0.268
Vyrian
IBS Electronics
Rebound Electronics
Electronics Depot
Inventory MP
Bristol Electronics
Schukat
$0.392
$0.307
ACDS - Activité Composants Distribution Service
Prism Electronics
Continental Prestige Electronics
$0.370
$0.324
$0.246
$0.193
Component Stockers USA
$0.440
$0.270
Kepictronics
Perfect Parts
Assy Fe
Authorized Procurement Solutions
Futuretech Components
GreenTree Electronics
Netroflash
$0.188
$0.182
$0.179
Non-linear Resistors MINISMDC160F-2 attributes and parameters. Explore more Non-linear Resistors devices from Littelfuse
JESD-609 Code:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Height (Package):
Length (Package):
Shape (Package):
Package Style (Meter):
Width (Package):
Packing Method:
Reference Standard:
Resistance:
Resistor Type:
Terminal Finish:
Terminal Placement:
Terminal Shape:
Thermistor Application:
Operating Voltage:
MINISMDC160F-2 Resistors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8533.40.80.70
SB
8533.40.00.80
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
2N2222A
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
08055C104KAT2A
KYOCERA AVX
08055C104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
1N4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Shanghai Lunsure Electronic Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Forward Voltage (VF): 1 V; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Config: SINGLE;
SMBJ18CA
World Products
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
BAV99
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Good-ark Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
M39029/56-351
Amphenol
CONNECTOR ACCESSORY; Minimum Operating Temperature: -65 Cel; Additional Features: STANDARD: MIL-DTL-38999; Contact Gender: FEMALE; MIL-Connector Accessory Name: CONTACT; Associated Military - Specifications: MIL-DTL-38999;
261
Deltrol Controls
Other Relays;
2N7002
Vishay Intertechnology
2N7002 by Vishay Intertechnology is a N-CHANNEL FET with 60V DS Breakdown Voltage, 0.115A Drain Current, and 7.5 ohm On Resistance. Ideal for SWITCHING applications due to its SINGLE configuration with BUILT-IN DIODE. Operates in ENHANCEMENT MODE, suitable for surface mount with GULL WING terminals.
LM2931AZ-5.0RPG
LM2931AZ-5.0RPG by Onsemi is a Fixed Positive Single Output LDO Regulator with 5V nominal output voltage and 0.1A max output current. It features a low dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature range from -40 to 125°C. The package style is cylindrical with matte tin terminal finish, ideal for various electronic devices needing precise voltage regulation.
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shenzhen Socay Electronics
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
Vishay Semiconductors
KSZ9031RNXIC
Micrel
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 48; Package Code: HVQCCN; Package Shape: SQUARE;
ASMD030F-2
Littelfuse
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .98 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; No. of Terminals: 2;
192-102DEW-A01
Fenwal Electronics
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1000 ohm; Maximum Operating Temperature: 70 Cel; Minimum Operating Temperature: 0 Cel; Shape (Package): DISK PACKAGE;
RXEF090
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Maximum Operating Temperature: 85 Cel; Width (Package): 3 mm; Rated AC Voltage (URac): 72 V; Packing Method: BULK;
RXEF110K-2
TE Connectivity
TE Connectivity's RXEF110K-2 is a PTC resettable fuse with 2.5W power dissipation and 72V rated AC voltage. Ideal for temperature sensing applications, it features radial terminal placement and disk package shape for through-hole mounting at max 85°C operating temperature.
TFPT0603L1001FV
Vishay Intertechnology TFPT0603L1001FV is a PTC thermistor with 1000 ohm resistance, 1% tolerance, and 0.075 W power dissipation. It is used for temperature compensation in applications requiring dual-ended terminals and surface mounting type.
MINISMDC050F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .15 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .62 mm; Packing Method: TR, EMBOSSED, 7 INCH;
B72580E0250K062
TDK
B72580E0250K062 by TDK is a varistor with 25V max RMS voltage and 31V operating voltage. It has a rated temperature of 150°C, metal oxide film technology, and can absorb up to 3.7J energy. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and high energy absorption capacity.
RF2628-000
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: 1.25 ohm; Rated Power Dissipation (P): .45 W; Maximum Operating Temperature: 85 Cel; Shape (Package): DISK PACKAGE;
B57164-K103-J
Siemens
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 10000 ohm; Maximum Operating Temperature: 125 Cel; Shape (Package): DISK PACKAGE; No. of Terminals: 2;
MF-SM030-2-99
Bourns MF-SM030-2-99 is a PTC resettable fuse with 60V URac, 1.7W P, and -40 to 85°C operating range. It offers overload protection in surface mount applications with dual-ended terminals in a rectangular package.
RF2623-000
TE Connectivity's RF2623-000 is a PTC resettable fuse with resistance of 0.38 ohm and rated power dissipation of 1.5W. It is used for temperature sensing applications, featuring radial terminal placement and disk package shape for through hole mounting.
V33ZA1P
V33ZA1P by Littelfuse is a varistor with 20V max circuit RMS voltage and 1.2J energy capacity. It operates b/w -55°C to 125°C, suitable for surge protection in electronic circuits. With radial terminal placement and metal oxide film technology, it offers reliable performance in through-hole mounting applications.
SMD075F/60-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .35 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR, EMBOSSED, 13 INCH; Length (Package): 7.98 mm;
2920L150DR-A
2920L150DR-A by Littelfuse is a PTC thermistor with resistance of 0.08 ohm, operating voltage of 33V, and max circuit DC voltage of 33V. It is used for overcurrent protection in various applications due to its dual-ended terminal placement and surface mounting type.
NTC0805J47K
TE Connectivity's NTC0805J47K is a 47000 ohm NTC thermistor with a thermal sensitivity index of 4100 K. It has a rated temperature range of -55 to 125 °C and is used for temperature sensing applications. This surface mount device comes in a rectangular package with dual-ended terminals, ideal for various electronic systems.
RUEF900
PTC RESETTABLE FUSE; Mounting Type: THROUGH HOLE MOUNT; Resistance: .02 ohm; Rated Power Dissipation (P): 4.2 W; Maximum Operating Temperature: 85 Cel; Terminal Shape: WIRE;
82537040
Wuerth Elektronik & Kg
Wurth Elektronik's 82537040 is a VARISTOR with 0.04J energy capacity, 4V RMS voltage, and 5.5V operating voltage. It has DUAL ENDED terminals in RECTANGULAR PACKAGE for surge protection applications at -40 to 85°C temperature range.
RF2567-000
TE Connectivity's RF2567-000 is a PTC resettable fuse with 1.17 ohm resistance and rated AC voltage of 72V. Ideal for temperature sensing applications, it has a max operating temperature of 85°C and min of -40°C. With radial terminal placement and disk package shape, it offers 0.77W power dissipation in bulk packing method.
SG200
Measurement Specialties
NTC THERMISTOR; Mounting Type: THROUGH HOLE MOUNT; Resistance: 5 ohm; Maximum Operating Temperature: 65 Cel; No. of Terminals: 2; Terminal Shape: WIRE;
ERTJ1VG103JA
Panasonic
Panasonic ERTJ1VG103JA is a 10000 ohm NTC thermistor with 5% tolerance. It has a thermal sensitivity index of 3435 K and operates b/w -40 to 125 °C. Ideal for temperature compensation applications due to its dual-ended terminal placement in a rectangular SMT package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
MINISMDC050F-2 by TE Connectivity is a PTC thermistor with 1 ohm resistance, operating voltage of 24V, and dual terminal placement. It is used for overload protection in various applications due to its compact rectangular package design and surface mounting type. Operating temperature ranges from -40°C to 85°C making it suitable for UL, CSA, TUV reference standards.
MINISMDC075F/24-2
TE Connectivity's MINISMDC075F/24-2 is a PTC resettable fuse with operating voltage of 24V. It features dual-ended terminals, rectangular SMT package, and temperature sensing application. With -40 to 85°C operating range, matte tin finish, and CSA/TUV/UL standards, it is ideal for surface mount installations.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .09 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; JESD-609 Code: e3;
MINISMDC020F-2
TE Connectivity's MINISMDC020F-2 is a PTC resettable fuse with 30V URac. It features dual terminal placement in a rectangular package for overload protection applications. With a max operating temperature of 85°C, it is designed for surface mounting with wraparound terminals.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .6 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Reference Standard: CSA; TUV; UL;
MINISMDC014F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 85 Cel; Terminal Placement: DUAL ENDED; Terminal Shape: WRAPAROUND;
TE Connectivity's MINISMDC014F-2 is a PTC resettable fuse with 2 terminals, rated for 60V AC. Its dual-ended terminal placement and rectangular package make it ideal for temperature sensing applications. With a max operating temperature of 85°C, it is designed for surface mounting in various electronic devices.
MINISMDC150F/24-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .04 ohm; Maximum Operating Temperature: 85 Cel; No. of Terminals: 2; Reference Standard: CSA; TUV; UL;
TE Connectivity's MINISMDC150F/24-2 is a PTC resettable fuse with resistance of 0.12 ohm and rated AC voltage of 24 V. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. With dimensions of 4.83mm x 3.41mm x 1.94mm, it operates b/w -40 to 85 °C and conforms to UL, CSA, TUV standards.
MINISMDC110F/24-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .06 ohm; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Height (Package): 1.46 mm;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Maximum Operating Temperature: 85 Cel; Shape (Package): RECTANGULAR PACKAGE; Packing Method: TR; Terminal Shape: WRAPAROUND;
MINISMDC075F/24-02
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Thermistor Application: TEMPERATURE SENSING; Packing Method: TR, EMBOSSED, 7 INCH;
TE Connectivity's MINISMDC075F/24-02 is a PTC resettable fuse with resistance of 0.29 ohm and operating voltage of 24V. It is used for temperature sensing applications, featuring dual-ended terminals in a rectangular package. With dimensions of 4.83mm x 3.41mm x 1.3mm, it operates b/w -40°C to 85°C and meets CSA, TUV, and UL standards.
MINISMDC075F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; Packing Method: TR; Terminal Shape: WRAPAROUND;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: .11 ohm; Maximum Operating Temperature: 85 Cel; JESD-609 Code: e3; No. of Terminals: 2;
MINISMDC075F/24
MINISMDC075F/24 by TE Connectivity is a PTC resettable fuse with a rated power dissipation of 0.8W. It features dual-ended terminal placement in a rectangular package, suitable for temperature sensing applications. With an operating temperature range from -40°C to 85°C, it is ideal for surface mounting methods.
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Rated Power Dissipation (P): .8 W; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn) - with Nickel (Ni) barrier; No. of Terminals: 2;
MINIASMDC014F-2
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 85 Cel; Package Style (Meter): SMT; Height (Package): .89 mm;
PTC RESETTABLE FUSE; Mounting Type: SURFACE MOUNT; Resistance: 1.5 ohm; Maximum Operating Temperature: 85 Cel; Height (Package): .89 mm; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved