Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 700 A; Terminal Shape: END CAP;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$9.940
Component Stockers USA
$99.990
Fuses LA30QS700-128 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Mounting Feature:
LA30QS700-128 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148
International Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
SS14
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
North American Philips Discrete Products Div
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
C1206C104K5RACTU
KEMET Corporation
KEMET C1206C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and wraparound terminals.
LM107H
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
FDC5614P
MSKSEMI SEMICONDUCTOR
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 2 W; Transistor Element Material: SILICON; Minimum DS Breakdown Voltage: 60 V;
Weitron Technology
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb);
Changzhou Starsea Electronics
SMBJ18CA
Alpha & Omega Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MIXER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Bkc Semiconductors
LM78L05ACMX/NOPB
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
Motorola
RECTIFIER DIODE; Surface Mount: YES; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; JESD-609 Code: e0;
FNQ-12
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 12 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
ATM15
Mersen S A
The Mersen S A ATM15 fuse is a 15A fast blow electric fuse with 600V AC/DC rated voltage and 100kA breaking capacity. It comes in midget size, 10mm x 38mm dimensions, suitable for inline mounting applications. Compliant with CSA and UL standards, it is commonly used for circuit protection in various industrial equipment.
LPJ-100SP
Eaton Corporation
Eaton Corporation's LPJ-100SP fuse, rated at 100A and 600V AC/DC, features a J class with time delay blow characteristic. With dimensions of 28.6mm x 66.7mm, it is suitable for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
36916300440
Littelfuse
Littelfuse 36916300440 fuse has a rated current of 6.3A and nominal joule integral of 160.74J, suitable for electric fuse circuit protection at 300V AC/DC. With a time lag blow characteristic and trip time of 20s, it is ideal for applications requiring reliable overcurrent protection in various industries.
LP-CC-2-8/10
Eaton LP-CC-2-8/10 fuse, rated 2.8A and 600V AC, features time delay blow characteristic for electric circuit protection. With a compact body size of 10x38.1mm and end cap terminal shape, it is suitable for inline mounting applications with high breaking capacity of 200kA at 300V DC.
KTK-R-1
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
FNQ-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Voltage: 600 V;
125LET
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 240 V; Rated DC Voltage: 150 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
BK/ATM-20
The Eaton Corporation BK/ATM-20 fuse is a 20A electric fuse with fast blow characteristic. It has dimensions of 10.92mm x 3.81mm x 8.81mm and rated voltage of 32V, suitable for inline mounting applications. With a rated breaking capacity of 1000A, it is UL standard compliant and operates b/w -40°C to 100°C, making it ideal for circuit protection in various electronic devices.
LKN-100
ELECTRIC FUSE;
35NHG000B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 250 V; Rated Current: 35 A; Terminal Shape: TAB/BLADE;
0697A5000-01
Bel Fuse
Bel Fuse 0697A5000-01 is a MICRO fuse with 5A rated current, 250V AC voltage, and 94J nominal joule integral. It has a time lag blow characteristic and matte tin terminal finish. Ideal for circuit protection in applications requiring electric fuses with through hole mounting features.
TCF70
The TCF70 by Cooper Industries is a 70A electric fuse with a rated AC voltage of 600V. It has a time delay blow characteristic and a minimum operating temperature of -10°C. The fuse has a body length/diameter of 76.45mm, a body width of 25.4 inch, and a body height of 32mm. It has a tin terminal finish and a rated breaking capacity of 300000A. The TCF70 is suitable for applications that require circuit protection in systems with a maximum operating temperature of 65°C and a rated DC voltage of 300V.
0437.500WR
Littelfuse 0437.500WR is a fast-blow electric fuse with 0.5A rated current and 63V rated voltage, suitable for circuit protection in various applications. With dimensions of 3.2mm x 1.63mm x 0.82mm, it has a trip time of 5s and nominal joule integral of 0.018J, meeting CSA, CUL, and UL standards.
LP-CC-1-1/8
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.125 A; Terminal Shape: END CAP;
FNQ-R-3-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 3.5 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
0468.500NR
Littelfuse 0468.500NR is a 1206 fuse with 0.5A rated current, 63V DC/AC voltage, and slow blow characteristic. It has a trip time of 0.0015s and dimensions of 3.18mm x 1.52mm x 0.58mm, suitable for electric circuit protection in various applications like consumer electronics and automotive systems.
FNQ-R-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 20 A; Terminal Shape: END CAP;
LPJ-125SP
Eaton Corporation's LPJ-125SP fuse, rated at 125A and 600V AC/DC, features a J class with time delay blow characteristic. Measuring 41.4mm x 76.2mm, it offers circuit protection with a breaking capacity of 300kA. Ideal for inline mounting applications, compliant with CE, CSA, and UL standards.
0451002.MRL
Littelfuse 0451002.MRL Nano fuse with 2A current, 125V rated voltage, and 0.53J joule integral. Ideal for circuit protection in electronics due to very fast blow characteristic and surface mounting feature. Compliant with CE, CSA, CUL, PSE, TUV, UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LA30QS2500-128
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 2500 A; Terminal Shape: END CAP;
LA30QS150-4TI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE;
LA30QS1200-128
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 1200 A; Terminal Shape: END CAP;
LA30QS200-4TI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE;
LA30QS175-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 175 A; Terminal Shape: TAB/BLADE;
LA30QS1500-128IL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 1500 A; Terminal Shape: END CAP;
LA30QS2500-128IL
LA30QS1000-128IL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 1000 A; Terminal Shape: TAB/BLADE;
LA30QS1600-128
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 1600 A; Terminal Shape: END CAP;
LA30QS125-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
LA30QS200-4
LA30QS2000-128
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 2000 A; Terminal Shape: END CAP;
LA30QS1500-128
LA30QS225-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 225 A; Terminal Shape: TAB/BLADE;
LA30QS100-4TI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
LA30QS150-4
LA30QS1000-128
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 1000 A; Terminal Shape: END CAP;
LA30QS100-4
LA30QS130-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 300 V; Rated Current: 130 A; Terminal Shape: TAB/BLADE;
LA30QS2000-128IL
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved