Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 130 A; Terminal Shape: TAB/BLADE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
AZTECH Wire
1+ parts
$22.080
100+ parts
1k+ parts
10k+ parts
Fuses LA15QS130-4 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Mounting Feature:
LA15QS130-4 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Rectron
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
1N4148WS
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Onsemi
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SMBJ18CA
STMicroelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 6 ohm; Minimum DS Breakdown Voltage: 50 V; Operating Mode: ENHANCEMENT MODE;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
General Instrument
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
DS18B20+
Analog Devices
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
LM358DT
ROHM
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR;
STM32F103C8T6
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
Sanken Electric
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; JESD-30 Code: R-PDIP-T18; Package Body Material: PLASTIC/EPOXY;
Changzhou Starsea Electronics
BAV99
Allegro MicroSystems
RECTIFIER DIODE; Terminal Position: END; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32F405RGT6
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM555CMX
Texas Instruments
LM555CMX by Texas Instruments is an Analog Waveform Generation IC with 8 terminals. It operates at a nominal voltage of 5V and supports power supplies ranging from 5V to 15V. This versatile IC, housed in a small outline package, is commonly used for pulse and rectangular waveform generation in commercial temperature environments.
CM32FC
Eaton Corporation
ELECTRIC FUSE;
0157002.DRT
Littelfuse
Littelfuse 0157002.DRT NANO fuse with 8.2J joule integral, 125V AC voltage, and 0.1s trip time. Ideal for circuit protection in electronics with WRAPAROUND terminals and TIME LAG blow characteristic. Rated at 2A current, it offers a compact size of 6.1mm x 2.69mm x 2.69mm for surface mount applications.
FWX-40A
The Eaton Corporation FWX-40A fuse, with 40 A rated current and 200000 A breaking capacity, is ideal for electric circuit protection at 250 V AC/DC. Featuring a compact body of 20.57mm x 40.39mm, it has TAB/BLADE terminals and meets CE, CSA, and UL standards for various applications in inline or holder mounting configurations.
DMM-B-11A
Cooper Industries
DMM-B-11A by Cooper Industries is a 10mm x 38.1mm fuse with a rated current of 11A and a blow characteristic of fast. It is used for circuit protection in applications requiring a rated AC voltage of 1000V and a rated DC voltage of 1000V, with a rated breaking capacity of 20000A at 1000VDC.
0313.600HXP
The Littelfuse 0313.600HXP is a 3AG fuse with a rated current of 0.6 A and a max operating temperature of 125°C. It has a time lag blow characteristic and is commonly used for circuit protection in applications such as inline holders.
ANN-500
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE;
BK/ATC-5
BK/ATC-5 by Eaton Corp is a 32V, 5A fast blow electric fuse with 1000A breaking capacity. Measuring 19.3mm x 5.25mm x 12.5mm, it has tab/blade terminals and UL certification. Ideal for inline mounting in circuits requiring quick 0.1s trip time at -40 to 100°C temperatures.
0251001.MXL
Littelfuse 0251001.MXL PICO fuse, rated 125V, 1A with 0.256J joule integral. Very fast blow characteristic in a compact size of 2.8mm x 7.11mm for supplemental circuit protection applications. Operating temperature range -55 to 125 °C, suitable for electric fuse requirements in various industries.
SS-5-4A-AP
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: PIN WIRE; Reference Standard: CSA; CQC; METI; SEMKO; UL; VDE;
ATDR1-4/10
Mersen S A
ATDR1-4/10 by Mersen S A is a 1.4A time delay electric fuse with 600V AC and 300V DC ratings. It features an end cap terminal shape, inline mounting, and a compact size of 10.4mm x 38.1mm. Ideal for circuit protection in various applications meeting CSA and UL standards.
0ATO07.5V
Littelfuse 0ATO07.5V fuse with 7.5A rated current, 60J nominal joule integral, and 0.1s trip time is ideal for electric circuit protection. With a rated breaking capacity of 1000A and operating temperatures from -40°C to 125°C, it suits various applications requiring inline mounting in CSA/UL compliant systems.
032601.5MXP
Littelfuse 032601.5MXP fuse, rated 1.5A at 250V, offers time delay blow characteristic with trip time of 5s. Ideal for circuit protection in applications requiring a nominal joule integral of 59.7J and rated breaking capacity of 100A.
KLDR015.TXP
KLDR015.TXP by Littelfuse is a 15A time delay electric fuse with 200.5J nominal joule integral and 600V AC/300V DC rated voltage. It features nickel terminal finish, CSA/UL reference standards, and is commonly used for inline circuit protection applications.
FNQ-R-5-6/10
Eaton Corporation's FNQ-R-5-6/10 fuse, rated at 5.6A and 600V, features a time delay blow characteristic for electric circuit protection. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is suitable for inline mounting applications meeting CSA and UL standards.
FNQ-R-25
Eaton Corporation's FNQ-R-25 fuse, rated at 25A and 600V, features a time delay blow characteristic. With a compact body size of 10.3mm x 38.1mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 200kA. The fuse is designed with nickel terminal finish and meets CE, CSA, and UL standards for reliable performance.
CC12H2A-TR
CC12H2A-TR fuse by Eaton Corp. is a 1206 size with 2A current rating and 63V DC voltage. With trip time of 0.1s, it offers circuit protection with a breaking capacity of 50A. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and compact dimensions of 3.2mm x 1.6mm x 0.6mm.
KTK-R-1/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .1 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
LP-CC-1-1/2
LP-CC-1-1/2 by Eaton Corp is a 1.5A time delay electric fuse with 600V AC and 300V DC ratings. Measuring 10x38.1mm, it features an end cap terminal shape and inline mounting, suitable for circuit protection in various applications meeting CE, CSA, UL standards.
ANL-250
ANL-250 by Eaton Corp is a 250A time delay electric fuse with 2700A breaking capacity. Measuring 81mm x 22.2mm, it features an end cap terminal shape and inline mounting for circuit protection in applications requiring up to 80V DC voltage. CSA and UL standards compliant with built-in indicator feature.
KTK-R-2
The Eaton Corporation's KTK-R-2 fuse, rated at 2A and 600V, features a fast blow characteristic with a body size of 10.3mm x 38.1mm. Designed for circuit protection, it has a rated breaking capacity of 200kA and is suitable for inline/holder mounting in various applications compliant with CE, CSA, and UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LA15QS1000-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 1000 A; Terminal Shape: TAB/BLADE;
LA15QS1000-4TI
LA15QS1000-4IL
LA15QS1000-128
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 1000 A; Terminal Shape: END CAP;
LA15QS1-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 1 A; Terminal Shape: END CAP;
LA15QS150-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 150 A; Terminal Shape: TAB/BLADE;
LA15QS150-4TI
LA15QS1200-128
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 1200 A; Terminal Shape: END CAP;
LA15QS15-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 15 A; Terminal Shape: END CAP;
LA15QS1200-128IL
LA15QS12-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 12 A; Terminal Shape: END CAP;
LA15QS1500-128IL
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 1500 A; Terminal Shape: END CAP;
LA15QS10-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 10 A; Terminal Shape: END CAP;
LA15QS150-4IL
LA15QS100-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 150 V; Rated DC Voltage: 150 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
LA15QS1000-128IL
LA15QS130-4TI
LA15QS100-4TI
LA15QS1500-128
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved