Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 350 A; Terminal Shape: END CAP; Reference Standard: UL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
AZTECH Wire
$11.340
Fuses LA120URD70TTI0350 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Body Width:
Dimensions:
Blow Characteristic:
Built-in Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Mounting Feature:
LA120URD70TTI0350 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Obsolescence/ EOL - Mult Dev obs 19/Apr/2023
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM317LMX/NOPB
National Semiconductor
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Seated Height: 1.75 mm; Nominal Dropout Voltage-1: 3 V;
SS14
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; Maximum Non Repetitive Peak Forward Current: 30 A; Maximum Forward Voltage (VF): .55 V; No. of Phases: 1;
Continental Device India
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
1N4148
New Jersey Semiconductor Products
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LL4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
CRG0805F10R
Tyco Electronics Components
FIXED RESISTOR; Mounting Type: SURFACE MOUNT; Resistance: 10 ohm; Rated Power Dissipation (P): .125 W; Maximum Operating Temperature: 125 Cel; Tolerance: 1 %;
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
MBRS140T3G
Onsemi
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
Synsemi
LM358D-T
NXP Semiconductors
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
1N4148WS
Dc Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
North American Philips Discrete Products Div
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Operating Mode: ENHANCEMENT MODE; Maximum Drain Current (ID): .115 A;
M24308/2-1F
Amphenol
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Body or Shell Style: RECEPTACLE; Body Length: 1.228 inch; No. of Rows Loaded: 2;
Sangdest Microelectronics (Nanjing)
PIC18F4550T-I/PT
The Microchip Technology PIC18F4550T-I/PT microcontroller operates at a max clock frequency of 48 MHz with 8-bit architecture. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it suitable for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this device offers efficient performance in compact designs.
LP-CC-1-6/10
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.6 A; Terminal Shape: END CAP;
0451005.MRL
Littelfuse
Littelfuse 0451005.MRL Nano fuse with 5A current rating, 125V AC/DC voltage, and 5.566J joule integral. Ideal for circuit protection in electronics, featuring very fast blow characteristic and surface mounting feature. Compliant with CE, CSA, CUL, PSE, TUV, UL standards.
031302.5MXP
031302.5MXP by Littelfuse is a 2.5A, 250V time lag fuse with a rated breaking capacity of 100A. It has a nominal joule integral of 199J and trip time of 5s, suitable for electric fuse circuit protection applications. This fuse features nickel terminal finish, CE/CSA/KC/PSE/UL standards compliance, and operates within -60 to 125°C temperature range.
0215.315MXP
0215.315MXP fuse by Littelfuse is a 5x20mm electric fuse with 0.315A rated current and 250V rated voltage, suitable for circuit protection in various applications. It has a time lag blow characteristic, trip time of 0.005s, and nominal joule integral of 0.975J. Ideal for inline mounting, it meets CE, IEC, UL standards with nickel terminal finish.
0685T4000-01
Bel Fuse
Bel Fuse 0685T4000-01 is a 1206 size fuse with 4A rated current and 63V DC voltage. It has a slow blow characteristic, trip time of 0.002s, and rated breaking capacity of 50A. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and surface mounting feature.
0217002.HXP
0217002.HXP fuse by Littelfuse is a 5x20mm electric fuse with a rated current of 2A and a max operating temperature of 125°C. It has a very fast blow characteristic and is commonly used for circuit protection in applications such as CCC, CE, CSA, IEC, KC, PSE, SEMKO, SEV, UL, and VDE standards.
AGC-1-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
0218002.MXP
Littelfuse 0218002.MXP fuse, rated 2A and 250V, features a time lag blow characteristic with trip time of 0.02s. With dimensions of 5x20mm, it offers circuit protection in applications requiring a max operating temperature of 125°C. Compliant with CCC, CE, CSA, KC, PSE, SEMKO, SEV, UL and VDE standards.
FNQ-R-5-6/10
Eaton Corporation
Eaton Corporation's FNQ-R-5-6/10 fuse, rated at 5.6A and 600V, features a time delay blow characteristic for electric circuit protection. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is suitable for inline mounting applications meeting CSA and UL standards.
0216002.MXP
Littelfuse 0216002.MXP fuse, rated at 2A and 250V, offers fast blow characteristic with trip time of 0.02s. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
LP-CC-10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 10 A; Terminal Shape: END CAP;
0273.500H
Littelfuse 0273.500H is a MICRO fuse with 0.5A rated current, 125V AC/DC voltage, and very fast blow characteristic. It has a trip delay of 14400s and nominal joule integral of 0.0716J. Ideal for circuit protection in applications requiring high breaking capacity and through-hole mounting.
LPJ-400SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
0468002.NRHF
Littelfuse 0468002.NRHF fuse, rated 2A and 63V, with 0.506J nominal joule integral. Ideal for circuit protection in electronics due to time delay blow characteristic and compact 1206 size. Features WRAPAROUND terminals and matte tin finish for surface mount applications.
AGC-3-R
AGC-3-R fuse by Eaton Corp is a 3A, 250V electric fuse with fast blow characteristic. With dimensions of 6.35x31.75mm and rated breaking capacity of 100A, it's ideal for inline circuit protection applications. Compliant with CSA and UL standards, it operates b/w -55 to 125°C temperatures efficiently in various electrical systems.
028707.5.PXCN
Littelfuse 028707.5.PXCN fuse with 7.5A rated current, 60J nominal joule integral, and 1000A rated breaking capacity. Ideal for electric circuit protection in applications requiring a fuse with dimensions of 19.1mm x 5.1mm x 12.3mm and operating temperatures from -40°C to 105°C.
FWP-600A
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 600 A; Terminal Shape: TAB/BLADE;
LP-CC-12
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 12 A; Terminal Shape: END CAP;
3405.0166.24
Schurter Ag
The Schurter Ag 3405.0166.24 fuse is a 1A electric fuse with very fast blow characteristic, rated for 250V AC and 125V DC. It has a nominal joule integral of 0.4J and dimensions of 10.1mm x 3mm x 3.75mm, suitable for surface mount applications in circuit protection systems at temperatures ranging from -55°C to 125°C.
LP-CC-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.2 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LA120X25-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated DC Voltage: 1000 V; Rated Current: 25 A; Terminal Shape: END CAP;
LA120URD72TTI0800
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 800 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100000 A;
LA120URD71LLI0550
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 550 A; Terminal Shape: TAB/BLADE; Nominal Joule Integral: 84 J;
LA120X20-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated DC Voltage: 1000 V; Rated Current: 20 A; Terminal Shape: END CAP;
LA120X10-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated DC Voltage: 1000 V; Rated Current: 10 A; Terminal Shape: END CAP;
LA120URD72LI0630
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 630 A; Terminal Shape: TAB/BLADE; Manufacturer Series: LA;
LA120X30-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated DC Voltage: 1000 V; Rated Current: 30 A; Terminal Shape: END CAP;
LA120URD70LI0350
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 350 A; Terminal Shape: TAB/BLADE; Built-in Features: INDICATOR;
LA120URD73LI0800
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 800 A; Terminal Shape: TAB/BLADE; Body Width: 74.5 inch;
LA120URD71TTI0500
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 500 A; Terminal Shape: END CAP; Blow Characteristic: VERY FAST;
LA120X15-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated DC Voltage: 1000 V; Rated Current: 15 A; Terminal Shape: END CAP;
LA120X1-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated DC Voltage: 1000 V; Rated Current: 1 A; Terminal Shape: END CAP;
LA120URD71TTI0630
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 630 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100000 A;
LA120X2-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated DC Voltage: 1000 V; Rated Current: 2 A; Terminal Shape: END CAP;
LA120URD71LLI0500
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 51 mm;
LA120URD72TTI0700
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 700 A; Terminal Shape: END CAP; Built-in Features: INDICATOR;
LA120A1/2-1
ELECTRIC FUSE; Rated Current: .5 A; Terminal Shape: END CAP; Rated Voltage: 1200 V; Dimensions: 20.6mm x 117mm; Body Height: 117 mm;
LA120URD71TTI0550
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated Current: 550 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100000 A;
LA120X1/2-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1200 V; Rated DC Voltage: 1000 V; Rated Current: .5 A; Terminal Shape: END CAP;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved