Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse CCMR005.TXP fuse, rated 5A with 600V AC/300V DC, offers time delay blow characteristic and 1060J nominal joule integral. Commonly used for electric circuit protection in various applications due to its compact size (10.3mm x 38.1mm) and high breaking capacity of 200kA.
Median Price
$33.745
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Arrow
1+ parts
$28.159
100+ parts
$19.403
1k+ parts
$16.790
10k+ parts
-
RS Americas
$30.520
RS (Exports)
$32.210
Mouser Electronics
$35.280
$21.970
$19.700
DigiKey
$37.610
$21.967
$18.122
Newark
$38.220
$22.320
$18.420
Standard Electric Supply Co.
Verical
$45.510
Master Electronics
$21.150
$17.590
Chip1Stop
Nova Conductors
$18.193
Electro Sonic
$22.210
$17.520
$16.780
TME
$34.130
IBS Electronics
$23.114
$21.632
Vyrian
ACDS - Activité Composants Distribution Service
PUI
Corohmni
$12.553
Semicontronic
$13.680
$13.338
$13.270
Netroflash
$17.283
$16.919
CoreStaff
$19.892
Aztec Data Supply Inc.
$20.840
Continental Prestige Electronics
$20.980
$14.980
Allen Electronics Distributors
$30.710
Argo Parts USA
Authorized Procurement Solutions
Perfect Parts
Higher joule rating means better protection against power surges, making this fuse a reliable choice for electrical circuits.
Suitable for handling high voltage applications, providing safety and reliability in electrical systems.
Compact size allows for easy installation in tight spaces, making it a versatile option for various setups.
Ideal for protecting circuits with a maximum current flow of 5 A, ensuring efficient and safe operation.
Time delay feature provides protection against temporary overloads without sacrificing the ability to handle inrush currents, enhancing overall performance.
Inline or holder mounting options offer flexibility in installation, allowing for easy maintenance and replacement of the fuse.
Fuses CCMR005.TXP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Additional Features:
Nominal Joule Integral:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
CCMR005.TXP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
PCN Packaging - Bar Code Update 26/May/2017 Mult Devices 28/Feb/2019
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
BAV99
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Terry Semiconductor
RECTIFIER DIODE; Surface Mount: NO; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; JESD-609 Code: e0; Maximum Repetitive Peak Reverse Voltage: 100 V;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
KSZ9031RNXIC
Microchip Technology
KSZ9031RNXIC by Microchip Technology is a network interface chip with 1 transceiver. It operates at a data rate of 1000 Mbps and has a nominal voltage of 1.2V. This chip is commonly used in industrial applications requiring Ethernet connectivity.
AT90CAN128-16AU
AT90CAN128-16AU by Microchip Technology is a microcontroller with 8-bit data RAM and 16-bit address bus width. It operates at a max clock frequency of 16 MHz, making it suitable for industrial applications requiring low power mode and connectivity options like CAN, SPI, and USART. With 53 I/O lines and 8-channel 10-bit ADCs, this microcontroller offers versatile peripheral support for various embedded systems.
1N4148WS
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753BIT6
STMicroelectronics
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
SMBJ18CA
Good-ark Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Maximum Time At Peak Reflow Temperature (s): 10; JESD-609 Code: e3;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BSS138-7-F
Diodes Incorporated
Diodes Inc. BSS138-7-F is a N-channel FET with 50V DS breakdown voltage, 0.2A max drain current, and 3.5 ohm RDS(on). Ideal for switching applications in small outline packages with matte tin finish, operating up to 150°C peak reflow temp.
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
261
New England Microwave
Other Interface ICs; No. of Terminals: 14; Package Equivalence Code: FL14(UNSPEC); Power Supplies (V): +-5,-15; Package Body Material: PLASTIC/EPOXY; Surface Mount: YES;
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
STM32H750VBT6
STM32H750VBT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, offering 20 timers and 16 DMA channels. It features 2 DAC and 16 ADC channels, suitable for industrial applications requiring high-speed processing up to 48 MHz. With extensive connectivity options like FDCAN, Ethernet, and USB, it provides versatile solutions in a compact package.
Deltrol Controls
Other Relays;
170M2619
Eaton Corporation
The Eaton Corporation 170M2619 fuse has a rated current of 315A and a rated breaking capacity of 200kA, suitable for electric fuse circuit protection at 700V AC. With dimensions of 54mm x 30mm x 51mm, it features TAB/BLADE terminals and built-in INDICATOR, meeting CE, CSA, DIN, IEC, and UL standards.
80ET
80ET fuse by Eaton Corporation is a 80A electric fuse with a rated AC voltage of 690V and rated breaking capacity of 200kA. With dimensions of 48mm x 19.1mm, it is suitable for inline mounting applications in compliance with standards BS88 and CE.
BK/ABC-2-R
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 2 A; Terminal Shape: END CAP;
FWP-50A22F
FWP-50A22F by Eaton Corporation is a 50 A electric fuse with a rated breaking capacity of 200000 A. It has a nominal joule integral of 155 J and can handle AC voltages up to 700 V. This fuse, measuring 22.2mm x 58mm, is commonly used for circuit protection in various applications.
PTS120615V050
Eaton Corporation's PTS120615V050 fuse, with a trip time of 0.1s and rated voltage of 15V, is ideal for circuit protection in electronics. Featuring a fast blow characteristic and rated current of 0.5A, it ensures reliable performance in a compact 1206 size package suitable for surface mount applications. Compliant with TUV and UL standards, this electric fuse offers a high breaking capacity of 100A for safeguarding against overcurrent situations.
SP/LPJ-100SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
0468.500NR
Littelfuse
Littelfuse 0468.500NR is a 1206 fuse with 0.5A rated current, 63V DC/AC voltage, and slow blow characteristic. It has a trip time of 0.0015s and dimensions of 3.18mm x 1.52mm x 0.58mm, suitable for electric circuit protection in various applications like consumer electronics and automotive systems.
JTD125ID
JTD125ID fuse by Littelfuse is a time delay electric fuse with 125A rated current and 600V AC/500V DC voltage. It has a compact body size of 41.3mm x 76.2mm, suitable for inline mounting applications. With a high breaking capacity of 200kA, it is ideal for circuit protection in various industrial settings.
KTK-R-2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 10.3mm x 38.1mm;
FNQ-R-25
Eaton Corporation's FNQ-R-25 fuse, rated at 25A and 600V, features a time delay blow characteristic. With a compact body size of 10.3mm x 38.1mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 200kA. The fuse is designed with nickel terminal finish and meets CE, CSA, and UL standards for reliable performance.
0697A5000-01
Bel Fuse
Bel Fuse 0697A5000-01 is a MICRO fuse with 5A rated current, 250V AC voltage, and 94J nominal joule integral. It has a time lag blow characteristic and matte tin terminal finish. Ideal for circuit protection in applications requiring electric fuses with through hole mounting features.
56000001009
Littelfuse 56000001009 fuse, TR5 size, rated 250V AC/DC. Ideal for circuit protection in electronics. Through-hole mounting, UL and VDE standards compliant, operating temp -40 to 85°C.
ATDR3-1/2
Mersen S A
ATDR3-1/2 by Mersen S A is a 3.5A time delay fuse with 600V AC and 300V DC ratings. Featuring a blow characteristic of TIME DELAY, it offers circuit protection with a high breaking capacity of 200kA. Ideal for inline mounting, it complies with CSA and UL standards for various electrical applications.
BK-MDL-2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
AJT200/400
AJT200/400 by Mersen S A is a J-class fuse with 200A rated current and 600V AC/DC voltage. Featuring time lag blow characteristic, it offers 200000A breaking capacity. Ideal for electric circuit protection in various applications compliant with IEC and UL standards.
BK/ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
FNQ-R-4-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 4.5 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
LPJ-40SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 40 A; Terminal Shape: END CAP;
0297015WXNV
Littelfuse 0297015WXNV fuse with 270J joule integral, 15A rated current, and 32V DC voltage. Ideal for electric circuit protection in applications requiring inline mounting, such as automotive and industrial electronics. Operating temperatures range from -40°C to 125°C.
BK/ATM-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 30 A; Terminal Shape: TAB/BLADE; Additional Features: RATED BREAKING CAPACITY AT 32 VDC: 1000 A;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
CCMR020.TXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 500 V; Rated Current: 20 A; Terminal Shape: END CAP;
CCMR002.TXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2 A; Terminal Shape: END CAP;
CCMR001.TXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1 A; Terminal Shape: END CAP;
CCMR004.TXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 4 A; Terminal Shape: END CAP;
CCMR.800TXP
CCMR.800TXP by Littelfuse is a time delay electric fuse with a rated current of 0.8 A and a rated AC voltage of 600 V. It has a compact body size of 10.3mm x 38.1mm and is commonly used for circuit protection in various applications such as inline or holder mounting systems.
CCMR030.TXP
Littelfuse CCMR030.TXP fuse has 30A rated current, 600V AC/DC voltage, and 1790J nominal joule integral. It is a time delay electric fuse with 200kA breaking capacity, suitable for inline mounting applications in CE/CSA/UL certified circuits.
CCMR050.T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 250 V; Rated Current: 50 A; Terminal Shape: END CAP;
CCMR2.25TXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.25 A; Terminal Shape: END CAP;
CCMR03.5TXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 3.5 A; Terminal Shape: END CAP;
CCMR010.TXP
Littelfuse CCMR010.TXP fuse, rated 10A and 600V, with a time delay blow characteristic. Offers high protection with 1250J nominal joule integral and 200kA breaking capacity. Ideal for electric circuit protection in various applications due to CE, CSA, UL certifications.
CCMR01.5TXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
CCMR015.TXP
Littelfuse CCMR015.TXP fuse has 1120J nominal joule integral, 600V AC/DC rated voltage, and 15A current rating. It is a time-delay electric fuse with nickel terminal finish, suitable for inline mounting applications in CE, CSA, and UL certified systems.
CCMR040.T
Littelfuse CCMR040.T fuse, rated 40A and 600V AC/DC, features time delay blow characteristic. With a compact body size of 21.6mm x 47.8mm, it is ideal for inline mounting in electric circuits with a high breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, suitable for various industrial applications.
CCMR005
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 5 A; Terminal Shape: END CAP;
CCMR005.HXP
CCMR003
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 3 A; Terminal Shape: END CAP;
CCMR005.T
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP;
CCMR003.HXP
CCMR001.HXP
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved