Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: 2-WIRE INTERFACE; Response Time: 1000 us; Body Height: 6.35 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.512
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$0.563
$0.497
Robosynatics
$2.517
$2.331
Lucentia Tech
Proximity Sensors 59150-1-T-05-F attributes and parameters. Explore more Proximity Sensors devices from Littelfuse
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Package Shape or Style:
Response Time:
Sensors or Transducers Type:
Termination Type:
PCN Assembly/Origin - Sensor Plant Transfer 21/Jul/2015
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
AT90CAN128-16AUR
Microchip Technology
AT90CAN128-16AUR by Microchip: 16 MHz clock, 8-bit data RAM, and 131072 ROM words. Ideal for industrial applications with CAN, SPI, TWI connectivity and low power mode. Contains 4 timers, 8 ADC channels, and supports up to 10-bit analog to digital conversion.
LM317T
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; JESD-30 Code: R-PSFM-T3; Adjustability: ADJUSTABLE; Package Equivalence Code: SIP3,.1TB;
CRCW04020000Z0ED
Vishay Intertechnology
Vishay Intertechnology's CRCW04020000Z0ED is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating b/w -55 to 155 °C, it suits SMT applications in automotive electronics due to AEC-Q200 compliance and 0.063 W power dissipation.
2N7002
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
1N4148
Sun Wai Electronic
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Reverse Recovery Time: .004 us; Maximum Repetitive Peak Reverse Voltage: 100 V;
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
C0603C104K5RACTU
KEMET Corporation
KEMET C0603C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LM7805CT
Integrated Circuit Technology
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Position: SINGLE; Operating Temperature (TJ-Min): 0 Cel;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Comchip Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; Operating Mode: ENHANCEMENT MODE;
M24308/2-1F
Defense Logistics Agency
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Type: CABLE AND PANEL; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; Empty Shell: NO;
SPC TECHNOLOGY/ MULTICOMP
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
OPA2227UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
NE555DR
Texas Instruments
NE555DR by Texas Instruments is an Analog Waveform Generation IC with 8 terminals, operating voltage of 5V, and power supplies ranging from 5-15V. It is a versatile component for pulse generation applications due to its small outline package and commercial temperature grade suitability.
1N4148WS
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
STMicroelectronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; No. of Elements: 8; Minimum DC Current Gain (hFE): 1000;
55110-3H-05-A
Littelfuse
PROXIMITY SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 24 V; Body Height: 10 mm;
55110-3H-01-D
PROXIMITY SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Body Height: 10 mm; Body Width: 14 inch;
CA30CLN25CPM6
Carlo Gavazzi Holding Ag
PROXIMITY SENSOR,CAPACITIVE;
TTR490APSB5D-2.0FL-CTR
Hans Turck & Kg
PROXIMITY SENSOR,PHOTOELECTRIC;
MAX25405EQP/VY+T
Maxim Integrated
UNAM18P1703
Baumer Electric Ag
Baumer Electric Ag's UNAM18P1703 is a 30V ultrasonic proximity sensor with 89mm height and 18mm diameter. It operates b/w -10 to 60°C, outputting analog current up to 200mA via a 3-wire interface. Ideal for applications requiring precise distance measurement within the range of 100-700mm.
BI5-EM18-VP4X-H1141
BI5-EM18-VP4X-H1141 by Hans Turck & KG is an inductive proximity sensor with PNP output. It operates b/w -25°C to 70°C, with a supply voltage range of 10V to 65V. Featuring stainless steel housing and flush mounting, it's ideal for industrial automation applications.
E2B-S08LS01-WP-C12M
Omron
Proximity Sensors;
XS7D1A1PBL2
Schneider Electric Sa
PROXIMITY SENSOR,INDUCTIVE;
59065-3-S-03-A
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Body Length/Diameter: 8 mm; Maximum Operating Temperature: 105 Cel; Maximum Operating Current: 250 mA; Body Height: 38.1 mm;
59135-1-V-02-A
Littelfuse 59135-1-V-02-A is a magnetic proximity sensor with body dimensions of 28.57x19.05x6.35 mm, suitable for applications requiring a temperature range of -40 to 150°C. It has a max operating current of 500mA and features cable termination with flange mounting capability.
MK04-1A66D-500W
Meder Electronic Ag
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: PANEL MOUNT; Package Shape or Style: RECTANGULAR; Housing: PBT GLASS FIBRE REINFORCED; Minimum Operating Temperature: -30 Cel; Maximum Operating Current: 1250 mA;
55100-3L-05-C
PROXIMITY SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 5.2 mA; Output Interface Type: 3-WIRE INTERFACE;
MK04-1A66B-2000W
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: PANEL MOUNT; Package Shape or Style: RECTANGULAR; Housing: PBT; Body Length/Diameter: 23 mm; Output Interface Type: 1-WIRE INTERFACE;
E51SAL
Eaton Corporation
25100
BI1.5U-EG08-AN6X
BI1.5U-EG08-AN6X by Hans Turck & KG is an inductive proximity sensor with a 30V max supply voltage and NPN output type. With stainless steel housing, it operates b/w -30 to 85 °C, making it ideal for flush mounting applications requiring precise detection in industrial settings.
BI15U-MT30-AP6X-H1141
BI15U-MT30-AP6X-H1141 by Hans Turck & KG is an inductive proximity sensor with PNP output, 10-30V supply voltage range, and -30 to 85°C operating temperature. Ideal for flush mounting applications, this metal-housed sensor has a barrel shape, 62mm height, and 30mm diameter.
EX-Z13FA-P
Panasonic
The Panasonic EX-Z13FA-P is a 3-inch proximity sensor with PNP output type, suitable for board mount applications. It operates b/w -10°C to 55°C, with a response time of 500 us and a max measurement range of 500 mm. With a supply voltage range from 10.8 V to 26.4 V, it offers precise detection in various industrial settings.
59060-1-U-01-F
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Body Height: 36 mm; Output Interface Type: 2-WIRE INTERFACE; Minimum Operating Temperature: -40 Cel; Termination Type: CABLE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
59150-010
Littelfuse 59150-010 is a rectangular proximity sensor with dimensions of 28.57mm x 19.05in x 6.35mm, operating b/w -40°C to 105°C. It features cable termination and flange mounting, suitable for various industrial automation applications requiring photoelectric proximity sensing capabilities.
59150-1-S-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Height: 6.35 mm; Minimum Operating Temperature: -40 Cel; Body Length/Diameter: 28.57 mm;
Hamlin Electronics Europe
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Response Time: 1000 us; Maximum Operating Temperature: 105 Cel; Termination Type: CABLE;
59150-1-U-05-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Response Time: 1000 us; Body Height: 6.35 mm; Termination Type: WIRE;
59150-1-U-02-E
59150-1-S-05-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Response Time: 1000 us; Minimum Operating Temperature: -40 Cel; Body Height: 6.35 mm;
59150-1-S-05-F
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 105 Cel; Body Length/Diameter: 28.57 mm; Termination Type: CABLE;
59150-1-U-05-F
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 28.57 mm; Termination Type: CABLE; Maximum Operating Temperature: 105 Cel;
59150-1-T-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 28.57 mm; Maximum Supply Voltage: 200 V; Response Time: 1000 us;
59150-1-T-02-E
59150-1-T-02-F
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: CABLE; Body Length/Diameter: 28.57 mm; Response Time: 1000 us;
59150-1-U-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: WIRE; Maximum Operating Temperature: 105 Cel; Body Length/Diameter: 28.57 mm;
59150-1-S-02-F
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: 2-WIRE INTERFACE; Response Time: 1000 us; Minimum Operating Temperature: -40 Cel;
59150-1-U-02-F
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Response Time: 1000 us; Termination Type: CABLE; Body Length/Diameter: 28.57 mm;
59150-040
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 19.05 inch; Maximum Operating Temperature: 105 Cel; Body Height: 6.35 mm;
59150-020
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 19.05 inch; Minimum Operating Temperature: -20 Cel; Maximum Operating Temperature: 105 Cel;
59150-1-T-05-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Additional Features: IP 67; Body Width: 9.53 inch; Body Length/Diameter: 28.57 mm;
59150-030
Littelfuse 59150-030 is a rectangular proximity sensor with dimensions of 28.57mm x 19.05in x 6.35mm, suitable for flange mounting. It operates b/w -40°C to 105°C and features cable termination, making it ideal for various industrial applications requiring photoelectric sensors.
59150-1-S-02-E
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Height: 6.35 mm; Response Time: 1000 us; Body Length/Diameter: 28.57 mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved