Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 105 Cel; Minimum Operating Temperature: -40 Cel; Body Width: 19.05 inch;
Median Price
$3.830
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
DigiKey
1+ parts
100+ parts
$2.510
1k+ parts
$2.011
10k+ parts
$1.947
Native Components
$0.334
-
$0.320
Northwest PG Solutions
$0.367
$0.324
Proximity Sensors 59145-1-S-02-F attributes and parameters. Explore more Proximity Sensors devices from Littelfuse
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Interface Type:
Package Shape or Style:
Response Time:
Sensors or Transducers Type:
Termination Type:
PCN Assembly/Origin - Sensor Plant Transfer 21/Jul/2015
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148WS
Promax-johnton
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
BSS138BKW,115
NXP Semiconductors
NXP Semiconductors' BSS138BKW,115 is a N-CHANNEL FET with 60V DS breakdown voltage and 0.32A ID. Ideal for SWITCHING applications, it features a built-in diode, 1.6 ohm RDS(on), and operates in ENHANCEMENT MODE. Suitable for surface mount with GULL WING terminals, it meets AEC-Q101 standards.
LL4148
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM358AN
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N4148
Continental Device India
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Bkc Semiconductors
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
SS14
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
LM317BD2TG
LM317BD2TG by Onsemi is an adjustable positive single output standard regulator with a max output current of 1.5A and a max load regulation of 5.8%. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact designs.
L78L05ABZ-AP
STMicroelectronics
L78L05ABZ-AP by STMicroelectronics is a BIPOLAR fixed positive single output standard regulator with an operating temperature range of -40 to 125°C. It has a nominal output voltage of 5V, max load regulation of 0.06%, and can handle a max output current of 0.07A. Ideal for applications requiring stable voltage regulation in various electronic devices.
LM555CN
Texas Instruments
LM555CN by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V. It operates b/w 0°C to 70°C, making it suitable for commercial applications. This rectangular package IC has dual terminals and uses bipolar technology for pulse generation in various electronic circuits.
Lite-on Technology
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel; Maximum Output Current: .1 A; Maximum Reverse Recovery Time: .006 us;
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
H1622-014
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Additional Features: TTL COMPATIBLE; Housing: STAINLESS STEEL; Body Length/Diameter: 1 mm;
1634250
Hans Turck & Kg
PROXIMITY SENSOR,INDUCTIVE;
TDE0160FPT
STMicroelectronics TDE0160FPT is a proximity sensor with 4-36V supply voltage range, 10us response time, and 40mA output. Ideal for inductive sensing applications, it operates b/w -25 °C to 85°C temperatures and features a compact rectangular package for surface mount installation.
H1522-014
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Maximum Measurement Range (mm): 1.52 mm; Minimum Measurement Range (mm): .12 mm; Body Length/Diameter: 1 mm;
MK17-B-2
Standex-meder Electronics
MK17-B-2 by Standex-Meder Electronics is a 2.1" proximity sensor with a response time of 100 us. Ideal for surface mount applications, it operates b/w -40°C to 130°C temperatures. Featuring epoxy resin housing, this rectangular sensor is perfect for photoelectric sensing needs.
E2B-S08KS02-MC-B1
Omron
Proximity Sensors;
59065-1-V-02-A
Littelfuse
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Minimum Operating Temperature: -40 Cel; Response Time: 1000 us; Termination Type: CABLE; Maximum Operating Temperature: 105 Cel;
BH1772GLC-E2
ROHM
ROHM's BH1772GLC-E2 is a proximity sensor with 3.6V max supply voltage, 85°C max operating temp, and 100mm max measurement range. Ideal for surface mount applications, it features digital voltage output via I2C interface for precise distance sensing in various devices.
TMD26721
Ams Ag
TMD26721 by Ams Ag is a proximity sensor with 2.36" width, 1.35mm height, and 3.94mm length/diameter. It operates b/w -30 to 85°C with a supply voltage range of 2.6V to 3.6V, outputting digital voltage via a 2-wire interface. Ideal for surface mount applications requiring precise proximity sensing capabilities.
H1512-009
PROXIMITY SENSOR,HALL EFFECT; Output Type: ANALOG CURRENT; Package Shape or Style: ROUND; Body Height: 1.5 mm; Housing: STAINLESS STEEL; Minimum Measurement Range (mm): .12 mm;
BI6U-M12-IOL6X2-H1141
BI6U-M12-IOL6X2-H1141 by Hans Turck & KG is an inductive proximity sensor with NPN and PNP output types. It operates b/w -25°C to 70°C, with a max supply voltage of 30V and current of 150mA. Ideal for applications requiring flush mounting, this sensor has a metal housing and barrel shape, making it suitable for industrial automation systems.
MK24-B-3-OE
Meder Electronic Ag
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 130 Cel; Minimum Operating Temperature: -40 Cel; Termination Type: SOLDER;
59135-3-S-05-A
Littelfuse 59135-3-S-05-A is a rectangular magnetic proximity sensor with dimensions of 28.57mm x 19.05in x 3.43mm. It operates b/w -40°C to 150°C, has a response time of 3000us, and can handle a max current of 250mA. Ideal for applications requiring flange mounting and a two-wire interface termination type.
9212661054
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: RECTANGULAR; Housing: POLYESTER; Body Length/Diameter: 28.5 mm; Body Width: 19 inch; Termination Type: WIRE;
59070-3-V-04-C
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Body Length/Diameter: 8 mm; Maximum Operating Temperature: 105 Cel; Output Interface Type: 2-WIRE INTERFACE; Body Height: 38.1 mm;
MK17-B-1
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: SURFACE MOUNT; Package Shape or Style: RECTANGULAR; Housing: EPOXY RESIN; Body Width: 2.1 inch; Minimum Operating Temperature: -40 Cel;
BI2-M12-AP6X-H1141
STM8T143AU62TTR
STM8T143AU62TTR by STMicroelectronics is a capacitive proximity sensor with 2.3V to 5.5V supply voltage range and digital output interface. It operates b/w -40 °C to 85°C, has response time of 60,000µs, and consumes only 0.075mA max current. Ideal for surface mount applications requiring accurate proximity detection in compact spaces.
59070-3-S-04-C
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Body Length/Diameter: 8 mm; Output Interface Type: 2-WIRE INTERFACE; Minimum Operating Temperature: -40 Cel; Maximum Operating Temperature: 105 Cel;
59065-1-T-03-A
PROXIMITY SENSOR,PHOTOELECTRIC; Package Shape or Style: CYLINDRICAL; Maximum Operating Current: 500 mA; Response Time: 1000 us; Minimum Operating Temperature: -40 Cel; Body Height: 38.1 mm;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
59140-1-S-02-A
Littelfuse 59140-1-S-02-A is a magnetic proximity sensor with max supply voltage of 200V, response time of 1000us, and operating temp range from -40°C to 105°C. Ideal for applications requiring precise detection in industrial automation systems.
59145-4-S-02-A
Littelfuse 59145-4-S-02-A is a rectangular proximity sensor with dimensions 28.57mm x 19.05in x 6.35mm. It operates b/w -40°C to 105°C, has a response time of 3000us, and uses a 2-wire interface. Ideal for applications requiring precise object detection in industrial settings.
Hamlin Electronics Europe
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Height: 6.35 mm; Body Width: 19.05 inch; Termination Type: CABLE;
59145-010
Littelfuse 59145-010 is a rectangular proximity sensor with dimensions 28.57mm x 19.05in x 6.35mm, operating b/w -40°C to 105°C. It features cable termination and flange mounting, suitable for various photoelectric sensing applications.
59145-1-T-02-A
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Termination Type: CABLE; Maximum Operating Temperature: 105 Cel; Body Length/Diameter: 28.57 mm;
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Output Interface Type: 2-WIRE INTERFACE; Minimum Operating Temperature: -40 Cel; Body Height: 6.35 mm;
59140-1-S-05-A
Littelfuse 59140-1-S-05-A is a magnetic proximity sensor with max supply voltage of 200V, response time of 1000us, and operating temp range from -40°C to 105°C. It is used for proximity sensing applications requiring precise detection in industrial settings.
59145-1-S-02-A
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 28.57 mm; Maximum Operating Temperature: 105 Cel; Response Time: 1000 us;
Littelfuse 59145-1-S-02-A is a rectangular proximity sensor with dimensions of 28.57mm x 19.05in x 6.35mm, operating b/w -40°C to 105°C. It features a response time of 1000us and uses a 2-wire interface for applications requiring precise object detection in industrial settings.
59145-040
59140-1-T-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Supply Voltage: 200 V; Additional Features: IP 67; Body Height: 6 mm;
59140-2-U-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Response Time: 1000 us; Maximum Operating Current: .4 mA; Housing: PBT;
59140-2-V-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 105 Cel; Body Length/Diameter: 23 mm; Minimum Operating Temperature: -20 Cel;
59140-1-V-03-A
PROXIMITY SENSOR,PHOTOELECTRIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 23.01 mm; Minimum Operating Temperature: -40 Cel; Body Height: 5.99 mm;
59140-2-V-05-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Additional Features: IP 67; Maximum Supply Voltage: 300 V; Response Time: 1000 us;
59140-3-S-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Height: 6 mm; Additional Features: IP 67; Minimum Operating Temperature: -40 Cel;
59140-1-T-05-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Response Time: 1000 us; Maximum Operating Current: .5 mA; Minimum Operating Temperature: -40 Cel;
59140-1-V-05-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Maximum Operating Current: .5 mA; Body Length/Diameter: 23 mm; Body Width: 7.5 inch;
59140-3-S-05-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -40 Cel; Body Width: 7.5 inch; Response Time: 3000 us;
59140-3-T-02-A
PROXIMITY SENSOR,MAGNETIC; Mounting Feature: FLANGE MOUNT; Package Shape or Style: RECTANGULAR; Body Width: 7.5 inch; Body Height: 6 mm; Termination Type: WIRE;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved