Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Maximum Operating Current: 17 mA;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Northwest PG Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
Magnetic Field Sensors 55140-2H-03-D attributes and parameters. Explore more Magnetic Field Sensors devices from Littelfuse
Body Width:
Body Height:
Body Length/Diameter:
Mounting Feature:
No. of Terminals:
Maximum Operating Current:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Circuit Type:
Output Interface Type:
Output Type:
Package Body Material:
Package Equivalence Code:
Package Shape or Style:
Power Supplies (V):
Sensors or Transducers Type:
Sub-Category:
Maximum Supply Voltage:
Minimum Supply Voltage:
Technology:
Termination Type:
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Rfe International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Bytesonic Electronics
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS84-7-F
Diodes Incorporated
Diodes Inc. BSS84-7-F is a P-channel FET with 50V DS breakdown voltage, 0.13A max drain current, and 10 ohm RDS(on). Ideal for switching applications, it features a single configuration with built-in diode in a small outline package. Operating in enhancement mode at up to 150°C, it has Gull Wing terminals and matte tin finish.
2N2222A
Itt Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
LM358D-T
LM358D-T by NXP Semiconductors is a dual operational amplifier with 70dB CMRR, 1000kHz unity gain bandwidth, and 9000uV max input offset voltage. Widely used in commercial applications due to its small outline package and low bias current of 0.5uA.
Onsemi
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
Panjit International
LFXTAL025159REEL
Iqd Frequency Products
LFXTAL025159REEL by IQD Frequency Products is a 32.768 kHz crystal oscillator with 20 ppm frequency tolerance and 40,000 ohm series resistance. It is ideal for applications requiring precise timekeeping, such as real-time clocks in IoT devices or microcontrollers in wearables. The surface-mount design with a drive level of 1 uW makes it suitable for compact electronic systems.
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Bharat Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
SZNUP2105LT1G
SZNUP2105LT1G by Onsemi is a Transient Suppression Device with 2 elements in a common anode configuration. It has a max non-repetitive peak reverse power dissipation of 350W and breakdown voltage of 29.1V. Ideal for applications requiring bidirectional polarity protection, such as automotive electronics and industrial equipment due to its AEC-Q101 compliance and high clamping voltage of 44V.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
TDK
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); No. of Phases: 1; No. of Elements: 1; Maximum Output Current: .2 A;
Zetex Plc
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
DRV5023AJQLPGMQ1
Texas Instruments
DRV5023AJQLPGMQ1 by Texas Instruments is a magnetic field sensor with hysteresis of 3.7 mT, operating temperature range from -40 to 125°C, and output current up to 30 A. Ideal for automotive applications due to AEC-Q100 screening level, it features a digital current output via open-drain interface in a rectangular package style.
TLV49611TBXALA1
Infineon Technologies
TLV49611TBXALA1 by Infineon: 26V max supply, -40 to 125°C temp range, 0-25mA output. Ideal for magnetic field sensing in automotive and industrial applications.
MRMS201A-001
Murata Manufacturing
MRMS201A-001 by Murata is a MAGNETIC FIELD SENSOR with 1.6-3.5V supply, -40 to 85°C temp range, and 0.5-2.5 mT field range. It has VOLTAGE OUTPUT suitable for surface mount applications in various industries like automotive and consumer electronics.
TLE4935LHALA1
TLE4935LHALA1 by Infineon is a magnetic field sensor with 24V max supply voltage, 40mT hysteresis, and -40 to 150°C operating temp. Ideal for applications requiring digital current output in a compact rectangular package.
OHS3150U
Optek Technology
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG VOLTAGE; Package Shape or Style: SQUARE; Output Range: 2.10-2.90V;
DRV5055A1QLPGM
DRV5055A1QLPGM by Texas Instruments is a magnetic field sensor with a supply voltage range of 3V to 3.63V and operating temperatures from -40°C to 125°C. It features an output range of -1-1mA, making it suitable for applications requiring precise analog current measurements in various industries such as automotive, industrial automation, and consumer electronics. With a compact rectangular design measuring 4mm x 5.05mm x 1.52 inches, this sensor offers high sensitivity and accuracy for detecting magnetic fields in challenging environments.
US1881LUA-AAA-000-BU
Melexis N V
Melexis N V's US1881LUA-AAA-000-BU is a magnetic field sensor with 24V max supply voltage, 12.5mT hysteresis, and -40 to 150°C operating temp range. Ideal for applications requiring precise magnetic field detection in compact spaces.
OHS3020U
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: THROUGH HOLE MOUNT; No. of Terminals: 3; Output Type: ANALOG CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 25mA;
TLE49452LXA
TLE49452LXA by Infineon is a Hall effect magnetic field sensor with 3.8V to 24V supply voltage range, 5mT hysteresis, and 8mA max operating current. It is used for digital current output applications in various industries due to its rectangular package style and through-hole mounting feature.
ACS724LMATR-65AB-T
Allegro MicroSystems
ACS724LMATR-65AB-T by Allegro MicroSystems is a magnetic field sensor with voltage output. It operates b/w -40 to 150°C, with supply voltage range of 4.5-5.5V and max current of 14mA. Ideal for automotive applications due to AEC-Q100 screening level and Hall effect technology.
MLX90215LVA-AAA-111-BU
Melexis N V's MLX90215LVA-AAA-111-BU is a magnetic field sensor with 4.5-5.5V supply voltage range, -40 to 150°C operating temperature, and -2-2mA current output. Ideal for applications requiring precise magnetic field detection like automotive sensors and industrial automation systems.
TLE4998P4
TLE4998P4 by Infineon is a magnetic field sensor with 5V supply, 0.005 mT hysteresis, and 0.10% linearity. It is used for Hall effect sensing in applications requiring precise magnetic field measurements. The sensor has a single-ended analog current output and operates b/w -40 to 150°C temperature range.
TLE493DW2B6A1HTSA1
TLE493DW2B6A1HTSA1 by Infineon is a magnetic field sensor with 2.8-3.5V supply, -40 to 125°C temp range, and 160-230mT magnetic field detection. It utilizes Hall effect technology for digital voltage output via I2C interface, ideal for surface mount applications in various industries.
A1302KLHLX-T
Allegro MicroSystems' A1302KLHLX-T is a magnetic field sensor with 3 terminals, offering a sensitivity of 1.3 mV/G and linearity of 2.5%. Operating b/w -40 to 125 °C, it outputs digital voltage in the range of 0.25-4.65V, making it ideal for applications requiring precise magnetic field detection.
SS461A
Honeywell Sensing And Control
SS461A by Honeywell is a magnetic field sensor with 3mT hysteresis, 30V max supply voltage, and 1.57" body width. It's used for detecting magnetic fields in applications requiring a -55 to 160°C operating temperature range, such as automotive sensors or industrial controls. The sensor outputs an analog voltage signal through a latched bipolar input mode with through-hole mounting feature.
55100-3H-03-A
Hamlin Electronics Europe
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Range: 10mA; Minimum Operating Temperature: -40 Cel;
S-5716ANSL3-M3T1U
Seiko Instruments Usa
MAGNETIC FIELD SENSOR,HALL EFFECT;
TLV49611TAXBXA1
TLV49611TAXBXA1 by Infineon is a magnetic field sensor with 3-26V supply voltage range, 4mT hysteresis, and 0-25mA current output. Ideal for applications requiring -40 to 125°C operating temperature, such as automotive systems and industrial automation due to its Hall effect technology and compact rectangular package design.
BU52097GWZ-E2
ROHM
ROHM's BU52097GWZ-E2 is a magnetic field sensor with 4 terminals, digital output, and hysteresis of 0.9 mT. Operating b/w -40 to 85°C, it has a max supply voltage of 3.6V and min of 1.65V. Ideal for applications requiring precise magnetic field detection in compact spaces due to its small square package shape and surface mounting feature.
PDRV5033AJQDBZT
PDRV5033AJQDBZT by Texas Instruments is a Hall effect magnetic field sensor with a supply voltage range of 2.5V to 38V and hysteresis of 3.4mT. It operates in temperatures from -40°C to 125°C, making it suitable for various applications requiring precise digital voltage output within a magnetic field range of 1mT to 12mT.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
55140-3H-03-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 20mA; Maximum Supply Voltage: 24 V;
Littelfuse
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 3; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 20mA;
55140-3H-02-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL VOLTAGE; Package Shape or Style: RECTANGULAR; Output Range: 20mA; Termination Type: CABLE;
Littelfuse 55140-3H-02-A is a Hall effect magnetic field sensor with voltage output. It operates b/w -40 to 100°C, with supply voltage range of 2.7V to 24V and max current of 2.4mA. Ideal for applications requiring precise magnetic field detection in various industries.
55140-2H-02-F
55140-2H-04-E
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Body Width: 14 inch;
55140-2H-05-C
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Minimum Supply Voltage: 3.75 V;
55140-2H-05-D
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Interface Type: 2-WIRE INTERFACE;
55140-2H-01-C
55140-2H-02-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Termination Type: CABLE;
55140-2H-03-C
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Package Body Material: METAL;
55140-2H-04-D
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Maximum Operating Temperature: 100 Cel;
55140-2H-02-E
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Body Length/Diameter: 23 mm;
55140-2H-05-A
55140-2H-01-E
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Technology: CMOS;
55140-2H-02-C
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; No. of Terminals: 2; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Power Supplies (V): 3.8/24;
55140-2H-03-E
55140-2H-04-A
55140-2H-03-A
MAGNETIC FIELD SENSOR,HALL EFFECT; Mounting Feature: FLANGE MOUNT; Output Type: DIGITAL CURRENT; Package Shape or Style: RECTANGULAR; Output Circuit Type: SINGLE-ENDED; Package Body Material: METAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved