Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 65 V; Rated DC Voltage: 65 V; Rated Current: 1.25 A; Terminal Shape: PIN WIRE;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
$14.570
AZTECH Wire
$15.600
Northwest PG Solutions
$16.027
$14.424
Advanced Electronics
$107.865
$98.157
$88.449
Fuses 39811250000 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Body Diameter:
Body Height:
Body Width:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
39811250000 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
DS18B20U+
Analog Devices
DS18B20U+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
Jgd Semiconductors
RECTIFIER DIODE; Surface Mount: YES; Maximum Reverse Recovery Time: .006 us; Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Forward Voltage (VF): 1 V; Maximum Operating Temperature: 150 Cel;
1N4148
General Diode
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Terminal Finish: Tin/Lead (Sn/Pb); No. of Elements: 1;
2N2222A
New Jersey Semiconductor Products
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Package Shape: ROUND;
FSMLF327
Fox Electronics
FSMLF327 by Fox Electronics is a crystal oscillator with 20 ppm frequency tolerance, 144% stability, and 50000 ohm series resistance. Ideal for applications requiring precise timing such as communication systems, industrial automation, and consumer electronics. Operating temperature range from -40 to 85 °C.
SMBJ18CA
Semtech
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM7805CT
Fairchild Semiconductor
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
MBR130T1G
Onsemi
MBR130T1G by Onsemi is a Schottky rectifier diode with max output current of 1A and max repetitive peak reverse voltage of 30V. It operates b/w -65 to 125°C, suitable for surface mount applications in electronics requiring low forward voltage drop.
ULN-2803A
Vishay Sprague
Vishay Sprague's ULN-2803A is an 8-bit peripheral driver with a max supply voltage of 3V. Featuring open-collector output characteristics, it offers built-in transient protections and operates b/w -20°C to 85°C. Ideal for applications requiring sink current flow direction, this rectangular-shaped driver has a terminal pitch of 2.54mm and turn-on/off time of 1us.
RC0603FR-0710KL
Yageo
Yageo's RC0603FR-0710KL is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in electronics requiring precise resistance values.
M39029/58360
Souriau
CONNECTOR ACCESSORY; Associated Military - Specifications: MIL-DTL-38999; Tool Settings: M22520/2-09; Terminal Type: CRIMP; MIL Conformity: YES; Mating Contacts: M39029/56348;
LM107H
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Minimum Voltage Gain: 25000;
1N4148WT
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M39029/58-360
Amphenol
CONNECTOR ACCESSORY; MIL Conformity: YES; Associated Military - Specifications: MIL-DTL-38999; Contact Gender: MALE; Terminal Type: CRIMP; IEC Conformity: NO;
DS18B20+
DS18B20+ by Analog Devices is a 12-bit temperature sensor with 3.3/5V supply, -55 to 125°C range, and ±0.50°C accuracy. It features a 1-Wire interface for digital output and is commonly used in applications requiring precise temperature monitoring in various industries.
Tak Cheong Electronics Holdings
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Transys Electronics
Weitron Technology
RECTIFIER DIODE; Surface Mount: YES; Maximum Operating Temperature: 150 Cel; Maximum Output Current: .215 A; JESD-609 Code: e0; Maximum Forward Voltage (VF): .715 V;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BK/ATM-30
Eaton Corporation
The Eaton Corporation BK/ATM-30 fuse is a 30A electric fuse with fast blow characteristic, rated for 32V DC voltage. With dimensions of 10.92mm x 3.81mm x 8.81mm, it has a rated breaking capacity of 1000A and operates b/w -40°C to 100°C. Ideal for inline mounting in circuit protection applications, meeting UL standards.
LP-CC-3
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 3 A; Terminal Shape: END CAP;
LP-CC-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.2 A; Terminal Shape: END CAP;
0453003MR
Littelfuse
Littelfuse 0453003MR NANO fuse with 3A current rating, 125V AC/DC voltage, and 1.65J joule integral. Ideal for circuit protection in electronics, featuring very fast blow characteristic and surface mounting feature.
PTS120616V025
Eaton Corporation's PTS120616V025 fuse, with 16V rated voltage and 0.25A current, offers fast blow characteristic in a 1206 size. Ideal for circuit protection, it has a trip time of 0.08s and operates b/w -40 to 85°C temperatures. Suitable for surface mount applications with TUV and UL standards compliance.
ATDR4-1/2
Mersen S A
Mersen S A's ATDR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 200kA breaking capacity, it is ideal for electric circuit protection in various applications requiring inline mounting or holder setup. Compliant with CSA and UL standards, its compact size of 10.4mm x 38.1mm makes it versatile for different electrical systems.
BK/MDL-1-R
Cooper Electronic Technologies
BK/MDL-1-R by Cooper Electronic Technologies is a 1A electric fuse with 250V AC voltage rating and 11.498J nominal joule integral. Featuring time delay blow characteristic, it has a rated breaking capacity of 35A. Ideal for inline mounting, this fuse is commonly used in circuit protection applications.
ATDR1
The Mersen S A ATDR1 fuse is a 1A, 600V time-delay electric fuse with a rated breaking capacity of 200kA. Measuring 10.4mm x 38.1mm, it features an end cap terminal shape and is suitable for inline/holder mounting applications in circuits requiring protection against overcurrents.
0451002.MRL
Littelfuse 0451002.MRL Nano fuse with 2A current, 125V rated voltage, and 0.53J joule integral. Ideal for circuit protection in electronics due to very fast blow characteristic and surface mounting feature. Compliant with CE, CSA, CUL, PSE, TUV, UL standards.
FNQ-3-1/2
Eaton Corporation's FNQ-3-1/2 fuse, rated 3.5A and 500V, features a time delay blow characteristic for electric circuit protection. With a compact size of 10.41mm x 38.1mm, it is ideal for inline mounting applications requiring a high breaking capacity of 10000A. Compliant with CE, CSA, and UL standards, it is commonly used in MIDGET fuse class circuits for industrial equipment protection.
3403.0169.24
Schurter Ag
3403.0169.24 fuse by Schurter Ag is a 2A, 250V electric fuse with a time lag blow characteristic and rated breaking capacity of 200A. Measuring at 10.1mm x 3mm x 3mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 10ms.
ATDR10
The Mersen S A ATDR10 fuse is a 10A, time delay electric fuse with 600V AC and 300V DC ratings. Featuring a body size of 10.4mm x 38.1mm, it has an END CAP terminal shape and inline mounting feature. Ideal for circuit protection in various applications requiring a high breaking capacity of 200kA.
0437.500WR
Littelfuse 0437.500WR is a fast-blow electric fuse with 0.5A rated current and 63V rated voltage, suitable for circuit protection in various applications. With dimensions of 3.2mm x 1.63mm x 0.82mm, it has a trip time of 5s and nominal joule integral of 0.018J, meeting CSA, CUL, and UL standards.
0218001.MXP
Littelfuse 0218001.MXP fuse has a rated current of 1A and trip time of 0.02s, suitable for circuit protection in applications with 250V AC voltage. With a blow characteristic of TIME LAG, it offers a pre arcing rating of 6.73 A2/s and is compatible with various reference standards like CCC, CE, CSA, UL.
3413.0114.22
Schurter Ag's 3413.0114.22 fuse is a 1206 size with 0.75A rated current and 32V AC voltage, suitable for electric circuit protection in various applications. With a very fast blow characteristic and gold nickel terminal finish, it offers high reliability with a rated breaking capacity of 50A and pre arcing rating of 0.05 A2/s.
AMG-100
The Eaton Corporation's AMG-100 fuse, with dimensions of 29.2mm x 15.4mm x 9mm, is rated for 100A current and 48V DC voltage. It features TAB/BLADE terminals and UL standard compliance, making it ideal for electric circuit protection in various applications.
0297030.WXNV
Littelfuse 0297030.WXNV is a MINI fuse with 30A rated current, 1230J nominal joule integral, and 0.03s trip time. Ideal for electric circuit protection in automotive applications due to its compact size (10.9mm x 3.8mm x 8.8mm) and high breaking capacity of 1000A at rated voltage of 32V.
0466001.NRHF
0466001.NRHF by Littelfuse is a 1206 size fuse with 63V rated voltage and 1A current. It offers fast blow characteristic, 0.0423J joule integral, and 0.2s trip time. Ideal for circuit protection in electronics with surface mounting feature.
KTK-3
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 3 A; Terminal Shape: END CAP;
DFJ-250
DFJ-250 by Eaton Corp is a 250A fast blow electric fuse with 600V AC and 450V DC ratings. Measuring 53.59mm x 85.85mm, it features TAB/BLADE terminals and inline/holder mounting for high breaking capacity of 200kA. Ideal for circuit protection in various applications meeting CSA and UL standards.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
3981100000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 65 V; Rated DC Voltage: 65 V; Rated Current: 1 A; Terminal Shape: PIN WIRE;
39811000000
3981125000
3981160000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 65 V; Rated DC Voltage: 65 V; Rated Current: 1.6 A; Terminal Shape: PIN WIRE;
39811600000
3981200000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 65 V; Rated DC Voltage: 65 V; Rated Current: 2 A; Terminal Shape: PIN WIRE;
39812000000
3981250000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 65 V; Rated DC Voltage: 65 V; Rated Current: 2.5 A; Terminal Shape: PIN WIRE;
39812500000
3981315000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 65 V; Rated DC Voltage: 65 V; Rated Current: 3.15 A; Terminal Shape: PIN WIRE;
39813150000
3981400000
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 65 V; Rated DC Voltage: 65 V; Rated Current: 4 A; Terminal Shape: PIN WIRE;
39814000000
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved