Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Maximum Operating Temperature: 85 Cel;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$14.535
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$15.988
$14.390
Fuses 37200500075 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
37200500075 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
1N4148
Shandong Yiguang Electronic Joint Stock
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
BAV99
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Weitronic Enterprise
FDN5618P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Moisture Sensitivity Level (MSL): 1;
2N7002
Secos
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .3 W; Maximum Drain Current (ID): .115 A; Maximum Drain-Source On Resistance: 7.5 ohm;
SMBJ18CA
Zowie Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS3203C
Idec
ROTARY SWITCH;
C0603X104K5RACAUTO
KEMET Corporation
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
FDD5614P
FDD5614P by Onsemi is a P-CHANNEL Power FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features 45A IDM and 0.1 ohm RDS(ON), operating in ENHANCEMENT MODE at up to 175°C. The PLASTIC/EPOXY package with GULL WING terminals ensures efficient heat dissipation and reliable performance.
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
MMBF170LT1G
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM317T
Texas Instruments
LM317T by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. With a max output current of 1.5A, this through-hole package regulator is ideal for power supply designs where adjustable voltage levels are needed.
1N4148WT
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
2N2222A
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
FNQ-R-1-1/4
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
ANN-500
Cooper Industries
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 500 A; Terminal Shape: TAB/BLADE;
021802.5MXP
Littelfuse
021802.5MXP fuse by Littelfuse is a 2.5A electric fuse with a rated AC voltage of 250V and trip time of 0.02s, suitable for circuit protection applications. With a blow characteristic of time lag and rated breaking capacity of 35A, it operates within a temperature range of -55°C to 125°C. This compact fuse, sized at 5x20mm, features nickel terminal finish and is compliant with various international standards like CCC, CE, UL, and VDE.
TCF70
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
04653.15DR
Littelfuse 04653.15DR is a NANO fuse with 3.15A rated current, 32.4J nominal joule integral, and 0.01s trip time. It is used for circuit protection in applications requiring a time lag blow characteristic at up to 250V AC voltage, such as CE-certified electronics with surface mounting feature.
0215.315MXP
0215.315MXP fuse by Littelfuse is a 5x20mm electric fuse with 0.315A rated current and 250V rated voltage, suitable for circuit protection in various applications. It has a time lag blow characteristic, trip time of 0.005s, and nominal joule integral of 0.975J. Ideal for inline mounting, it meets CE, IEC, UL standards with nickel terminal finish.
0326.800MXP
Littelfuse 0326.800MXP is a 3AB fuse with rated current of 0.8A and rated voltage of 250V, suitable for circuit protection in various applications. It has a trip time of 5s, nominal joule integral of 8.2J, and blow characteristic as time delay, making it ideal for use in electric systems requiring reliable overcurrent protection. The fuse's dimensions are 6.35mm x 31.75mm with a body height of 31.75mm, meeting CE, CSA, and UL standards for quality assurance.
ATM30
Mersen S A
Mersen S A's ATM30 fuse, rated 30A and 600V, features fast blow characteristic with 100kA breaking capacity. It is a midget size fuse with end cap terminal shape, suitable for electric circuit protection in inline/holder mounting applications.
SP/LPJ-125SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
FNQ-R-5-6/10
Eaton Corporation
Eaton Corporation's FNQ-R-5-6/10 fuse, rated at 5.6A and 600V, features a time delay blow characteristic for electric circuit protection. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is suitable for inline mounting applications meeting CSA and UL standards.
0451002.MRL
Littelfuse 0451002.MRL Nano fuse with 2A current, 125V rated voltage, and 0.53J joule integral. Ideal for circuit protection in electronics due to very fast blow characteristic and surface mounting feature. Compliant with CE, CSA, CUL, PSE, TUV, UL standards.
0215020.MXP
0215020.MXP by Littelfuse is a 20 A fuse with 2600 J nominal joule integral and 0.01s trip time. Ideal for circuit protection in applications requiring a 250 V rated AC/DC voltage, such as inline mounting in electronic devices.
AGC-2-R
AGC-2-R by Eaton Corp is a 2A electric fuse with 250V AC voltage rating and 17.52J nominal joule integral. It has a fast blow characteristic, rated breaking capacity of 100A, and operates b/w -55°C to 125°C. Commonly used for circuit protection in inline/holder mounting applications.
0287010.PXCN
Littelfuse 0287010.PXCN fuse has a rated current of 10A, trip time of 0.08s, and nominal joule integral of 115J. It is used for circuit protection in applications requiring a max operating temperature of 125°C and rated DC voltage of 32V.
FWP-400A
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
TCF70 by Eaton Corporation is a 70A electric fuse with a rated AC voltage of 600V. It has a time delay blow characteristic and can operate in temperatures ranging from -40°C to 80°C. This fuse, with its inline mounting feature and indicator, is commonly used for circuit protection in various applications.
KTK-15
The Eaton Corporation's KTK-15 fuse is rated for 600V AC with a fast blow characteristic and 15A current. It has a body length of 10.3mm and diameter of 38.1mm, suitable for inline mounting applications requiring electric circuit protection up to 100000A breaking capacity. Compliant with CSA and UL standards, it is ideal for various industrial uses.
0213.500MXP
0213.500MXP fuse by Littelfuse is a 5x20mm electric fuse with a rated current of 0.5A and trip time of 0.02s, suitable for circuit protection in applications requiring a 250V AC voltage rating. With a blow characteristic of time lag and pre-arcing rating of 2.905 A2/s, it offers reliable protection against overcurrent conditions at temperatures ranging from -55°C to 125°C.
0216001.MXP
Littelfuse 0216001.MXP fuse, rated at 1A and 250V, offers fast blow characteristic with trip time of 0.02s. Ideal for circuit protection in applications requiring a compact 5x20mm size fuse with nickel terminal finish. Operating temperature range from -55 to 125°C ensures reliable performance in various environments.
KTK-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Packing Method: BOX;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
37200630431
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Trip Time/Delay: .02 Seconds;
37200800001
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: PIN WIRE; Maximum Operating Temperature: 85 Cel;
37208000411
Littelfuse 37208000411 fuse has a rated current of 0.8A and trip time of 0.02s, suitable for electric circuit protection. With a rated voltage of 250V and blow characteristic as TIME LAG, it offers reliable performance in applications requiring a max operating temperature of 85°C. The fuse size is TR5 with dimensions of 8.5mm x 8mm, making it ideal for use in various electronic devices.
37205000431
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .5 A; Terminal Shape: PIN WIRE; Reference Standard: CCC; CE; CUL; KC; UL; VDE;
37202000001
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .2 A; Terminal Shape: PIN WIRE; Minimum Operating Temperature: -40 Cel;
37200500001
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Body Height: 8 mm;
37200500411
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Terminal Finish: MATTE TIN;
37200500431
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Reference Standard: CCC; CE; CUL; KC; UL; VDE;
37200630411
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .063 A; Terminal Shape: PIN WIRE; Nominal Joule Integral: .0278 J;
37200800411
The Littelfuse 37200800411 is a TR5 fuse with a rated current of 0.08 A and a rated voltage of 250 V. It has a trip time of 0.02 seconds and is suitable for circuit protection in applications requiring an electric fuse.
37200400001
Littelfuse 37200400001 fuse has a rated current of 0.04A and trip time of 0.02s, suitable for circuit protection in applications requiring a 250V AC voltage rating. With dimensions of 8.5mm x 8mm, it features a time lag blow characteristic and matte tin terminal finish for reliable performance at temperatures ranging from -40°C to 85°C.
37200800431
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .08 A; Terminal Shape: PIN WIRE; Pre Arcing Rating (A2/s): 0.023;
37205000001
Littelfuse 37205000001 fuse, TR5 size with 0.5A rated current and 250V AC voltage. Features time lag blow characteristic for circuit protection in applications requiring a 2J nominal joule integral. Operating temperature range from -40 to 85°C makes it suitable for various electronic devices.
37208000431
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .8 A; Terminal Shape: PIN WIRE; JESD-609 Code: e3;
37206300411
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .63 A; Terminal Shape: PIN WIRE; Maximum Operating Temperature: 85 Cel;
37201600001
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .16 A; Terminal Shape: PIN WIRE; Body Length/Diameter: 8.5 mm;
37202500431
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .25 A; Terminal Shape: PIN WIRE; Blow Characteristic: TIME LAG;
37200400411
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .04 A; Terminal Shape: PIN WIRE; JESD-609 Code: e3;
3720050010
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .05 A; Terminal Shape: PIN WIRE; Packing Method: BULK;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved