Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100 A;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.648
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$0.713
Fuses 28802.5 attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Reference Standard:
Manufacturer Series:
Terminal Shape:
Mounting Feature:
28802.5 Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LL4148
Kec
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N2222A
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
M39029/58-360
Carlisle Interconnect Technologies
GENERAL CONN ACCESSORY; Associated Military - Specifications: MIL-C-55302/69, MIL-C-38999; Maximum Operating Temperature: 200 Cel; MIL-Connector Accessory: CONTACT; Terminal Type: CRIMP; MIL Conformity: YES;
SMBJ18CA
Eic Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
CR0805-FX-10R0ELF
Bourns
Bourns CR0805-FX-10R0ELF is a SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for applications requiring a temperature range of -55 to 155 °C, such as automotive electronics and industrial control systems.
1N4148
Unitrode
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJ3EKF1002V
Panasonic
Panasonic's ERJ3EKF1002V is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. It operates b/w -55 to 155 °C and is ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM7805CT
Onsemi
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
M39029/58360
Souriau-sunbank Connection Technologies
Souriau-sunbank's M39029/58360 is a MIL-Spec backshell with CRIMP contact type and male gender. It conforms to MIL-DTL-38999 standards, mates with M39029/56348 contacts, and requires M81969/14-01 insertion tools. Ideal for military applications requiring reliable crimp terminals.
SS14
Goodwork Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Pro-an Electronic
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Polarity: BIDIRECTIONAL; Nominal Breakdown Voltage: 21.05 V; Maximum Repetitive Peak Reverse Voltage: 18 V;
Taiwan Semiconductor
USBLC6-2SC6
STMicroelectronics
USBLC6-2SC6 by STMicroelectronics is a unidirectional transient voltage suppressor diode with a breakdown voltage of 6V. It has a max clamping voltage of 17V and operates in temperatures ranging from -40 to 125°C. This device, with dual terminals and matte tin finish, is ideal for protecting sensitive electronics from voltage spikes in various applications.
Weitronic Enterprise
LM317T
Integrated Power Semiconductors
Other Regulators; No. of Terminals: 3; Operating Temperature (TJ-Min): 0 Cel; Terminal Pitch: 2.54 mm; Maximum Load Regulation (%): 1.5 %; Nominal Dropout Voltage-1: 3 V;
TM4C1294NCPDTI3
Texas Instruments
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
C0805C104K5RACTU
KEMET Corporation
KEMET C0805C104K5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring compact size and reliable performance.
0251004.MRT1L
Littelfuse
Littelfuse 0251004.MRT1L PICO fuse, rated 125V, 4A with very fast blow characteristic. Ideal for circuit protection in applications requiring supplemental protection at -55 to 125 °C. Features include trip time of 0.004s, nominal joule integral of 2.45J, and terminal shape PIN WIRE.
3413.0010.22
Schurter Ag
Schurter Ag's 3413.0010.22 fuse is a 3.2x1.6mm surface mount type with very fast blow characteristic, rated at 0.25A and 125V AC/63V DC for electric circuit protection. It has a pre-arcing rating of 0.0032 A2/s, operates b/w -55 to 90°C, and meets CUL; UL standards, suitable for various electronic applications requiring compact and efficient fuse protection.
ATQR2-1/2
Mersen S A
ATQR2-1/2 by Mersen S A is a 600V, 2.5A time delay electric fuse with a rated breaking capacity of 200kA. Measuring 10.4mm x 38.1mm, it has an end cap terminal shape and operates up to 80°C. Ideal for inline mounting applications, it complies with CSA, CE, and UL standards.
04653.15DR
Littelfuse 04653.15DR is a NANO fuse with 3.15A rated current, 32.4J nominal joule integral, and 0.01s trip time. It is used for circuit protection in applications requiring a time lag blow characteristic at up to 250V AC voltage, such as CE-certified electronics with surface mounting feature.
PTS120624V020
Eaton Corporation
Eaton Corporation's PTS120624V020 fuse, with 0.2A rated current and 24V rated voltage, has a fast blow characteristic. It is a surface mount type electric fuse with TUV and UL reference standards, ideal for circuit protection in various applications.
LPJ-125SPI
Eaton Corporation's LPJ-125SPI fuse, rated at 125A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 41.4mm x 76.2mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300000A. The fuse comes with built-in indicator and can be mounted inline or in a holder for easy installation.
LP-CC-1-1/4
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.25 A; Terminal Shape: END CAP;
KLB4
KLB4 by Littelfuse is a 4A fast blow electric fuse with 250V AC/DC rated voltage, ideal for inline mounting. With dimensions of 14.3mm x 50.8mm and high breaking capacity of 200kA, it meets CSA and UL standards for reliable circuit protection in various applications.
0298100.ZXEH
Littelfuse 0298100.ZXEH MEGA fuse with 100A rated current, 31100J nominal joule integral, and 0.1s trip time. Ideal for circuit protection in automotive applications due to its time delay blow characteristic and high breaking capacity of 2000A.
0297005.U
0297005.U by Littelfuse is a MINI fuse with a rated current of 5A and a rated voltage of 32V. It offers circuit protection, with a trip time of 0.03s and a pre arcing rating of 25 A2/s. It is commonly used in automotive applications for its compact size and high breaking capacity.
NON-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 40 A; Terminal Shape: END CAP;
FNQ-10
The Eaton Corporation FNQ-10 fuse, rated at 10A and 500V, features a time delay blow characteristic. With a compact MIDGET size and CC class, it offers circuit protection with a high breaking capacity of 10000A. Ideal for inline mounting in various applications certified by CE, CSA, and UL standards.
FNQ-R-1-3/10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.3 A; Terminal Shape: END CAP; Packing Method: BOX;
ATM25
ATM25 fuse by Mersen S A is a 25A fast blow electric fuse with a rated voltage of 600V AC/DC. Measuring 10mm x 38mm, it has a midget size and end cap terminal shape, suitable for inline mounting applications. With a high breaking capacity of 100kA, it meets CSA and UL standards for reliable circuit protection in various industrial settings.
C14G40
The Eaton Corporation C14G40 fuse is a 40A electric fuse with a rated AC/DC voltage of 500V. It has a body length/diameter of 14mm and height of 51mm, featuring an end cap terminal shape. With a high breaking capacity of 120kA, it is ideal for inline/holder mounting in various applications requiring reliable circuit protection.
0217.400MXP
Littelfuse 0217.400MXP fuse, rated at 0.4A and 250V, offers very fast blow characteristic with trip time of 0.01s. Measuring 5x20mm, it is used for electric circuit protection in applications requiring a compact 5.2mm x 20mm body size and terminal shape end cap.
ATM-5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 5 A; Terminal Shape: TAB/BLADE; Body Length/Diameter: 10.92 mm;
02183.15HXP
The Littelfuse 02183.15HXP fuse is a 3.15A, 250V time lag electric fuse with dimensions of 5x20mm. It has a rated breaking capacity of 35A and a nominal joule integral of 38.15J, making it suitable for circuit protection in various applications requiring supplemental fuses. This fuse meets standards such as CCC, CE, CSA, IEC, KC, PSE, SEMKO, UL, and VDE for reliable performance in inline/holder mounting configurations.
0453001MR
Littelfuse 0453001MR NANO fuse with 1A current rating and 125V AC/DC voltage. Very fast blow characteristic, 0.459J joule integral, suitable for electric circuit protection in various applications. TR packing method, CSA/PSE/UL standards compliant, surface mountable with wraparound terminals.
FNQ-R-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 10 A; Terminal Shape: END CAP; Rated Voltage: 600 V;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
288001
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Dimensions: 4.5mm x 14.48mm;
288002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 4.5mm x 14.48mm;
288003
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: END CAP; Reference Standard: CSA; METI; MIL; PSE; UL;
288004
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 4 A; Terminal Shape: END CAP; Dimensions: 4.5mm x 14.48mm;
288005
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 5 A; Terminal Shape: END CAP; Reference Standard: CSA; METI; MIL; PSE; UL;
288006
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 6 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
288007
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 125 V; Rated Current: 7 A; Terminal Shape: END CAP; Dimensions: 4.5mm x 14.48mm;
28801.5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Nominal Joule Integral: .8 J;
28803.5
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.5 A; Terminal Shape: END CAP; Blow Characteristic: FAST;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved