Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP; Nominal Joule Integral: 38.7 J;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Northwest PG Solutions
1+ parts
100+ parts
1k+ parts
$3.620
10k+ parts
Native Components
$3.583
Fuses 215004XP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
215004XP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
SS14
Surge Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
RC0603JR-070RL
Yageo
Yageo's RC0603JR-070RL is a SMT fixed resistor with 0 ohm resistance, rated for temperatures from -55 to 155 °C. Its metal glaze/thick film technology and 0.1 W power dissipation make it ideal for jumper applications in various electronic devices.
LM317T
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
BAV99
Sprague Electric
RECTIFIER DIODE; Surface Mount: YES; Maximum Forward Voltage (VF): 1.3 V; Maximum Output Current: .1 A; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 175 Cel;
EU2B-YS3203C
Idec
ROTARY SWITCH;
National Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
CGA3E2X7R1H104K080AA
TDK
CGA3E2X7R1H104K080AA by TDK is a fixed ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This capacitor is commonly used in surface mount applications for various electronic devices.
SMBJ18CA
Micro Commercial Components
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
Frontier Electronics
General Instrument
Rfe International
Inchange Semiconductor
Other Regulators; No. of Terminals: 3; Surface Mount: NO; Technology: BIPOLAR; Minimum Output Voltage-1: 1.2 V; No. of Outputs: 1;
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
2N2222A
Hi-tron Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FDV304P
Fairchild Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Moisture Sensitivity Level (MSL): 1; Maximum Drain Current (ID): .46 A;
KTK-1/2
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: .5 A; Terminal Shape: END CAP;
0257010PXPV
Littelfuse
Littelfuse 0257010PXPV fuse has a rated current of 10A and nominal joule integral of 115J. With dimensions of 19.05mm x 5.08mm x 12.19mm, it is used for circuit protection in applications requiring a max operating temperature of 105°C and rated DC voltage of 32V.
FNQ-R-12
Eaton Corporation
Eaton Corporation's FNQ-R-12 fuse, rated at 12A and 600V AC/300V DC, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and CC class, it is commonly used for circuit protection in various applications requiring a high breaking capacity of 200kA.
SR-5-1A-AP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Body Height: 8.1 mm;
ATDR12
Mersen S A
The Mersen S A ATDR12 fuse is a 12A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a high breaking capacity of 200kA.
FRN-R-40
Eaton Corporation's FRN-R-40 fuse, with 250V AC/125V DC voltage rating and 40A current, features RK5 class and time delay blow characteristic. It is used for electric circuit protection in various applications, meeting CE, CSA, and UL standards. Dimensions: 20.6mm x 76.2mm; Terminal Shape: End Cap; Mounting Feature: Inline/Holder.
LP-CC-3-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 3.5 A; Terminal Shape: END CAP;
0297005WXNV
Littelfuse 0297005WXNV fuse with 5A rated current, 25J nominal joule integral, and 32V DC voltage rating. Ideal for circuit protection in applications requiring inline mounting, such as automotive electronics and industrial equipment. Operating temperature range from -40°C to 125°C ensures reliable performance in various environments.
56000001009
Littelfuse 56000001009 fuse, TR5 size, rated 250V AC/DC. Ideal for circuit protection in electronics. Through-hole mounting, UL and VDE standards compliant, operating temp -40 to 85°C.
KTK-R-2
The Eaton Corporation's KTK-R-2 fuse, rated at 2A and 600V, features a fast blow characteristic with a body size of 10.3mm x 38.1mm. Designed for circuit protection, it has a rated breaking capacity of 200kA and is suitable for inline/holder mounting in various applications compliant with CE, CSA, and UL standards.
ANN-50
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 50 A; Terminal Shape: TAB/BLADE;
FNQ-R-10
FNQ-R-10 by Eaton Corp is a 10A CC fuse with 600V AC voltage rating and time delay blow characteristic. It has nickel terminal finish, 200kA rated breaking capacity, and CE/CSA/UL standards compliance. Ideal for electric circuit protection in inline/holder mounting applications.
LPJ-40SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 40 A; Terminal Shape: END CAP;
FWX-35A
FWX-35A by Eaton Corporation is a 35A electric fuse with 50J nominal joule integral and 200kA rated breaking capacity. Measuring 20.57mm x 40.39mm, it has a rated AC/DC voltage of 250V and is suitable for inline mounting applications in CE, CSA, and UL standards-compliant circuits.
ATDR4-1/2
Mersen S A's ATDR4-1/2 fuse, rated 4.5A and 600V AC, features time delay blow characteristic. With a 200kA breaking capacity, it is ideal for electric circuit protection in various applications requiring inline mounting or holder setup. Compliant with CSA and UL standards, its compact size of 10.4mm x 38.1mm makes it versatile for different electrical systems.
DMM-B-11A
The Eaton Corporation DMM-B-11A fuse is rated for 11A current and 1000V AC/DC voltage with a fast blow characteristic. It features nickel terminal finish, UL reference standard, and 20000A breaking capacity. Ideal for electric circuit protection in various applications due to its compact size of 10mm x 38.1mm and end cap terminal shape.
LP-CC-1-8/10
Eaton Corporation LP-CC-1-8/10 fuse, rated 1.8A and 600V AC, with time delay blow characteristic. Inline/holder mounting for circuit protection in applications requiring 300V DC voltage and 200kA breaking capacity. Meets CE, CSA, UL standards for reliable performance in various electrical systems.
170M1565
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated DC Voltage: 690 V; Rated Current: 63 A; Terminal Shape: TAB/BLADE;
FNQ-R-17-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 17.5 A; Terminal Shape: END CAP;
GMA-1-R
GMA-1-R fuse by Eaton Corporation is a 5x20mm fast blow electric fuse with a rated current of 1A and voltage of 250V. With a nominal joule integral of 0.48J, it offers circuit protection in applications requiring inline mounting or holder installation. Compliant with CSA, PSE, and UL standards, it ensures reliable performance in various electrical systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
215005.P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Rated Breaking Capacity: 1500 A;
215002XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
215001.XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
215005.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
215004.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
215002.P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Terminal Finish: Tin (Sn);
215005XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; JESD-609 Code: e3;
215001
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Rated Breaking Capacity: 1500 A;
215004
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 4 A; Terminal Shape: END CAP; Body Height: 20 mm;
215002.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
215004M
ELECTRIC FUSE; Rated Current: 4 A; Terminal Shape: END CAP; Resistance: .0184 ohm; Rated Breaking Capacity: 1500 A; Minimum Operating Temperature: -55 Cel;
215002M
ELECTRIC FUSE; Rated Current: 2 A; Terminal Shape: END CAP; Fuse Size: 5x20mm; Rated Voltage: 250 V; Blow Characteristic: TIME LAG;
215005
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 5 A; Terminal Shape: END CAP; Body Length/Diameter: 5.2 mm;
215001XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Body Length/Diameter: 5.2 mm;
215002.XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 5.2mm x 20mm;
215001.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Packing Method: BULK; TAPE AND REEL;
215001.P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
215002
215004.P
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved