Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Terminal Finish: SILVER; JESD-609 Code: e4;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$5.407
100+ parts
1k+ parts
10k+ parts
Perfect Parts
Northwest PG Solutions
$5.299
Fuses 0485.500DR attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
JESD-609 Code:
Terminal Finish:
0485.500DR Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
87832-1420
Molex
87832-1420 by Molex is a 14-contact board connector with 0.079" pitch, suitable for commercial applications. It features matte tin over nickel finish, glass-filled polyamide insulator, and polarization key for easy assembly. Withstanding voltage of 1400VAC and operating temperature range from -55 to 105°C make it reliable for various electronic devices.
TM4C1294NCPDTI3
TM4C1294NCPDTI3 by Texas Instruments is a 32-bit microcontroller with Cortex-M4F CPU family. It features 8KB data EEPROM, 20-Ch 12-Bit ADC channels, and 32 DMA channels. Ideal for industrial applications requiring high-speed processing, it offers connectivity options like CAN, Ethernet, I2C, SPI, UART, and USB.
FDN306P
Onsemi
FDN306P by Onsemi is a P-CHANNEL FET with 12V DS Breakdown Voltage, ideal for SWITCHING applications. It features SINGLE configuration with BUILT-IN DIODE and GULL WING terminals. Operating in ENHANCEMENT MODE, it has a max ID of 2.6A and 0.04 ohm RDS(on), suitable for small outline packages at temperatures ranging from -55 to 150°C.
LL4148
Hy Electronic
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
OHN3140U
Tt Electronics Plc
OHN3140U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 2mT. It features an output range of 25mA and operates b/w -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields in various industries.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
ISO1050DUBR
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
SS14
Rugao Dachang Electronic
RECTIFIER DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 40 V; Maximum Forward Voltage (VF): .55 V; No. of Elements: 1; Technology: SCHOTTKY;
2N7002,215
NXP Semiconductors
2N7002,215 by NXP Semiconductors is a small signal N-CHANNEL FET with a min DS breakdown voltage of 60V and max drain current of 0.3A. It is used for switching applications in enhancement mode, operates b/w -65 to 150 °C, and has a max power dissipation of 0.2W.
1N4148
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Promax-johnton
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Terminal Form: GULL WING; Maximum Drain-Source On Resistance: 7.5 ohm; Minimum DS Breakdown Voltage: 60 V;
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
OPA2277UA
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
General Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
Unisonic Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Package Body Material: PLASTIC/EPOXY; Package Shape: RECTANGULAR;
1N4148WT
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Electronic Devices
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
0453003MR
Littelfuse
Littelfuse 0453003MR NANO fuse with 3A current rating, 125V AC/DC voltage, and 1.65J joule integral. Ideal for circuit protection in electronics, featuring very fast blow characteristic and surface mounting feature.
FNM-2-1/2
Eaton Corporation
Eaton Corporation's FNM-2-1/2 fuse is a MIDGET size with 2.5A current rating and 250V AC voltage. It features TIME DELAY blow characteristic for circuit protection, with a rated breaking capacity of 100A. Ideal for inline mounting applications, it meets CE, CSA, and UL standards.
AGC-1-R
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
170M3744
The Eaton Corporation 170M3744 fuse offers 5150J nominal joule integral and 1300V rated AC/DC voltage for circuit protection. With a rated current of 200A and breaking capacity of 100kA, it is ideal for inline mounting in various applications requiring high-level electrical protection.
LPJ-60SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
JLLS050
The Littelfuse JLLS050 fuse is rated for 50A and has a fast blow characteristic. With a rated AC voltage of 600V and DC voltage of 300V, it offers circuit protection with a breaking capacity of 200kA. Commonly used in applications requiring inline mounting, this fuse meets CSA and UL standards.
KTK-R-12
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 12 A; Terminal Shape: END CAP; Reference Standard: CSA; UL;
FNQ-R-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 15 A; Terminal Shape: END CAP;
0287005.L
Littelfuse 0287005.L fuse has a Nominal Joule Integral of 26 J, Trip Time of 0.08 sec, and Rated Current of 5 A. It is used for circuit protection in applications requiring a rated DC voltage of 32 V, with dimensions of 19.1mm x 5.1mm x 12.3mm and terminal shape TAB/BLADE.
3413.0113.22
Schurter Ag
Schurter Ag's 3413.0113.22 fuse is a 1206 size with 0.5A rated current and 125V DC/AC voltage. With very fast blow characteristic, it offers circuit protection in various applications like consumer electronics and industrial equipment. Measuring 3.2mm x 1.6mm x 0.6mm, it has a gold nickel terminal finish and UL/CUL reference standard compliance for reliable performance in temperatures ranging from -55 to 90°C.
0451.160MRL
0451.160MRL by Littelfuse is a NANO fuse with 0.16A rated current and 125V DC voltage, suitable for electric circuit protection. It has a very fast blow characteristic and a rated breaking capacity of 50A, making it ideal for surface mount applications in various industries. With dimensions of 6.1mm x 2.69mm x 2.69mm, this fuse operates b/w -55°C to 125°C temperatures according to CSA and UL standards.
ANN-80
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 125 V; Rated DC Voltage: 80 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
0452003.MRL
Littelfuse 0452003.MRL fuse, rated at 125V, 3A, with slow blow characteristic and trip time of 0.002s. Nano size for circuit protection in applications requiring a 20.16J nominal joule integral and WRAPAROUND terminal shape. Suitable for surface mount installations with CSA, CUL, UL standards compliance.
ATDR25
Mersen S A
The Mersen S A ATDR25 fuse is a 25A time delay electric fuse with a rated AC voltage of 600V and rated DC voltage of 300V. It has a body length/diameter of 10.4mm and terminal shape of END CAP, suitable for inline/holder mounting applications with a high breaking capacity of 200000A.
3413.0009.22
The Schurter Ag 3413.0009.22 fuse is a 3.2x1.6mm surface mount device with a rated current of 0.2A and very fast blow characteristic, suitable for electric circuit protection at 125V AC/63V DC. With dimensions of 3.2mm x 1.6mm x 1.6mm and a max operating temperature of 90°C, it meets CUL and UL standards for various applications requiring quick-acting fuses.
LP-CC-4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 4 A; Terminal Shape: END CAP;
ERBRE2R00V
Panasonic
The Panasonic ERBRE2R00V is a 0603 size fuse with a rated current of 2A and a max operating temperature of 125°C. It is designed for circuit protection in applications requiring fast blow characteristics, such as surface mount electronics.
021501.6MXEP
Littelfuse 021501.6MXEP fuse, rated 1.6A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is ideal for circuit protection in applications requiring a rated breaking capacity of 1500A at temperatures ranging from -55 to 125°C.
SC-60
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 480 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
FWS-10A20FI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 1400 V; Rated DC Voltage: 1000 V; Rated Current: 10 A; Terminal Shape: END CAP;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0485001.DR
Littelfuse 0485001.DR is a NANO fuse with rated current of 1A and rated voltage of 250V, suitable for circuit protection in various applications. It has a fast blow characteristic, trip time of 60s, and nominal joule integral of 0.3044J. This surface mount fuse operates b/w -55°C to 125°C with a max breaking capacity of 100A.
04853.15DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 600 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND;
048502.5DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 600 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
0485002.DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 600 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
048501.5DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 250 V; Rated DC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
04850.5DR
04851.5DR
ELECTRIC FUSE; JESD-609 Code: e4; Terminal Finish: SILVER;
04851DR
04852.5DR
04852DR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved