Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
045806.3DR by Littelfuse is a NANO fuse with 6.3A rated current and 75V DC voltage. It has a trip time of 5s, pre arcing rating of 14.3 A2/s, and is ideal for circuit protection in applications requiring surface mount fuses with gold terminal finish.
Median Price
$1.132
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Arrow
1+ parts
$0.620
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$0.827
DigiKey
$2.820
$1.650
$1.366
Newark
$3.060
$1.890
$1.610
Future Electronics
$0.785
Verical
$1.437
$1.122
$0.967
TME
$1.400
$0.920
IBS Electronics
$1.027
NAC Semi
$1.310
Cyclops Electronics Ltd
VNN
Nova Conductors
Ampacity Inc.
$0.600
Perfect Parts
RC Electronics
Kepictronics
Futuretech Components
Authorized Procurement Solutions
Aranea Global
Higher joule integral means better protection against power surges, making this fuse reliable for protecting electronic devices.
Suitable for low voltage applications, ensuring compatibility with a wide range of electronic devices.
Fast trip time ensures quick response to overcurrent situations, minimizing damage to the circuit and connected devices.
Compact size allows for easy installation in tight spaces or on PCBs, making it ideal for electronic applications with limited space.
Appropriate current rating for protecting electronic circuits, ensuring safe operation under normal conditions.
High operating temperature rating ensures reliability in various environmental conditions, suitable for demanding applications.
Specifically designed for circuit protection, offering reliable and efficient protection against overcurrent events.
Fuses 045806.3DR attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated DC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Body Width:
Dimensions:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
045806.3DR Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
1N4148
Good-ark Electronics
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Forward Voltage (VF): 1 V; No. of Phases: 1;
2N7002
Silicon Standard
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: NO; Maximum Power Dissipation (Abs): .225 W; Maximum Drain-Source On Resistance: 7.5 ohm; Transistor Element Material: SILICON;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
SMBJ18CA
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
Vishay Intertechnology
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NC7WZ17P6X
Onsemi
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
M24308/2-1F
Air Electro
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mating Info.: MULTIPLE MATING PARTS AVAILABLE; MIL Conformity: YES; Additional Features: STANDARD: MIL-DTL-24308;
ULN2803A
Rochester Electronics
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Additional Features: LOGIC LEVEL COMPATIBLE; Qualification: Not Qualified;
LL4148
Sinyork
RECTIFIER DIODE; Surface Mount: YES; Config: SINGLE; No. of Phases: 1; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
NE555D
Texas Instruments
NE555D by Texas Instruments is an 8-terminal IC with a supply voltage range of 4.5V to 16V, suitable for analog waveform generation applications. It operates at temperatures from 0°C to 70°C and has a max supply current of 15mA. The package style is small outline, making it ideal for compact electronic designs.
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
STMicroelectronics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MBR0520LT3G
MBR0520LT3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, ideal for applications requiring high-speed switching and low power loss in compact electronic devices. The package style is small outline, making it suitable for surface mount designs in various electronics.
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
1N4148WS
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WT
Surge Components
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Diotec Electronics
FWP-40A14F
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 700 V; Rated DC Voltage: 700 V; Rated Current: 40 A; Terminal Shape: END CAP;
BK/MDL-1-R
Cooper Electronic Technologies
BK/MDL-1-R by Cooper Electronic Technologies is a 1A electric fuse with 250V AC voltage rating and 11.498J nominal joule integral. Featuring time delay blow characteristic, it has a rated breaking capacity of 35A. Ideal for inline mounting, this fuse is commonly used in circuit protection applications.
SP/LPJ-400SP
Eaton Corporation
Eaton Corporation's SP/LPJ-400SP fuse, rated 400A and 600V AC/300V DC, features time delay blow characteristic. With dimensions of 53.6mm x 38.3mm and TAB/BLADE terminals, it offers circuit protection for high breaking capacity applications in various industries. Compliant with CE, CSA, and UL standards, it is suitable for inline mounting/holders.
37006300410
Littelfuse
Littelfuse 37006300410 TR5 fuse with 0.63A rated current, 250V AC voltage, and 0.02s trip time. Fast blow characteristic for circuit protection in various applications. Dimensions of 8.5mm x 8mm and rated breaking capacity of 35A make it suitable for through-hole mounting.
0034.6618
Schurter Ag
Schurter Ag 0034.6618 fuse has 34J nominal joule integral, rated AC voltage of 250V, and a max operating temperature of 125°C. It is used for circuit protection with a time lag blow characteristic in applications requiring a rated current of 2A and rated breaking capacity of 35A.
0453001.MR
Littelfuse 0453001.MR NANO fuse, rated 1A at 125V AC/DC, with 0.6029J joule integral and 5s trip time. Ideal for circuit protection in electronics due to very fast blow characteristic and compact dimensions of 6.1mm x 2.69mm x 2.69mm. Compliant with CE, CSA, CUL, PSE, TUV, UL standards for various applications.
KTK-1
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 500 V; Rated Current: 1 A; Terminal Shape: END CAP;
TCF40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 40 A; Terminal Shape: TAB/BLADE;
FNQ-R-1/4
Eaton Corporation's FNQ-R-1/4 fuse, rated at 0.25A and 600V AC, features a time delay blow characteristic. With a body length of 10.3mm and diameter of 38.1mm, it is ideal for circuit protection in applications requiring a high breaking capacity of 200kA. The fuse is designed with an end cap terminal shape and nickel finish for use in inline or holder mounting configurations per CE, CSA, and UL standards.
ERBRD0R50X
Panasonic
The Panasonic ERBRD0R50X fuse is a 0402 size with 0.5A rated current and 35A breaking capacity. It has fast blow characteristic, -40 to 125 °C operating temperature range, and UL/CUL standards. Ideal for electric circuit protection in surface mount applications due to its compact size and high breaking capacity.
LPJ-200SPI
Eaton Corporation LPJ-200SPI fuse, rated 200A/600V, J class with time delay blow characteristic. Inline/holder mounting for circuit protection in applications requiring 300kA breaking capacity. Features indicator and meets CE, CSA, UL standards.
ATQR5
Mersen S A
The Mersen S A ATQR5 fuse, rated at 5A and 600V AC/300V DC, features a time delay blow characteristic. With a compact size of 10.4mm x 38.1mm, it is ideal for circuit protection in various applications. Compliant with CSA, CE, and UL standards, it offers a high breaking capacity of 200kA.
7010.9810.63
The Schurter Ag 7010.9810.63 fuse is a 7x2mm electric fuse with a rated current of 1A and very fast blow characteristic. It has a max operating temperature of 125°C, suitable for circuit protection in various electronic devices. Compliant with CUL and UL standards, it offers a rated breaking capacity of 300A for reliable performance.
BK/ATM-10
The Eaton Corporation BK/ATM-10 fuse is a 10A electric fuse with fast blow characteristic. It has dimensions of 10.92mm x 3.81mm x 8.81mm and rated voltage of 32V, suitable for inline mounting applications. With a rated breaking capacity of 1000A, it is UL standard compliant and ideal for circuit protection in various electronic devices.
FNQ-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 10 A; Terminal Shape: END CAP; Blow Characteristic: TIME DELAY;
BK/MDL-5-R
BK/MDL-5-R by Cooper Electronic Technologies is a 5A time delay electric fuse with a rated AC voltage of 250V. It has a nominal joule integral of 32J and a rated breaking capacity of 200A. This fuse is commonly used for circuit protection in applications requiring inline mounting or holder installation.
S320383
Mersen S A's S320383 fuse offers 19500 J nominal joule integral, 690 V rated AC voltage, and 400 A rated current. With ultra-fast blow characteristic, it provides electric circuit protection with a high breaking capacity of 170000 A. Ideal for inline mounting applications in CSA, IEC, and UL standards.
JKS-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 200 V; Rated Current: 40 A; Terminal Shape: END CAP;
0001.2712.11
Schurter Ag 0001.2712.11 fuse: 6.3A, 250V, 171J joule integral; 5x20mm size with time lag blow characteristic. Ideal for circuit protection in applications requiring rated breaking capacity of 1500A and operating temperatures from -55°C to 125°C.
KRP-C-800SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 800 A; Terminal Shape: TAB/BLADE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0458003.DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 3 A; Terminal Shape: WRAPAROUND;
0458001.DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 1 A; Terminal Shape: WRAPAROUND;
045801.5DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 1.5 A; Terminal Shape: WRAPAROUND;
0458007.DR
0458007.DR by Littelfuse is a NANO fuse with 7A rated current, 63V DC voltage, and 20.48J nominal joule integral. It is used for circuit protection in applications requiring a trip time of 5s, such as automotive electronics and industrial equipment.
0458004.DR
0458004.DR by Littelfuse is a NANO fuse with 4A rated current, 32V AC voltage, and 5s trip time. Ideal for circuit protection in applications requiring a compact surface mount design with WRAPAROUND terminals. Meets CUL and UL standards, operating from -55°C to 125°C.
045802.5DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 2.5 A; Terminal Shape: WRAPAROUND;
0458008.DR
0458008.DR by Littelfuse is a NANO fuse with 8A rated current, 63V DC voltage, and 13.448J nominal joule integral. Ideal for circuit protection in applications requiring a surface mount fuse with WRAPAROUND terminals and a pre-arcing rating of 9 A2/s.
0458010.DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 63 V; Rated Current: 10 A; Terminal Shape: WRAPAROUND;
0458002.DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND;
0458002.
ELECTRIC FUSE; Rated Current: 2 A; Terminal Finish: Gold (Au); Reference Standard: UL; Dimensions: 3.18mm x 1.58mm x 1.58mm; Rated Voltage: 63 V;
0458005.DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 32 V; Rated DC Voltage: 75 V; Rated Current: 5 A; Terminal Shape: WRAPAROUND;
045801.6DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 1.6 A; Terminal Shape: WRAPAROUND;
045803.5DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 3.5 A; Terminal Shape: WRAPAROUND;
04581.25DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 1.25 A; Terminal Shape: WRAPAROUND;
04583.15DR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated AC Voltage: 48 V; Rated DC Voltage: 75 V; Rated Current: 3.15 A; Terminal Shape: WRAPAROUND;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved