Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Reference Standard: CE; CSA; KTL; PSE; UL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.498
100+ parts
1k+ parts
10k+ parts
Northwest PG Solutions
$0.548
$0.483
Fuses 0318001HX attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Manufacturer Series:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0318001HX Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8536.10.00.40
SB
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
2N2222A
Micro Commercial Components
Small Signal Bipolar Transistors; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; JESD-609 Code: e0;
LM317T
Samsung
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel; Maximum Line Regulation (%/V): .07;
Aeroflex/metelics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Package Shape: ROUND; Transistor Application: SWITCHING;
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ROHM
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
Changzhou Galaxy Century Microelectronics
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Peak Reflow Temperature (C): 260; No. of Phases: 1; Diode Element Material: SILICON;
NE555D
NXP Semiconductors
SQUARE; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: LSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
BAV99
Vishay Telefunken
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
National Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .5 A;
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Operating Mode: ENHANCEMENT MODE; Transistor Application: SWITCHING;
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Central Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Transistor Application: SWITCHING; Transistor Element Material: SILICON;
ULN2803ADWRG4
Texas Instruments
ULN2803ADWRG4 by Texas Instruments is a peripheral driver with 8 functions, open-collector output, and built-in transient protection. It operates b/w -40 to 85 °C with a max supply voltage of 3 V. Ideal for applications requiring sink current flow direction in a small outline package style.
ATMEGA328P-AU
Microchip Technology
ATMEGA328P-AU by Microchip: 8-bit RISC CPU, 20 MHz clock, 23 I/O lines. Ideal for industrial applications with SPI, TWI, USART connectivity and low power mode. Features include 2048 RAM bytes, 1024 EEPROM size, and 16384 ROM words.
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
RK73H2ATTD10R0F
Koa Speer Electronics
RK73H2ATTD10R0F by Koa Speer Electronics is a 0805 SMT fixed resistor with 10 ohm resistance, 1% tolerance, and 0.25 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V.
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
KLDR015.TXP
Littelfuse
KLDR015.TXP by Littelfuse is a 15A time delay electric fuse with 200.5J nominal joule integral and 600V AC/300V DC rated voltage. It features nickel terminal finish, CSA/UL reference standards, and is commonly used for inline circuit protection applications.
FNQ-R-1
Eaton Corporation
Eaton Corporation's FNQ-R-1 fuse, rated at 1A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is ideal for circuit protection in various applications requiring a rated breaking capacity of 200kA. Compliant with CE, CSA, and UL standards, it can be mounted inline or in a holder for efficient use.
3403.0155.24
Schurter Ag
Schurter Ag's 3403.0155.24 fuse is a TIME LAG type with 0.08A rated current and 250V AC/DC voltage, suitable for ELECTRIC FUSE circuit protection in various applications. With dimensions of 10.1mm x 3mm x 3mm and a rated breaking capacity of 200A, it offers reliable performance at temperatures ranging from -55°C to 125°C. Ideal for surface mount installations, this fuse has a nominal joule integral of 0.022J for efficient energy dissipation.
0215002.MXP
Littelfuse 0215002.MXP fuse, rated 2A and 250V, features time lag blow characteristic with trip delay of 0.01s. With dimensions of 5x20mm, it is used for circuit protection in applications requiring a nominal joule integral of 11.68J and max operating temperature of 125°C.
KTK-R-25
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 25 A; Terminal Shape: END CAP; Body Height: 38.1 mm;
0216001MXP
0216001MXP by Littelfuse is a 5x20mm fuse with a rated current of 1A and fast blow characteristic. It has a nominal joule integral of 0.18J, rated AC voltage of 250V, and trip time of 0.01s. Ideal for circuit protection in applications requiring electric fuses with a max operating temperature of 125°C and reference standards including CCC, CE, CSA, PSE, UL, VDE.
BD40
The Eaton Corporation BD40 fuse offers 1400J nominal joule integral, 550V AC voltage rating, and 40A current rating. Ideal for electric circuit protection in various applications with its inline/holder mounting feature and compliance with BS and IEC standards.
3413.0008.22
Schurter Ag's 3413.0008.22 fuse is a 3.2x1.6mm surface mount type with 0.16A current rating and 125V AC voltage, suitable for electric circuit protection applications. It has a very fast blow characteristic, gold terminal finish, and meets CUL and UL standards for reliable performance in temperatures ranging from -55 to 90°C.
0251004.HAT1L
Littelfuse 0251004.HAT1L PICO fuse, rated 125V, 4A with very fast blow characteristic. Ideal for circuit protection in electronics due to its small size (2.8mm x 7.11mm) and high breaking capacity of 50A. Operating temperature range -55°C to 125°C makes it versatile for various applications.
LPJ-100SPI
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 100 A; Terminal Shape: TAB/BLADE;
FNQ-15
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 15 A; Terminal Shape: END CAP; Fuse Size: MIDGET;
LPJ-100SP
Eaton Corporation's LPJ-100SP fuse, rated at 100A and 600V AC/DC, features a J class with time delay blow characteristic. With dimensions of 28.6mm x 66.7mm, it is suitable for circuit protection in various applications requiring a high breaking capacity of 300kA. Compliant with CE, CSA, and UL standards, it is commonly used in inline or holder mounting configurations.
17.5TDLSJ16
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 17500 V; Rated DC Voltage: 17500 V; Rated Current: 16 A; Terminal Shape: END CAP;
473.5
Littelfuse 473.5 fuse rated for 125V AC/DC, with body dimensions of 3.17mm diameter and 7.11mm height. Ideal for circuit protection in applications requiring through hole mounting, operating b/w -55°C to 125°C temperature range.
CCMR002.TXP
Littelfuse CCMR002.TXP fuse, rated 2A/600V, features time delay blow characteristic. With 200kA breaking capacity, it's ideal for electric circuit protection in CE/CSA/UL compliant applications. Sized at 10.3mm x 38.1mm, it fits inline or holder mounting methods efficiently.
0453005MR
Littelfuse 0453005MR Nano fuse with 5A current rating, 125V AC/DC voltage, and very fast blow characteristic. Ideal for circuit protection in electronics, rated at -55 to 125°C operating temperature range. TR packing method, CSA/PSE/UL standards compliant for surface mount applications.
KTK-10
Eaton Corporation's KTK-10 fuse, rated at 10A and 600V, features fast blow characteristic with a breaking capacity of 100kA. With CE, CSA, and UL certifications, it is ideal for electric circuit protection in applications requiring inline mounting or holder installation.
ATQR1/2
Mersen S A
Mersen S A's ATQR1/2 fuse, rated at 0.5A and 600V AC, features a time delay blow characteristic with a breaking capacity of 200kA. With dimensions of 10.4mm x 38.1mm and an end cap terminal shape, it is ideal for electric circuit protection in various applications requiring inline mounting or holder installation according to CSA and UL standards.
0297005.WXNV
Littelfuse 0297005.WXNV fuse, rated at 5A and 32V, offers quick 0.03s trip time with 37J nominal joule integral. Ideal for circuit protection in automotive applications due to its MINI size and TAB/BLADE terminals. Operating range from -40°C to 125°C ensures reliable performance in various conditions.
FNQ-3-1/2
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0318002.HXP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Dimensions: 6.99mm x 32.72mm;
0318.500HXP
Littelfuse 0318.500HXP fuse, rated at 0.5A and 250V, with fast blow characteristic and trip time of 5s. Ideal for circuit protection in applications requiring a compact 3AG size fuse with through hole mounting. Meets CE, CSA, and UL standards for reliable performance in various electronic devices.
0318003MX
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: PIN WIRE; Dimensions: 6.99mm x 32.72mm;
0318001.MXP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Rated Breaking Capacity: 35 A;
0318002MX
0318003HX
0318002HX
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Manufacturer Series: 318;
0318003.MXBP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: PIN WIRE; Blow Characteristic: FAST;
0318001.HXP
0318002.MXBP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Nominal Joule Integral: 5.2 J;
0318001.P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Body Height: 32.72 mm;
0318002.MXP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; JESD-609 Code: e3;
0318002.VXP
0318001.VXP
0318003.HXP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 3 A; Terminal Shape: PIN WIRE; Trip Time/Delay: 5 Seconds;
0318001.MXBP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Dimensions: 6.99mm x 32.72mm;
0318002.P
0318001MX
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Packing Method: BULK;
0318001VX
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved