Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Rated Current: .35 A; Rated Breaking Capacity: 35 A; Maximum Operating Temperature: 125 Cel; Rated Voltage: 250 V; Fuse Class: Supplemental;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Northwest PG Solutions
1+ parts
100+ parts
1k+ parts
10k+ parts
Native Components
Fuses 02200003DRT1P attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Fuse Size/Group:
Fuse Class:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
JESD-609 Code:
Terminal Finish:
02200003DRT1P Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Taiwan Semiconductor
BSS123NH6327XTSA1
Infineon Technologies
Infineon BSS123NH6327XTSA1 is a N-CHANNEL FET with 100V DS breakdown voltage, 0.19A ID, and 6 ohm RDS(on). Ideal for small outline applications requiring high drain current and low on-resistance. AEC-Q101 compliant for automotive use.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148
Fairchild Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Weitron Technology
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LL4148
Sensitron Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
CRCW080510K0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510K0FKEA is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 reference standard compliance and -55 to 155 °C operating temperature range.
LM107H
Rochester Electronics
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Code: TO-99; Package Shape: ROUND;
LM358N
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
1N5819HW-7-F
SPC TECHNOLOGY/ MULTICOMP
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
2N2222A
Transistor & Electronic
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
Itt Semiconductor
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
MBR0520LT1
Motorola
MBRS340T3G
Onsemi
MBRS340T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.5V and output current of 4A. It operates b/w -65°C to 150°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package. The diode's matte tin terminal finish and dual position make it ideal for surface mount PCB designs.
GMA-1-R
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
KTK-R-1/10
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .1 A; Terminal Shape: END CAP; Body Length/Diameter: 10.3 mm;
520.527
Eska Erich Schweizer
520.527 fuse by Eska Erich Schweizer is a 5x20mm electric fuse with a rated current of 10A and rated AC voltage of 250V. With a blow characteristic of VERY FAST, it offers circuit protection with a nominal joule integral of 204.4J. Ideal for inline mounting, it has a rated breaking capacity of 1500A and min pre-arcing time of 3ms, meeting CE, CUL, IEC, and UL standards.
3403.0166.24
Schurter Ag
Schurter Ag's 3403.0166.24 fuse, rated at 1A and 250V, features a time lag blow characteristic with dimensions of 10.1mm x 3mm x 3mm. Suitable for electric circuit protection in various applications due to its high breaking capacity of 200A and wide temperature range from -55°C to 125°C.
PV-6A10-T
Eaton Corporation
Eaton Corporation's PV-6A10-T fuse, 10x38mm size with 6A rated current and 30J nominal joule integral, is ideal for electric circuit protection. With a rated breaking capacity of 50kA and max operating temperature of 90°C, it suits applications requiring reliable inline mounting in various industries.
35NHG000B
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 500 V; Rated DC Voltage: 250 V; Rated Current: 35 A; Terminal Shape: TAB/BLADE;
LP-CC-3-2/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 2.2 A; Terminal Shape: END CAP;
3413.0328.22
The Schurter Ag 3413.0328.22 fuse is a time lag electric fuse with a rated current of 10A and a max operating temperature of 90°C. It has dimensions of 3.2mm x 1.6mm x 0.6mm and is suitable for surface mount applications in circuit protection systems.
SP/LPJ-400SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 400 A; Terminal Shape: TAB/BLADE;
0217005.MXP
Littelfuse
Littelfuse 0217005.MXP fuse, rated 5A at 250V, with trip time of 0.01s. Ideal for circuit protection in applications requiring very fast blow characteristic. Dimensions: 5x20mm, terminal shape: end cap, and reference standards include BSI, CCC, CE, UL.
FRN-R-35
Eaton Corporation's FRN-R-35 fuse, with 250V AC/125V DC voltage rating and 35A current, features RK5 class and time delay blow characteristic. Ideal for circuit protection in various applications, it comes in a compact size of 20.6mm x 76.2mm with end cap terminal shape for easy mounting in an inline/holder configuration.
0456040.DRSD
0456040.DRSD by Littelfuse is a NANO fuse with 40A rated current, 1700J nominal joule integral, and 125V AC/DC voltage rating. Ideal for circuit protection in applications requiring fast blow characteristic, such as electronics and electrical equipment.
FNQ-R-1-3/10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.3 A; Terminal Shape: END CAP; Packing Method: BOX;
31.7601
ELECTRIC FUSE;
0437.500WR
Littelfuse 0437.500WR is a fast-blow electric fuse with 0.5A rated current and 63V rated voltage, suitable for circuit protection in various applications. With dimensions of 3.2mm x 1.63mm x 0.82mm, it has a trip time of 5s and nominal joule integral of 0.018J, meeting CSA, CUL, and UL standards.
KTK-R-25
Eaton Corporation's KTK-R-25 fuse, rated at 25A and 600V AC, features fast blow characteristic with a breaking capacity of 200kA. It is a CC class fuse with nickel terminal finish, suitable for electric circuit protection in various applications. Dimensions are 10.3mm x 38.1mm, designed for inline mounting in holders per CE, CSA, and UL standards.
ANL-80
ANL-80 by Eaton Corporation is an 81mm x 22.2mm electric fuse with a rated current of 80A and a blow characteristic of time delay. It is commonly used for circuit protection in applications requiring a rated breaking capacity of 2700A and a rated DC voltage of 80V.
LPJ-400SP
Eaton LPJ-400SP fuse, rated 400A at 600V AC/DC, features J class with time delay blow characteristic. Suitable for electric circuit protection in various applications. Compact size of 53.6mm x 38.3mm with TAB/BLADE terminals and high breaking capacity of 300kA.
JJN-30
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 300 V; Rated DC Voltage: 160 V; Rated Current: 30 A; Terminal Shape: END CAP;
0452005MRL
0452005MRL by Littelfuse is a NANO fuse with 125V voltage rating and 5A current. With time lag blow characteristic, it offers circuit protection in various applications. Featuring trip delay of 14400s, it is ideal for use in electronics requiring reliable overcurrent protection.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
02200007MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 350 V; Rated Current: 3 A; Terminal Shape: END CAP; Rated Voltage: 350 V;
02200003ERT1P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: PIN WIRE; Fuse Class: Supplemental;
02200007DRT2P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated Current: 3 A; Terminal Shape: PIN WIRE; Fuse Class: Supplemental;
02200004DRT2P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: PIN WIRE; Rated Breaking Capacity: 35 A;
02200007DAT1P
ELECTRIC FUSE; Rated Current: 3 A; Body Height: 14.48 mm; Pre Arcing Rating (A2/s): 4.62; JESD-609 Code: e3; Fuse Size: 2AG;
02200004DAT1P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: PIN WIRE; Rated Voltage: 250 V;
02200007DRT3P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated Current: 3 A; Terminal Shape: PIN WIRE; Terminal Finish: TIN;
02200003MRT1P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: PIN WIRE; Terminal Finish: TIN;
02200004DRT3P
02200004ERT1P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: PIN WIRE; Fuse Size: 2AG;
02200004MXSLP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: END CAP; Reference Standard: CE, CSA, UL;
02200003MXSLP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: END CAP; Rated Voltage: 250 V;
02200007DRT1P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 350 V; Rated Current: 3 A; Terminal Shape: END CAP; Terminal Finish: Tin (Sn);
02200003DRT3P
ELECTRIC FUSE; Rated Current: .35 A; Fuse Class: Supplemental; Minimum Operating Temperature: -55 Cel; Dimensions: 4.5mm x 14.48mm; Maximum Operating Temperature: 125 Cel;
02200004MRT1P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: PIN WIRE; Minimum Operating Temperature: -55 Cel;
02200004DRT1P
02200003DAT1P
02200003DRT2P
ELECTRIC FUSE; Rated Current: .35 A; Minimum Operating Temperature: -55 Cel; Pre Arcing Rating (A2/s): 0.49; Dimensions: 4.5mm x 14.48mm; Fuse Size: 2AG;
02200003MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: .35 A; Terminal Shape: END CAP; Reference Standard: CE; CSA; UL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved