Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
Littelfuse 0219002.MXAP fuse, rated 2A and 250V, with time lag blow characteristic. Nominal Joule Integral of 92.705J, trip time of 0.02s. Used for circuit protection in applications requiring a 5x20mm fuse size.
Median Price
$1.558
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Distrelec
1+ parts
$0.468
100+ parts
$0.305
1k+ parts
$0.272
10k+ parts
-
Farnell
$0.996
$0.584
$0.446
Arrow
$1.391
$0.863
$0.644
$0.626
Chip1Stop
$1.440
$0.842
$0.643
$0.617
Mouser Electronics
$1.590
$0.929
$0.736
DigiKey
$0.928
$0.709
Newark
$1.610
$0.963
$0.774
$0.759
Element14
$1.620
$1.140
$0.880
Verical
TME
$0.740
$0.507
$0.404
$0.275
IBS Electronics
$0.959
$0.938
NAC Semi
$0.149
VNN
Bristol Electronics
$0.338
$0.252
Microfarads
ACDS - Activité Composants Distribution Service
Nova Conductors
Ampacity Inc.
$0.071
CoreStaff
$0.340
$0.185
$0.132
Continental Prestige Electronics
$0.911
$0.628
$0.455
$0.400
Kepictronics
Perfect Parts
Argo Parts USA
Glotronic Ltd.
Aranea Global
Authorized Procurement Solutions
High joule rating provides excellent protection against power surges and electrical faults.
Suitable for use in standard residential and commercial electrical systems.
Quick tripping time helps in isolating faults and preventing damage to connected equipment.
Compact size allows for easy installation in various electronic devices and circuit boards.
Suitable for protecting low-power electronic devices and circuits from overcurrent situations.
Can withstand high operating temperatures, ensuring reliable performance in diverse environments.
Can be mounted in various ways, offering flexibility in installation options.
Fuses 0219002.MXAP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Trip Time/Delay:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Terminal Finish:
Mounting Feature:
Packing Method:
0219002.MXAP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM317TG
Onsemi
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
LL4148
Leshan Radio
RECTIFIER DIODE; Surface Mount: YES; Maximum Non Repetitive Peak Forward Current: 2 A; Maximum Reverse Recovery Time: .004 us; No. of Phases: 1; Maximum Operating Temperature: 175 Cel;
M24308/2-1F
Esterline Technologies
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Mounting Option-1: HOLE .115-.125; Mounting Type: CABLE AND PANEL; Mating Contact Finish: NOT SPECIFIED;
M39029/58-360
TE Connectivity
TE Connectivity's M39029/58-360 is a CRIMP terminal backshell for 22-28 AWG wires, rated at 5A. Ideal for male contacts in Mil-Spec applications, it offers a cross-section area of 0.34 mm2 and ensures secure connections in demanding environments.
2N2222A
Space Power Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
MBRS360T3G
MBRS360T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.63V and a max output current of 3A. It is designed for applications requiring high-speed switching and low power loss, making it suitable for use in various electronic devices.
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
LAN8720AI-CP-TR
Standard Microsystems
ETHERNET TRANSCEIVER; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 24; Package Code: HVQCCN; Package Shape: SQUARE;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Itt Cannon
CONNECTOR ACCESSORY; Alternate Contacts: 030-2042-000; DIN Conformity: NO; Contact Gender: MALE; Terminal Type: WIRE; MIL-Connector Accessory Name: CONTACT;
1N4148
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Weitron Technology
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Terminal Finish: TIN LEAD; Maximum Operating Temperature: 150 Cel;
Silicon Transistor
EU2B-YS303C
Idec
ROTARY SWITCH;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
LIS3DHTR
LIS3DHTR by STMicroelectronics is a 16-terminal accelerometer with output range of 0.18-1.62V, ideal for motion sensing applications. Operating temperature ranges from -40 to 85°C, making it suitable for various environments. With a compact square package body of 3x3mm and digital voltage output type, it is commonly used in surface mount designs.
8020.5022
Schurter Ag
Schurter Ag's 8020.5022 fuse, rated at 12.5A and 400V, features a time lag blow characteristic with a nominal joule integral of 710J. Ideal for circuit protection in applications requiring an electric fuse with dimensions of 6.3x32mm and operating temperatures ranging from -40 to 85°C.
FNQ-R-1-1/2
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Fuse Class: Supplemental;
JJS-40
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 40 A; Terminal Shape: END CAP; Dimensions: 20.6mm x 39.7mm;
170M3744
Eaton Corporation
The Eaton Corporation 170M3744 fuse offers 5150J nominal joule integral and 1300V rated AC/DC voltage for circuit protection. With a rated current of 200A and breaking capacity of 100kA, it is ideal for inline mounting in various applications requiring high-level electrical protection.
SP/LPJ-125SP
Eaton Corporation's SP/LPJ-125SP fuse, rated 125A and 600V AC, features time delay blow characteristic. With a body size of 41.4mm x 76.2mm and silver terminal finish, it is ideal for electric circuit protection in various applications like CE, CSA, UL standards compliant installations.
JLLS050.TXP
Littelfuse
Littelfuse JLLS050.TXP fuse, rated 50A/600V, with fast blow characteristic. Ideal for electric circuit protection in applications requiring high breaking capacity of 200kA. Features end cap terminal shape and inline mounting method, meeting CE, CSA, and UL standards.
PTS120660V010
Eaton Corporation's PTS120660V010 is a 1206-sized electric fuse with a rated voltage of 60V and a rated current of 0.1A. It has a fast blow characteristic and is suitable for surface mount applications.
0685T2000-01
Bel Fuse
Bel Fuse 0685T2000-01 is a 1206 size fuse with 2A rated current and 63V DC voltage. It has a slow blow characteristic, 0.63J nominal joule integral, and 0.002s trip time. Ideal for circuit protection in automotive applications due to AEC-Q200 compliance and TUV/UL standards.
LPJ-400SPI
Eaton Corporation's LPJ-400SPI fuse, rated at 400A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 53.6mm x 38.3mm, it is suitable for inline mounting applications requiring electric circuit protection and has built-in indicator features.
LP-CC-6-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 150 V; Rated Current: 6.25 A; Terminal Shape: END CAP;
0218.050MXEP
Littelfuse 0218.050MXEP fuse, rated at 250V and 0.05A, features time lag blow characteristic with trip delay of 0.01s. Measuring 5x20mm, it is ideal for circuit protection in applications requiring a max operating temperature of 125°C. Compliant with CCC, CE, CSA, KC, SEMKO, UL, VDE standards.
0297005.H
Littelfuse 0297005.H is a MINI fuse with 5A rated current, 37J nominal joule integral, and 0.03s trip time. It has a rated voltage of 32V and dimensions of 10.9mm x 3.8mm x 8.8mm. Ideal for circuit protection in automotive applications due to its high breaking capacity and pre arcing rating of 25 A2/s.
ANN-80
Eaton Corporation's ANN-80 fuse, rated at 80A and 125V AC/80V DC, features very fast blow characteristic with a breaking capacity of 2500A. With TAB/BLADE terminals and dimensions of 81mm x 22.2mm, it is ideal for electric circuit protection in various applications requiring surface mount installation and built-in indicator feature.
MST160MA250V
SPC TECHNOLOGY/ MULTICOMP
MST160MA250V fuse by Spc Technology/ Multicomp is a 250V slow blow electric fuse with a rated current of 0.16A and nominal joule integral of 0.1331J. It has dimensions of 8.35mm x 4.3mm x 7.7mm, making it suitable for circuit protection in applications requiring a max operating temperature of 125°C and min pre-arcing time of 20ms.
FNQ-R-25
Eaton Corporation's FNQ-R-25 fuse, rated at 25A and 600V, features a time delay blow characteristic. With a compact body size of 10.3mm x 38.1mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 200kA. The fuse is designed with nickel terminal finish and meets CE, CSA, and UL standards for reliable performance.
ATDR17-1/2
Mersen S A
Mersen S A's ATDR17-1/2 fuse, rated 17.5A and 600V AC, features time delay blow characteristic for circuit protection with a high breaking capacity of 200kA. Its compact size (10.4mm x 38.1mm) and end cap terminal shape make it ideal for inline mounting applications requiring UL and CSA standards compliance.
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1.5 A; Terminal Shape: END CAP; Manufacturer Series: FNQ-R;
0157002DRT
0157002DRT by Littelfuse is a 2A electric fuse with 8.2J nominal joule integral and 125V rated AC/DC voltage. Featuring time lag blow characteristic, it is ideal for circuit protection in various applications. Dimensions of 6.1mm x 2.69mm x 2.69mm make it suitable for surface mount installations in electronics requiring reliable overcurrent protection.
LPJ-60SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 60 A; Terminal Shape: END CAP;
LPJ-125SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 125 A; Terminal Shape: TAB/BLADE;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0219002.MXAEP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Trip Time/Delay: .02 Seconds;
0219005.MXAP
Littelfuse 0219005.MXAP fuse, rated 5A and 250V, offers time lag blow characteristic with trip delay of 0.02s. With dimensions of 5x20mm, it provides circuit protection in applications requiring a max operating temperature of 125°C. Compliant with standards such as CCC, CE, CSA, UL, it is suitable for inline mounting in various electronic devices.
021901.6MXAP
Littelfuse 021901.6MXAP fuse, rated at 1.6A and 250V, with a trip time of 0.02s, is ideal for circuit protection in applications requiring a time lag blow characteristic. It has a nominal joule integral of 44.2J and dimensions of 5x20mm, suitable for use in inline/holder mounting setups. Compliant with standards such as CCC, CE, CSA, UL, it offers reliable protection with a rated breaking capacity of 150A.
02193.15MXAP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: END CAP; Reference Standard: CCC; CE; CSA; CUL; PSE; SEMKO; SEV; UL; VDE;
0219.315MXAP
0219.315MXAP by Littelfuse is a time lag electric fuse with a rated current of 0.315 A and a max operating temperature of 125°C. It has a nominal joule integral of 1.23 J and is commonly used for circuit protection in applications requiring a 250 V AC voltage rating.
0219.500MXAP
0219.500MXAP fuse by Littelfuse is a 5x20mm electric fuse with 0.5A rated current and 250V AC voltage. With a time lag blow characteristic, it offers circuit protection with a rated breaking capacity of 150A. Ideal for inline mounting applications, it has a trip time of 0.02s and operates b/w -55°C to 125°C temperatures.
0219001.MXAP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Body Height: 20 mm;
0219002.AXE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Nominal Joule Integral: 92.7 J;
0219001.MXGP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Fuse Size: 5x20mm;
0219002.MRAET1P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Body Length/Diameter: 5.5 mm;
0219002.A
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
0219001.MXEP
ELECTRIC FUSE; Manufacturer Series: 219XA; Terminal Finish: NICKEL;
0219001.AXE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Rated Breaking Capacity: 150 A;
0219001.MXP
ELECTRIC FUSE; Terminal Finish: NICKEL; Manufacturer Series: 219XA;
0219001
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
0219001.MRAET1P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Maximum Operating Temperature: 125 Cel;
0219001.XA
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
0219001.XAP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Terminal Finish: Tin (Sn);
0219001.MXAEP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Terminal Finish: Tin (Sn);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved