Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel;
Median Price
$1.510
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
100+ parts
$0.884
1k+ parts
$0.697
10k+ parts
-
Native Components
$0.073
$0.070
Northwest PG Solutions
$0.080
Fuses 0213002.MXBP attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated AC Voltage:
Rated Voltage:
Pre Arcing Rating (A2/s):
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
Mounting Feature:
0213002.MXBP Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
LM107H/883
Texas Instruments
LM107H/883 by Texas Instruments is a MIL-STD-883 compliant operational amplifier with 3000uV max input offset voltage, 80dB common mode reject ratio, and 250kHz unity gain bandwidth. Ideal for military applications due to its -55 to 125 °C operating temperature range and robust metal package body material.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
MBR0530T1G
Onsemi
MBR0530T1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.375V and output current of 0.5A. It operates b/w -65°C to 125°C, making it suitable for applications requiring high-speed switching in compact electronic devices like smartphones and tablets. The package style is small outline with gull wing terminals for surface mount assembly.
INA826AIDGKR
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
BAV99
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Vishay Telefunken
SMBJ18CA
Leshan Radio
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
SPC TECHNOLOGY/ MULTICOMP
LM107H
Raytheon Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
DS18B20Z
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Housing: PLASTIC; Maximum Accuracy (Cel): 0.50;
M24308/2-1F
Tyco Electronics Amp
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; IEC Conformity: NO; Mixed Contacts: NO; Empty Shell: NO;
Changzhou Galaxy Century Microelectronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ATQR4/10
Mersen S A
Mersen S A's ATQR4/10 fuse, rated 0.4A and 600V, features a time delay blow characteristic. With a compact body size of 10.4mm x 38.1mm, it is ideal for circuit protection in applications requiring inline mounting or holder installation at temperatures up to 80°C. Compliant with CSA, CE, and UL standards.
520.527
Eska Erich Schweizer
520.527 fuse by Eska Erich Schweizer is a 5x20mm electric fuse with a rated current of 10A and rated AC voltage of 250V. With a blow characteristic of VERY FAST, it offers circuit protection with a nominal joule integral of 204.4J. Ideal for inline mounting, it has a rated breaking capacity of 1500A and min pre-arcing time of 3ms, meeting CE, CUL, IEC, and UL standards.
NON-40
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated DC Voltage: 125 V; Rated Current: 40 A; Terminal Shape: END CAP;
LP-CC-1-1/2
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 1.5 A; Terminal Shape: END CAP;
0218001.MXP
Littelfuse
Littelfuse 0218001.MXP fuse has a rated current of 1A and trip time of 0.02s, suitable for circuit protection in applications with 250V AC voltage. With a blow characteristic of TIME LAG, it offers a pre arcing rating of 6.73 A2/s and is compatible with various reference standards like CCC, CE, CSA, UL.
BK/ATM-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Reference Standard: UL;
JJS-60
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 60 A; Terminal Shape: END CAP; Body Length/Diameter: 20.57 mm;
ATDR1/4
Mersen S A's ATDR1/4 fuse, rated 0.25A and 600V AC, features time delay blow characteristic. With a body size of 10.4mm x 38.1mm, it is ideal for circuit protection in applications requiring high breaking capacity up to 200kA such as inline mounting systems compliant with CSA and UL standards.
0251001.MXL
Littelfuse 0251001.MXL PICO fuse, rated 125V, 1A with 0.256J joule integral. Very fast blow characteristic in a compact size of 2.8mm x 7.11mm for supplemental circuit protection applications. Operating temperature range -55 to 125 °C, suitable for electric fuse requirements in various industries.
37212500001
Littelfuse 37212500001 fuse has a rated current of 2.5A and trip time of 0.02s, suitable for circuit protection in applications requiring a 250V AC voltage rating. With a blow characteristic of TIME LAG, it offers a rated breaking capacity of 35A and operates within -40 to 85°C temperature range.
KTK-R-20
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 20 A; Terminal Shape: END CAP; Terminal Finish: Nickel (Ni);
0326.800HXP
Littelfuse 0326.800HXP fuse, rated at 0.8A and 250V, features a time lag blow characteristic with a trip delay of 14400s. Ideal for circuit protection in applications requiring a rated breaking capacity of 100A and pre-arcing rating of 8.2 A2/s.
213.5
213.5 fuse by Littelfuse is a time lag electric fuse with a rated current of 0.5A and rated AC voltage of 250V. With dimensions of 5.2mm x 20mm, it has a nominal joule integral of 2.9J and can operate b/w -55°C to 125°C. This fuse is commonly used for circuit protection in various applications due to its high breaking capacity of 100A and compliance with standards such as CCC, CE, CSA, IEC, SEMKO, and UL.
FRN-R-3.5
Eaton Corporation
Eaton Corporation's FRN-R-3.5 fuse is a 35A, time delay RK5 class electric fuse with a rated AC voltage of 250V and rated breaking capacity of 200kA. It is commonly used for circuit protection in applications requiring inline or holder mounting, such as CE, CSA, and UL reference standards.
02183.15MXP
Littelfuse 02183.15MXP fuse, rated at 3.15A and 250V, with a trip time of 0.02s, is ideal for circuit protection in applications requiring a time lag blow characteristic. It has a nominal joule integral of 38.15J and is designed for use in inline/holder mounting configurations. Compliant with standards such as CCC, CE, CSA, UL, VDE, it ensures reliable performance in various electronic devices.
0AKRBK400-BB
Bel Fuse
Bel Fuse 0AKRBK400-BB is a 400A electric fuse with 500V DC voltage rating. It has a compact body of 49x37x24 mm and can withstand temperatures from -40 to 105°C. Ideal for circuit protection in various applications due to its high breaking capacity and tab/blade terminals.
LPJ-70SPI
The Eaton LPJ-70SPI fuse, rated at 70A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 28.6mm x 66.7mm, it is suitable for inline mounting applications requiring electric circuit protection. This fuse has a high breaking capacity of 300kA and built-in indicator feature, meeting CE, CSA, and UL standards.
0ATO07.5V
Littelfuse 0ATO07.5V fuse with 7.5A rated current, 60J nominal joule integral, and 0.1s trip time is ideal for electric circuit protection. With a rated breaking capacity of 1000A and operating temperatures from -40°C to 125°C, it suits various applications requiring inline mounting in CSA/UL compliant systems.
157.5701.6301
Littelfuse 157.5701.6301 fuse has a trip time of 0.2s, rated current of 300A, and rated voltage of 48V. It is used for circuit protection in applications requiring a compact size and high breaking capacity.
AMG-100
The Eaton Corporation's AMG-100 fuse, with dimensions of 29.2mm x 15.4mm x 9mm, is rated for 100A current and 48V DC voltage. It features TAB/BLADE terminals and UL standard compliance, making it ideal for electric circuit protection in various applications.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
5VT2-R
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Fuse Size: 5x20mm;
0213.500MXP
0213.500MXP fuse by Littelfuse is a 5x20mm electric fuse with a rated current of 0.5A and trip time of 0.02s, suitable for circuit protection in applications requiring a 250V AC voltage rating. With a blow characteristic of time lag and pre-arcing rating of 2.905 A2/s, it offers reliable protection against overcurrent conditions at temperatures ranging from -55°C to 125°C.
0213001.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0213.315MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: .315 A; Terminal Shape: PIN WIRE; Fuse Size: 5x20mm;
021302.5MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2.5 A; Terminal Shape: END CAP; Rated Breaking Capacity: 35 A;
02130.25MXP
02130.25MXP fuse by Littelfuse is a 5x20mm electric fuse with 0.25A rated current and 250V AC voltage. It has a time lag blow characteristic, 0.02s trip delay, and 0.555J nominal joule integral. Ideal for circuit protection in applications requiring inline mounting, it meets standards like CCC, CE, CSA, UL, VDE.
02133.15MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 3.15 A; Terminal Shape: PIN WIRE; Trip Time/Delay: .02 Seconds;
0213005.MXP
Littelfuse 0213005.MXP fuse, rated 5A/250V, with time lag blow characteristic and trip time of 0.02s. Ideal for circuit protection in applications requiring a 5x20mm size fuse with a nominal joule integral of 314J. Operating temperature range from -55 to 125°C makes it suitable for various electronic devices.
02131.25MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1.25 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0213002.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Packing Method: BULK;
0213002.MXGP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Pre Arcing Rating (A2/s): 92.705;
0213001.P
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Nominal Joule Integral: 19.2 J;
0213002.P
0213002.MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Body Length/Diameter: 5.5 mm;
0213002.XP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; JESD-609 Code: e3;
0213001.MRET1P
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Blow Characteristic: TIME LAG;
0213001
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Blow Characteristic: TIME LAG;
0213001.MXBP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: BSI, CCC, CE, CSA, PSE, UL, VDE;
0213002.
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Nominal Joule Integral: 92.7 J;
0213002
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 250 V; Rated Current: 2 A; Terminal Shape: END CAP; Body Length/Diameter: 5.2 mm;
0213001.MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 250 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Fuse Size: 5x20mm;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved