Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ELECTRIC FUSE; Rated Current: 3 A; Terminal Shape: PIN WIRE; Body Length/Diameter: 4.8 mm; Rated Voltage: 350 V; Reference Standard: CE, PSE, UL;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
Native Components
1+ parts
$0.259
100+ parts
1k+ parts
10k+ parts
$0.249
Northwest PG Solutions
$0.285
$0.251
Fuses 0208003.MXE attributes and parameters. Explore more Fuses devices from Littelfuse
Circuit Protection Type:
Rated Current:
Rated Breaking Capacity:
Rated Voltage:
Body Diameter:
Body Height:
Dimensions:
Blow Characteristic:
Fuse Size/Group:
Nominal Joule Integral:
Minimum Operating Temperature:
Maximum Operating Temperature:
Reference Standard:
Terminal Shape:
0208003.MXE Circuit Protection trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
Littelfuse is a diversified industrial technology manufacturing company empowering a sustainable, connected, and safer world. Across more than 20 countries, and with approximately 18,000 global associates, we partner with customers to design and deliver innovative, reliable solutions. Serving over 100,000 end customers, our products are found in a variety of industrial, transportation, and electronics end markets—everywhere, every day. Headquartered in Chicago, Illinois, United States, Littelfuse was founded in 1927.
BAV99
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Eic Semiconductor
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Sangdest Microelectronics (Nanjing)
Synsemi
261
Mercury Systems
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
MMSZ5245BT1G
Onsemi
MMSZ5245BT1G by Onsemi is a Zener diode with 15V nominal reference voltage, 8.5mA test current, and 16 ohm dynamic impedance. It is used in applications requiring precise voltage regulation in a compact SMD package for temperatures ranging from -55 to 150°C.
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SMBJ18CA
Secos
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
ULN2803A
Allegro MicroSystems
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Maximum Operating Temperature: 85 Cel; Terminal Form: THROUGH-HOLE;
Shenzhen Yixinsemi Electronics
EPCS4SI8N
Altera
CONFIGURATION MEMORY; Temperature Grade: INDUSTRIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Parallel or Serial: SERIAL;
FT232RL-TUBE
FTDI
FTDI's FT232RL-TUBE is a bus controller with 28 terminals, operating at 3.3-5.25V. It supports USB, VBUS, and UART interfaces with a data transfer rate of 60MBps. Ideal for industrial applications requiring RS232/RS422/RS485 compatibility in compact designs due to its small outline package style.
0462-201-16141
TE Connectivity
TE Connectivity's 0462-201-16141 is a CRIMP terminal with MACHINED contact design. It operates b/w -55 to 125 °C, suitable for wire gauges from 20 to 16 AWG. With a rated current of 13A, it is ideal for applications requiring FEMALE ROUND PIN-SOCKET contacts.
BSS138
National Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Feedback Capacitance (Crss): 10 pF; JEDEC-95 Code: TO-236AB;
2N2222A
Microchip Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum Operating Temperature: -65 Cel; Terminal Position: BOTTOM;
NUP2105LT1G
NUP2105LT1G by Onsemi is a Transient Suppression Device with 350W power dissipation, 29.1V breakdown voltage, and 44V clamping voltage. Commonly used in electronic circuits for surge protection due to its bidirectional polarity and silicon diode element material.
KTK-1
Eaton Corporation
The Eaton Corporation's KTK-1 fuse is a 10.3mm x 38.1mm fast-blow electric fuse with a rated voltage of 600V and current of 1A. It has a terminal shape of END CAP, rated breaking capacity of 100kA, and meets CSA and UL standards. Ideal for circuit protection in various applications requiring reliable overcurrent protection.
FNQ-R-1-1/2
Eaton Corporation's FNQ-R-1-1/2 fuse, rated at 600V and 1.5A with a time delay blow characteristic, is ideal for electric circuit protection. With a body length of 10.3mm and diameter of 38.1mm, it features nickel terminal finish and inline mounting suitable for various applications meeting CE, CSA, and UL standards.
LPJ-200SP
Cooper Industries
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 200 A; Terminal Shape: TAB/BLADE;
TCF70
The TCF70 by Cooper Industries is a 70A electric fuse with a rated AC voltage of 600V. It has a time delay blow characteristic and a minimum operating temperature of -10°C. The fuse has a body length/diameter of 76.45mm, a body width of 25.4 inch, and a body height of 32mm. It has a tin terminal finish and a rated breaking capacity of 300000A. The TCF70 is suitable for applications that require circuit protection in systems with a maximum operating temperature of 65°C and a rated DC voltage of 300V.
Cooper Electronic Technologies
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: 1 A; Terminal Shape: END CAP; Packing Method: BOX;
LPJ-125SPI
Eaton Corporation's LPJ-125SPI fuse, rated at 125A and 600V AC/300V DC, features a J class with time delay blow characteristic. With a compact body size of 41.4mm x 76.2mm, it is ideal for circuit protection in various applications requiring a high breaking capacity of 300000A. The fuse comes with built-in indicator and can be mounted inline or in a holder for easy installation.
37211000411
Littelfuse
Littelfuse 37211000411 fuse has a rated current of 1A and trip time of 0.02s, suitable for electric fuse circuit protection at 250V AC. With a blow characteristic of TIME LAG and pre arcing rating of 5.5 A2/s, it offers reliable performance in applications requiring a max operating temperature of 85°C.
PTS120616V025
Eaton Corporation's PTS120616V025 fuse, with 16V rated voltage and 0.25A current, offers fast blow characteristic in a 1206 size. Ideal for circuit protection, it has a trip time of 0.08s and operates b/w -40 to 85°C temperatures. Suitable for surface mount applications with TUV and UL standards compliance.
80ET
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 690 V; Rated DC Voltage: 350 V; Rated Current: 80 A; Terminal Shape: TAB/BLADE;
FNQ-R-3-1/2
Eaton Corporation's FNQ-R-3-1/2 fuse, rated at 3.5A and 600V, features a time delay blow characteristic for electric circuit protection. With a body size of 10.3mm x 38.1mm and nickel terminal finish, it is suitable for inline mounting applications in CE, CSA, and UL standard compliant systems.
0251004.MRT1L
Littelfuse 0251004.MRT1L PICO fuse, rated 125V, 4A with very fast blow characteristic. Ideal for circuit protection in applications requiring supplemental protection at -55 to 125 °C. Features include trip time of 0.004s, nominal joule integral of 2.45J, and terminal shape PIN WIRE.
CC12H2A-TR
ELECTRIC FUSE; Mounting Feature: SURFACE MOUNT; Rated DC Voltage: 63 V; Rated Current: 2 A; Terminal Shape: WRAPAROUND; Body Width: 1.6 inch;
CCMR002.TXP
Littelfuse CCMR002.TXP fuse, rated 2A/600V, features time delay blow characteristic. With 200kA breaking capacity, it's ideal for electric circuit protection in CE/CSA/UL compliant applications. Sized at 10.3mm x 38.1mm, it fits inline or holder mounting methods efficiently.
LP-CC-4
LP-CC-4 by Eaton Corp is a 4A time delay electric fuse with 600V AC and 150V DC ratings. Measuring 10mm in body length, it features an end cap terminal shape and inline mounting for circuit protection applications. Compliant with CE, CSA, and UL standards, it offers a high breaking capacity of 200kA.
BK/ATC-10
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated DC Voltage: 32 V; Rated Current: 10 A; Terminal Shape: TAB/BLADE; Manufacturer Series: ATC;
LPJ-70SP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated DC Voltage: 300 V; Rated Current: 70 A; Terminal Shape: TAB/BLADE;
FNQ-R-1/4
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 600 V; Rated Current: .25 A; Terminal Shape: END CAP; Rated Breaking Capacity: 200000 A;
FNQ-R-2-1/4
Eaton Corporation's FNQ-R-2-1/4 fuse, rated at 2.25A and 600V, features a time delay blow characteristic. With a body size of 10.3mm x 38.1mm, it is ideal for circuit protection in applications requiring an electric fuse with a high breaking capacity of 200000A.
FRN-R-40
Eaton Corporation's FRN-R-40 fuse, with 250V AC/125V DC voltage rating and 40A current, features RK5 class and time delay blow characteristic. It is used for electric circuit protection in various applications, meeting CE, CSA, and UL standards. Dimensions: 20.6mm x 76.2mm; Terminal Shape: End Cap; Mounting Feature: Inline/Holder.
0287015.PXCN
0287015.PXCN fuse by Littelfuse has a rated current of 15A and trip time of 0.08s, making it ideal for circuit protection in various applications. With a nominal joule integral of 340J and rated breaking capacity of 1000A, this fuse offers reliable performance. Its compact dimensions (19.1mm x 5.1mm x 12.3mm) and temperature range (-40°C to 125°C) further enhance its versatility in electronic systems.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
0208003MXE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated Current: 3 A; Terminal Shape: PIN WIRE; Rated Breaking Capacity: 100 A;
0208002.MXE
ELECTRIC FUSE; Rated Current: 2 A; Terminal Shape: PIN WIRE; Rated Voltage: 350 V; Fuse Size: 2AG; Minimum Operating Temperature: -55 Cel;
0208001MXE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; Body Length/Diameter: 4.7 mm;
0208003MX
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 350 V; Rated Current: 3 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0208002.MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; Packing Method: BULK;
0208002.MX
ELECTRIC FUSE; Rated Current: 2 A; Terminal Shape: END CAP; Fuse Size: 2AG; Rated Voltage: 350 V; Maximum Operating Temperature: 125 Cel;
0208003.MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated Current: 3 A; Terminal Shape: PIN WIRE; Reference Standard: CE; PSE; UL;
0208001MX
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 350 V; Rated Current: 1 A; Terminal Shape: END CAP; Body Height: 14.48 mm;
0208002MXE
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated Current: 2 A; Terminal Shape: PIN WIRE; JESD-609 Code: e3;
0208001.MXEP
ELECTRIC FUSE; Mounting Feature: THROUGH HOLE; Rated AC Voltage: 350 V; Rated Current: 1 A; Terminal Shape: PIN WIRE; JESD-609 Code: e3;
0208003.MX
ELECTRIC FUSE; Rated Current: 3 A; Terminal Shape: END CAP; Minimum Operating Temperature: -55 Cel; Dimensions: 4.8mm x 14.9mm; Blow Characteristic: FAST;
0208002.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 350 V; Rated Current: 2 A; Terminal Shape: END CAP; Dimensions: 4.7mm x 14.48mm;
0208002.DRT1
ELECTRIC FUSE; Rated Current: 2 A; Terminal Shape: END CAP; Reference Standard: CE, PSE, UL; Rated Voltage: 350 V; Blow Characteristic: FAST;
0208001.MXE
ELECTRIC FUSE; Rated Current: 1 A; Terminal Shape: PIN WIRE; Rated Voltage: 350 V; Body Height: 14.9 mm; Fuse Size: 2AG;
0208002MX
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 350 V; Rated Current: 2 A; Terminal Shape: END CAP; Packing Method: BULK;
0208001.DRT1
ELECTRIC FUSE; Rated Current: 1 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel; Reference Standard: CE, PSE, UL; Minimum Operating Temperature: -55 Cel;
0208001.MX
ELECTRIC FUSE; Rated Current: 1 A; Terminal Shape: END CAP; Reference Standard: CE, PSE, UL; Rated Voltage: 350 V; Minimum Operating Temperature: -55 Cel;
0208001.MXP
ELECTRIC FUSE; Mounting Feature: INLINE/HOLDER; Rated AC Voltage: 350 V; Rated Current: 1 A; Terminal Shape: END CAP; Maximum Operating Temperature: 125 Cel;
0208003.DRT1
ELECTRIC FUSE; Rated Current: 3 A; Terminal Shape: END CAP; Rated Breaking Capacity: 100 A; Nominal Joule Integral: 4.62 J; Rated Voltage: 350 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved