Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Nominal Luminous Intensity (mcd): 3.8; No. of Characters: 1; Maximum Forward Current: .013 A; No. of Functions: 1; Configuration: COMMON ANODE, 1 UNIT;
Median Price
-
Lifecycle Status
Suppliers In-Stock
1
In-Stock Inventory
< 1k
Prism Electronics
1+ parts
100+ parts
1k+ parts
10k+ parts
LED Displays LTP-1557AKY attributes and parameters. Explore more LED Displays devices from Lite-on Technology
Color:
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Current:
Maximum Forward Voltage:
Minimum Luminous Intensity:
Nominal Luminous Intensity (mcd):
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
LTP-1557AKY Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
AB26TRB-32.768KHZ--T
Abracon
AB26TRB-32.768KHZ--T by Abracon is a crystal oscillator with 20 ppm frequency tolerance, 126% stability, and 35000 ohm series resistance. Ideal for applications requiring 0.032768 MHz nominal frequency in surface mount configurations.
LM317T
Tt Electronics Plc
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Qualification Status: Not Qualified; JESD-30 Code: R-PSFM-T3;
1N4148WS
Rectron
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA/2K5
Texas Instruments
OPA2277UA/2K5 by Texas Instruments is a dual operational amplifier with low offset voltage of 100 uV and micropower consumption of 0.004 uA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1 MHz. With a compact rectangular package style, it is suitable for surface mount designs in various electronic systems.
SMBJ18CA
Mde Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
EU2B-YS2J03F
Idec
ROTARY SWITCH;
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Operating Temperature (TJ-Min): 0 Cel; No. of Functions: 1; JESD-609 Code: e0;
LM555CN
Intersil
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
2N2222A
Baneasa S A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; Qualification: Not Qualified;
1N4148
Silicon Standard
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
MMBF170LT1G
Rochester Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .225 W; Package Style (Meter): SMALL OUTLINE; No. of Terminals: 3;
BSS123,215
Nexperia
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Moisture Sensitivity Level (MSL): 1; No. of Terminals: 3; Maximum Time At Peak Reflow Temperature (s): 30;
NDT2955
Onsemi
NDT2955 by Onsemi is a P-CHANNEL FET with 60V DS Breakdown Voltage, ideal for SWITCHING applications. It features a max IDM of 15A and EAS of 174mJ, suitable for ENHANCEMENT MODE operation. With a compact SMALL OUTLINE package and -55 to 150 °C operating range, it offers efficient power dissipation up to 3W.
Daco Semiconductor
MBRS1100T3G
MBRS1100T3G by Onsemi is a Schottky rectifier diode with a max output current of 1A and forward voltage of 0.75V. It operates in temperatures ranging from -65 to 175°C, making it suitable for power applications. With a reverse test voltage of 100V, this diode is ideal for high-power circuits requiring efficient rectification.
LL4148
Excel (Suzhou) Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain Current (ID): .115 A; Operating Mode: ENHANCEMENT MODE;
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LM358M
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM358N
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
HDSP-A901
Hewlett Packard
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .015 A; Color: GREEN; No. of Characters: 1; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
HTIL-311A
Broadcom
SMART/NORMAL 4 X 7 DOT MATRIX LED DISPLAY; Configuration: COMPLEX; No. of Functions: 1; Additional Features: WITH MEMORY/DECODER/DRIVER; Color: RED; Display Height: 6.86 mm;
HDSM-283B
Broadcom's HDSM-283B is a 7-segment numeric LED display with common cathode configuration. It has a peak wavelength of 462nm and max forward current of 0.025A. Ideal for applications requiring blue color displays, operating b/w -40°C to 105°C with a display height of 7mm.
5082-7650
Qt Optoelectronics
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Peak Wavelength (nm): 635; No. of Characters: 1; Maximum Forward Current: .03 A; Maximum Forward Voltage: 2.5 V;
SA23-11SRWA
Kingbright Electronic
SA23-11SRWA by Kingbright Electronic is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with 0.03A forward current. Featuring SUPER BRIGHT RED color, it operates b/w -40 to 85 °C and has a display height of 56.9mm. Ideal for applications requiring clear numeric displays with decimal points.
Quality Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT; Color: HIGH EFFICIENCY RED; Additional Features: IC COMPATIBLE; No. of Functions: 1;
PSC08-11SRWA
The Kingbright Electronic PSC08-11SRWA is a 16 SEG alphanumeric LED display with common cathode configuration. It has a max forward current of 0.03A and operates b/w -40°C to 85°C. Ideal for applications requiring a super bright red display, with a height of 20.32mm.
SL1172-03
SL1172-03 by Onsemi is a Common Cathode 7 SEG NUMERIC LED DISPLAY with peak wavelength of 700nm. It operates b/w -20 °C to 75°C, displaying red light at an 8mm height. Ideal for applications requiring clear numeric displays in various temperature conditions.
TIL396
TIL396 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It has 4 characters, red color, and 3mm display height. With max forward voltage of 2V, it operates b/w -10°C to 70°C. Ideal for applications requiring compact numeric displays like digital clocks and timers.
HDSP-8601
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Peak Wavelength (nm): 566; Maximum Forward Current: .03 A; Display Height: 20 mm;
HDSP-U313
HDSP-U313 by Broadcom is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 583nm. It operates at -25 to 90°C, has forward current of 0.02A and voltage of 2.5V. Ideal for applications requiring YELLOW display with 8mm height and decimal point.
DA56-11GWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Minimum Operating Temperature: -40 Cel; Configuration: COMMON ANODE, 2 DIGITS WITH DECIMAL POINT; Color: GREEN; Maximum Forward Current: .025 A; No. of Functions: 2;
HDSP-5723
Broadcom's HDSP-5723 LED display features 2 digits with decimal point, common cathode configuration, and peak wavelength of 583nm. Ideal for smart/normal numeric displays, it operates b/w -40°C to 100°C, with a max forward current of 0.02A.
Fairchild Semiconductor
Fairchild Semiconductor's 5082-7650 LED display features common anode configuration, 0.03A forward current, and 635nm peak wavelength. Ideal for smart/normal numeric displays with high efficiency red color, operating from -40 to 85°C. Display height of 10.92mm and max forward voltage of 2.5V make it suitable for various applications requiring precise numerical output.
TIL379-12
TIL379-12 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 660nm. It operates b/w -25°C to 85°C, displaying in red color with 3mm height. With max forward voltage of 2.1V, it's ideal for applications requiring precise numeric displays in various environments.
SL1169L
SL1169L by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Anode configuration. Features peak wavelength of 700nm, red color at 15mm display height. Ideal for applications requiring temp range -20 to 75 °C like digital clocks and electronic scoreboards.
VDMR10A0
Vishay Intertechnology
Vishay Intertechnology's VDMR10A0 is a 7 SEG NUMERIC LED DISPLAY with COMMON ANODE configuration. It has a max forward current of 0.025 A and peak wavelength of 639 nm. Ideal for applications requiring a SUPER RED display with 10 mm height, such as digital clocks or electronic meters.
LTP1557AG
Taiwan Liton Electronic C
LTP1557AG by Taiwan Liton Electronic C is a 5x7 dot matrix LED display with common anode configuration. It operates at temperatures from -35°C to 85°C, emitting green light at peak wavelength of 565nm. With a max forward current of 0.013A and voltage of 2.8V, it's ideal for applications requiring high visibility displays in various electronic devices.
HCMS-2351
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; Minimum Operating Temperature: -55 Cel; Color At Wavelength: Yellow; Peak Wavelength (nm): 585;
TIL311
Ams-taos Usa
LED Displays; Maximum Operating Temperature: 85 Cel; Color At Wavelength: Red; No. of Characters: 1; Configuration: N/A; Minimum Operating Temperature: 0 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Lite-on Technology
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved