Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Color: RED ORANGE/GREEN; Maximum Operating Temperature: 85 Cel; Color At Wavelength: Green/Orange; No. of Characters: 1; No. of Functions: 1;
Median Price
-
Lifecycle Status
Suppliers In-Stock
0
In-Stock Inventory
< 1k
LED Displays LTP-1257AA attributes and parameters. Explore more LED Displays devices from Lite-on Technology
Color:
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Current:
Maximum Forward Voltage:
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
LTP-1257AA Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
LM358MX
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Infineon Technologies
BSS138LT1G
Onsemi
BSS138LT1G by Onsemi is a N-CHANNEL FET with 50V DS Breakdown Voltage, 0.2A Drain Current, and 3.5 ohm On Resistance. Ideal for SWITCHING applications due to its ENHANCEMENT MODE operation and built-in DIODE. Operates b/w -55 to 150 °C with small outline package style for surface mount assembly.
ROHM
AT90CAN128-16AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 64; Package Code: TQFP; Package Shape: SQUARE;
ISO1050DUBR
Texas Instruments
ISO1050DUBR by Texas Instruments is a network interface IC with 8 terminals, operating from -55 to 105°C. It features a small outline package, nickel palladium gold finish, and gull wing terminal form. Ideal for telecom applications requiring a 5V supply voltage and peak reflow temperature of 260°C.
LD1117S33TR
STMicroelectronics
LD1117S33TR by STMicroelectronics is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 1.3A. It has a small outline package style, operates at an adjustable temperature range from 0 to 125°C, and is ideal for applications requiring stable voltage regulation in compact electronic devices.
2N7002
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Drain Current (ID): .2 A; Transistor Application: SWITCHING;
BAV99
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Microchip Technology
STM32H743ZIT6
STM32H743ZIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications, offering features such as 21 timers, CAN and USB connectivity, and low power mode.
1N4148WS
Vishay Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS138
Philips Semiconductors
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel;
Diotec Semiconductor Ag
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; Maximum Time At Peak Reflow Temperature (s): 10;
General Instrument
LM317T/NOPB
LM317T/NOPB by Texas Instruments is an adjustable positive single output standard regulator with a max output voltage of 37V and max input-output voltage differential of 40V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in electronic circuits. The package style is flange mount with three terminals for easy installation.
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
Wuxi Xuyang Electronic
HDLO-3416
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); JESD-609 Code: e0; No. of Functions: 4; Color At Wavelength: Red; Maximum Operating Temperature: 85 Cel;
TIL321
TIL321 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 655nm. It has a display height of 13mm and max forward voltage of 2V. Ideal for applications requiring red color output, operating b/w -25°C to 85°C temperature range.
HDSP-F203
Broadcom
Broadcom's HDSP-F203 LED display features common cathode configuration, 10mm height, and high efficiency red color. With a max forward current of 0.03A and peak wavelength of 635nm, it is ideal for smart/normal 7-segment numeric displays in applications requiring temperatures from -40°C to 100°C.
HDSP-F513
HDSP-F513 by Broadcom is a COMMON CATHODE LED Display with 10.16mm height and peak wavelength of 566nm, emitting GREEN light. It has a max forward current of 0.03A and voltage of 2.5V, suitable for SMART/NORMAL 7 SEG NUMERIC DISPLAY applications in temperatures ranging from -40 to 100°C.
TIL323
TIL323 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 565nm. It has a display height of 13mm and max forward voltage of 3.5V. Ideal for applications requiring green light emission, operating b/w -25°C to 85°C temperature range.
HDSP-F101
Agilent Technologies
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Maximum Forward Current: .015 A; Color At Wavelength: Red; No. of Functions: 1; Maximum Operating Temperature: 100 Cel;
TDCG1050M
Vishay Intertechnology
Vishay Intertechnology TDCG1050M is a COMMON ANODE, MULTIPLEXED LED display with 4 digits and decimal point. It operates at -40 to 85°C, with peak wavelength of 575nm in GREEN color. Ideal for clock displays, it has a max forward current of 25mA and height of 10mm.
HDSP-5503-GH000
Broadcom's HDSP-5503-GH000 LED display features common cathode configuration, 0.03A max forward current, and 635nm peak wavelength. Ideal for smart/normal numeric displays, it operates b/w -40 to 100°C and has a 14.22mm height. With high efficiency red color at 2.5V max forward voltage, it suits various applications requiring clear numerical visibility.
HDSP-5521
HDSP-5521 by Broadcom is a COMMON ANODE LED Display with 2 digits, 0.03A forward current, and 635nm peak wavelength. Ideal for numeric displays in applications requiring high efficiency red color, it operates b/w -40 to 100°C with a max voltage of 2.5V.
TDSR0750-HI
Vishay Intertechnology's TDSR0750-HI is a high-intensity red LED display with common anode configuration. Featuring peak wavelength of 650nm, it operates b/w -40°C to 85°C. Ideal for smart/normal numeric displays, it has a forward current of 0.01A and max forward voltage of 2.4V.
SL1086-53T
SL1086-53T by Onsemi is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. Featuring peak wavelength of 700nm and red color, it has 4 characters with 64mm display height. Ideal for applications requiring temperature range from -20 °C to 50°C.
HDSP-5553
HDSP-5553 by Broadcom is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 635nm. It has a max forward current of 0.015A and operates b/w -40°C to 100°C. Ideal for applications requiring HIGH EFFICIENCY RED display, such as digital clocks or temperature indicators.
HDSP5703
Three-five Systems
HDSP5703 by Three-five Systems is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 583nm. It has common cathode configuration, 14mm display height, and operates b/w -40°C to 100°C. Ideal for applications requiring yellow color at wavelength and max forward voltage of 2.5V.
HCMS-2961
Broadcom's HCMS-2961 is a 5x7 dot matrix LED display with peak wavelength of 583nm. It operates b/w -40°C to 85°C, has max forward voltage of 5.5V, and displays yellow color. Ideal for applications requiring compact, high-quality alphanumeric displays.
HDSP-U503
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Color: HIGH PERFORMANCE GREEN; No. of Characters: 1; No. of Functions: 1;
Broadcom's HDSP-U503 is a COMMON CATHODE 7-segment LED display with peak wavelength of 566nm. It operates b/w -25°C to 90°C, with max forward current of 0.03A and height of 8mm. Ideal for applications requiring high performance green color displays.
HDSP-523Y
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin (Sn); Color: YELLOW; Display Height: 14.2 mm; No. of Characters: 2; Minimum Operating Temperature: -35 Cel;
5082-7651
Fairchild Semiconductor's 5082-7651 LED display features COMMON ANODE configuration, 0.03A max forward current, and 635nm peak wavelength. Ideal for SMART/NORMAL numeric displays with HIGH EFFICIENCY RED color at 10.92mm height. Operates b/w -40 to 85°C, with a max forward voltage of 2.5V for various applications.
HDSP-U201
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Current: .03 A; Color At Wavelength: Red; Color: HIGH EFFICIENCY RED; Configuration: COMMON ANODE, 1 DIGIT WITH DECIMAL POINT;
HDSP-4205
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: IC COMPATIBLE; Color At Wavelength: Yellow; Maximum Forward Current: .04 A; Configuration: COMMON CATHODE, 1 DIGIT WITH DECIMAL POINT;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Lite-on Technology
Supply Digital Components
1+ parts
$106.00
100+ parts
$54.25
1k+ parts
$11.90
10k+ parts
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved