Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Additional Features: IC COMPATIBLE; Color: SUPER RED; Minimum Operating Temperature: -35 Cel; Maximum Forward Current: .025 A;
Median Price
$4.190
Lifecycle Status
Suppliers In-Stock
9
In-Stock Inventory
1k+
DigiKey
1+ parts
100+ parts
$3.020
1k+ parts
$2.147
10k+ parts
$1.891
Mouser Electronics
$4.210
$2.800
$1.920
$1.650
Avnet
-
$1.848
$1.782
Semtec, LLC
Prism Electronics
Connector Distribution Corp
Right Parts Inc.
Electronics Depot
Sunrise Surplus Inc.
Advanced Electronics
$0.165
$0.150
$0.135
LED Displays LTC-4727JR attributes and parameters. Explore more LED Displays devices from Lite-on Technology
Additional Features:
Color:
Color At Wavelength:
Configuration:
Display Height:
Maximum Forward Current:
Maximum Forward Voltage:
JESD-609 Code:
No. of Characters:
No. of Functions:
Maximum Operating Temperature:
Minimum Operating Temperature:
Optoelectronic Type:
Peak Wavelength (nm):
Sub-Category:
Terminal Finish:
LTC-4727JR Optoelectronics trade compliance attributes, and parameters.
HTS
8541.40.20.00
SB
Founded in 1975, LITEON embraces being “Best Partner in Opto-Electronic, Eco-Friendly and Intelligent Technologies” as its vision to focus on the development of optoelectronics and key electronic components, and strives to build up competitive edge through resource integration and optimized management. LITEON produces products that are used in a broad range of applications, such as computers, communications, consumer electronics, automotive electronics, LED lighting, cloud computing as well as healthcare. LITEON is a worldwide leading provider of optoelectronics, information technology and storage devices components.
STM32F103C8T6
STMicroelectronics
STM32F103C8T6 by STMicroelectronics is a 32-bit microcontroller with 48 terminals, operating at up to 16 MHz. It features 10-Ch 12-Bit ADC channels and 7 DMA channels, suitable for industrial applications requiring low power consumption and high-speed connectivity via CAN, I2C(2), SPI(2), USART(3), USB.
SMBJ18CA
Uniohm
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
Raytheon Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Minimum DC Current Gain (hFE): 100; Maximum Turn On Time (ton): 35 ns;
1N4148
Forward International Electronics
RECTIFIER DIODE; Surface Mount: NO; Maximum Output Current: .15 A; Maximum Reverse Recovery Time: .004 us; Maximum Operating Temperature: 200 Cel; No. of Phases: 1;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
MMBF170LT1G
Onsemi
MMBF170LT1G by Onsemi is a N-CHANNEL FET with 60V DS Breakdown Voltage and 0.5A Drain Current. Ideal for SWITCHING applications, it operates in ENHANCEMENT MODE with a max power dissipation of 0.225W. This small outline transistor has a temperature range from -55 to 150 °C.
LM7805CT
FIXED POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Package Code: TO-220; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %;
LM317T
Analog Devices
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; No. of Functions: 1; Package Body Material: PLASTIC/EPOXY; Surface Mount: NO;
FDLL4148
FDLL4148 by Onsemi is a single rectifier diode with a max reverse recovery time of 0.004 us. With a max forward voltage of 1V and output current of 0.2A, it is ideal for applications requiring fast switching speeds in electronic circuits. The diode's glass package body material and isolated case connection make it suitable for surface mount designs operating at temperatures up to 175°C.
BAT54C-7-F
Diodes Incorporated
BAT54C-7-F by Diodes Inc. is a Schottky rectifier diode with common cathode, 2 elements, and max forward voltage of 0.24V. Ideal for applications requiring fast reverse recovery time of 0.005 us, such as in small outline packages for surface mount technology at temperatures ranging from -65 to 150°C.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
Gec Plessey Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148WT
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Lite-on Semiconductor
1N4148WS
First Components International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Shandong Yiguang Electronic Joint Stock
Panjit International
SA36-11GWA
Kingbright Electronic
SA36-11GWA by Kingbright Electronic is a COMMON ANODE, 1 DIGIT LED Display with 0.025 A Forward Current and 565 nm Peak Wavelength. Ideal for SMART/NORMAL 7 SEG NUMERIC applications, it operates b/w -40 to 85 °C displaying GREEN color at 9.14 mm height.
SC08-11YWA
Kingbright
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Maximum Forward Current: .03 A; No. of Functions: 1; Additional Features: IC COMPATIBLE; Minimum Operating Temperature: -40 Cel; Color: YELLOW;
TIL831
TIL831 by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with Common Cathode configuration. Featuring peak wavelength of 655nm and red color, it has 4 characters with 13mm display height. With max operating temp of 85°C and min of -25°C, it has a max forward voltage of 2V. Ideal for applications requiring numeric displays in various electronic devices.
HCMS-2905
Broadcom
Broadcom's HCMS-2905 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, with max forward voltage of 5.5V. Ideal for applications requiring compact, high-quality red displays in harsh environments.
HCMS-3976
Agilent Technologies
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Forward Voltage: 3.3 V; Display Height: 4.57 mm; No. of Functions: 8; Color At Wavelength: Orange-Red;
LBP-602MK2
ROHM
ROHM's LBP-602MK2 LED Display features 2 digits with decimal point, peak wavelength of 572nm, and max forward current of 0.02A. Ideal for smart/normal numeric displays in applications requiring a temp range of -25 to 75°C.
KCSC02-102
KCSC02-102 by Kingbright Electronic is a COMMON CATHODE 7 SEG NUMERIC LED DISPLAY with 0.025 A forward current. Featuring a 5.08 mm display height and SUPER BRIGHT GREEN color, it operates b/w -40 to 85 °C, suitable for various applications requiring clear numeric displays.
DMS-20PC-1-RL-C
Murata Manufacturing
Murata's DMS-20PC-1-RL-C LED display features 0.012A max forward current, 9.4mm display height, and operates b/w 0°C to 60°C. Ideal for SMART/NORMAL 7 SEG numeric displays in various applications.
HCMS-2973
Broadcom's HCMS-2973 is a 5x7 dot matrix LED display with peak wavelength of 568nm. Featuring 8 functions, it operates b/w -40°C to 85°C. Ideal for applications requiring a green color display with max forward voltage of 5.5V and character limit of 8.
TIL326A
TIL326A by Texas Instruments is a 7 SEG NUMERIC LED DISPLAY with peak wavelength of 588nm. It has common cathode configuration, orange color at 13mm display height. With max forward voltage of 3V, it operates b/w -25°C to 85°C making it ideal for various applications requiring numeric displays.
HDSP-5601
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Silver/Copper (Sn/Ag/Cu); Color At Wavelength: Green; Maximum Operating Temperature: 100 Cel; Maximum Forward Voltage: 2.5 V; No. of Characters: 1;
HCMS-2971
Hewlett Packard
SMART/NORMAL 5 X 7 DOT MATRIX LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 5.08 mm; Peak Wavelength (nm): 583; No. of Characters: 8; JESD-609 Code: e0;
LTC-571HR
Lite-on Technology
LTC-571HR by Lite-on Technology is a COMMON CATHODE, MULTIPLEXED 3-digit LED display with peak wavelength of 635nm. It operates b/w -35°C to 85°C, has a display height of 14.2mm, and requires a max forward current of 0.025A. Ideal for numeric displays in various applications due to its high efficiency red color and smart/normal optoelectronic type.
LA-301VB
ROHM LA-301VB is a COMMON ANODE 7 SEG NUMERIC LED DISPLAY with peak wavelength of 650nm. It operates at -25 to 75°C, with max forward current of 0.015A and voltage of 2.8V. Ideal for applications requiring red color display with decimal point, such as digital clocks or timers.
HDSP-316Y
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Operating Temperature: 100 Cel; Minimum Operating Temperature: -40 Cel; Color: YELLOW; Maximum Forward Voltage: 2.5 V;
HDSP-U313
SMART/NORMAL 7 SEG NUMERIC LED DISPLAY; Terminal Finish: Tin/Lead (Sn/Pb); Display Height: 8 mm; Minimum Operating Temperature: -25 Cel; No. of Characters: 1; Maximum Forward Current: .02 A;
HDLU-1414
Broadcom's HDLU-1414 is a 5x7 dot matrix LED display with peak wavelength of 645nm. It operates b/w -40°C to 85°C, featuring red color at 3.7mm height. Ideal for applications requiring a compact, high-performance LED display with four functions.
AML92EWL
Micro Switch
SINGLE COLOR LED DISPLAY CLUSTER; Maximum Operating Temperature: 60 Cel; No. of Functions: 1; Minimum Operating Temperature: -20 Cel; Maximum Forward Current: .05 A; Color: WHITE;
HDSP-5501-GG000
Broadcom's HDSP-5501-GG000 LED Display features COMMON ANODE configuration, 14.22mm display height, and HIGH EFFICIENCY RED color. With a peak wavelength of 635nm, it is ideal for SMART/NORMAL 7 SEG NUMERIC applications requiring a max forward current of 0.03A and operating temperatures ranging from -40 to 100°C.
TA12-11EWA
Kingbright Electronic's TA12-11EWA LED display features COMMON CATHODE configuration, 0.03A forward current, and 625nm peak wavelength. Ideal for applications requiring a 30mm HIGH EFFICIENCY RED display with SMART/NORMAL 5 X 7 DOT MATRIX technology. Operating temperature ranges from -40°C to 85°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved