Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 121; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;
Median Price
$57.550
Lifecycle Status
Suppliers In-Stock
12
In-Stock Inventory
1k+
Element14
1+ parts
$50.250
100+ parts
$39.630
1k+ parts
$34.720
10k+ parts
-
Chip1Stop
$52.700
$41.900
DigiKey
$44.913
$41.861
Mouser Electronics
$60.720
$48.020
$46.920
Newark
$64.020
$49.960
Nova Conductors
$40.060
Digiode
$42.864
Chip Stock
Vyrian
Anansix
Velocity Electronics
Sunrise Surplus Inc.
Advanced Electronics
$2.907
$2.761
AZTECH Wire
$9.292
MARBEL Systems
$11.590
Parana Technologies
$11.643
$10.828
IDEA Electronic Components Group
$12.519
$11.893
Texas Native Microelectronics
$13.322
$12.789
$12.389
$11.723
Kenton Components
$15.986
$14.068
Aztec Data Supply Inc.
$18.080
DigiPath Technology Company
$19.530
$18.748
Corohmni
$20.342
Qasali Group International
$35.969
$33.452
$31.653
Ampacity Inc.
$38.350
Semicontronic
$37.391
$37.200
Continental Prestige Electronics
$39.790
$38.994
Bastille Electronics
$38.057
$35.653
Corphita
$40.608
iodParts Technologies Inc.
Lixinc
Authorized Procurement Solutions
Perfect Parts
Futuretech Components
Robosynatics
Lucentia Tech
Argo Parts USA
A-Z Elektronik GmbH
Switching Regulators & Controllers LTM8055EY#PBF attributes and parameters. Explore more Switching Regulators & Controllers devices from Linear Technology
Additional Features:
Other IC type:
Control Mode:
Control Technique:
Maximum Input Voltage:
Minimum Input Voltage:
Nominal Input Voltage:
JESD-30 Code:
JESD-609 Code:
Length:
No. of Functions:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Shape:
Package Style (Meter):
Maximum Seated Height:
Surface Mount:
Switcher Config:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width (mm):
LTM8055EY#PBF Other Function Semiconductors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
LM317T
Micro Commercial Components
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Moisture Sensitivity Level (MSL): 1; Maximum Output Current-1: 1.5 A; Operating Temperature (TJ-Min): 0 Cel;
MC7805CTG
Onsemi
MC7805CTG by Onsemi is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation. The package style is flange mount with through-hole terminals, ensuring easy installation and reliability in diverse electronic designs.
ULN2803A
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Package Body Material: PLASTIC/EPOXY; Qualification: Not Qualified;
2N7002
Calogic
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): NOT SPECIFIED; Terminal Position: DUAL;
SMBJ18CA
Meritek Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
2N2222A
Minilogic Device
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .001 A;
1N4148
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Capar Components
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Forward Voltage (VF): 1 V; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Output Current: .15 A;
ERJ2RKF1002X
Panasonic
Panasonic's ERJ2RKF1002X is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.1 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and operating temperature range of -55 to 155 °C.
MMBT3906LT1G
MMBT3906LT1G by Onsemi is a PNP BJT with VCEsat of 0.4V, hFE of 30, and fT of 250MHz. Ideal for small signal applications in electronics due to its low power dissipation, high transition frequency, and compact SOT-23 package. Suitable for use in temperature-sensitive environments with an operating range from -65°C to 150°C.
YOUTAI SEMICONDUCTOR CO LTD
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Terminal Form: GULL WING; No. of Terminals: 18; Package Code: SOP; Package Shape: RECTANGULAR; JESD-30 Code: R-PDSO-G18;
Changzhou Starsea Electronics
SS14
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BAV99
Diotec Semiconductor Ag
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Infineon Technologies
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .5 W; Transistor Element Material: SILICON; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
Zetex Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Baneasa S A
LL4148
Transys Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Ksl Microdevices
PLMR51420XDDCT
PLMR51420XDDCT by Texas Instruments is a switching regulator with 2A output current, 1100 kHz max frequency, and 34.2V max output voltage. Ideal for applications requiring efficient power conversion in compact spaces.
LMZ31710RVQT
LMZ31710RVQT by Texas Instruments is a current-mode switching regulator with a max output current of 10A and a max switching frequency of 1200kHz. It operates in industrial temperature grades, with a min input voltage of 2.95V and nominal output voltage of 1.8V. Ideal for applications requiring efficient power conversion in compact spaces.
XTPS62933DRLR
XTPS62933DRLR by Texas Instruments is a switching regulator with 8 terminals, operating b/w -40 to 150°C. It offers a max output current of 3A, control via pulse width modulation, and supports buck configuration. Ideal for automotive applications due to its small size (2.1mm x 1.2mm) and high switching frequency of 2200kHz.
LM27313XMFX/NOPB
National Semiconductor
Switching Regulator or Controllers; No. of Terminals: 5; Package Code: TSOP; Package Shape: RECTANGULAR; Surface Mount: YES; JESD-30 Code: R-PDSO-G5;
SG3525ANG
SG3525ANG by Onsemi is a VOLTAGE-MODE switching controller with 16 terminals. It operates b/w 0-70°C, handles up to 400 kHz switching frequency, and supports push-pull switcher config. Ideal for applications requiring PWM control of power converters in the commercial temperature range.
LM3150MHE/NOPB
SWITCHING CONTROLLER; Temperature Grade: AUTOMOTIVE; No. of Terminals: 14; Package Code: HSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2675MX-ADJ/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LM2674MX-3.3/NOPB
PUCC12050DVE
The Texas Instruments PUCC12050DVE is a 16-terminal switching regulator with a nominal input voltage of 5V and output voltage of 3.3V. With a temperature range from -40 to 125°C, it's ideal for automotive applications. This compact device in small outline package is surface mountable and features gull wing terminals.
LM5156HPWPR
LM5156HPWPR by Texas Instruments is a switching controller with a 12V nominal input voltage, operating b/w -40 to 150°C. It features a buck-boost switcher configuration, supports up to 300V output voltage, and has a max switching frequency of 2200 kHz. Ideal for automotive applications due to AEC-Q100 screening level.
TPS63000DRCT
TPS63000DRCT by Texas Instruments is a switching regulator with max output voltage of 5.5V and max output current of 2A. It operates b/w -40 to 85°C, ideal for industrial applications requiring efficient power conversion in a compact form factor. With a control mode of current-mode PWM, it offers precise regulation for various electronic devices.
TL494BDR2G
TL494BDR2G by Onsemi is a 16-terminal switching controller with voltage-mode control technique. It operates b/w -40 to 125 °C and supports a max output current of 0.5 A at a frequency of 200 kHz. Ideal for automotive applications due to its small outline package style and push-pull switcher configuration.
LM2594HVMX-ADJ/NOPB
SWITCHING REGULATOR; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES; Maximum Input Voltage: 60 V;
LM2674M-5.0/NOPB
LM2674M-5.0/NOPB by Texas Instruments is a voltage-mode switching regulator with a max output current of 0.5A and a max output voltage of 37V, suitable for automotive applications. Operating b/w -40°C to 125°C, it has a small outline package style and offers a wide input voltage range from 6.5V to 40V, making it ideal for various power supply designs.
TPS62160DSGR
TPS62160DSGR by Texas Instruments is a switching regulator with a max output current of 2.45A and max output voltage of 6V. It operates in industrial temperature range, ideal for applications requiring high efficiency power conversion in compact spaces. With a small outline package style and very thin profile, it's suitable for various electronic devices needing precise voltage regulation.
LM46002PWPR
LM46002PWPR by Texas Instruments is a 16-terminal switching regulator with a max output current of 2A and max output voltage of 28V. Ideal for automotive applications, it operates b/w -40 to 125°C, supports PWM control mode, and has a buck switcher configuration.
LMZ14201HTZX/NOPB
LMZ14201HTZX/NOPB by Texas Instruments is a switching regulator with 7 terminals, operating b/w -40 to 125°C. It offers a voltage output range of 5-24V and supports buck-boost configuration. Ideal for automotive applications due to its compact size (10.16x9.85x4.82mm) and high max switching frequency of 1000 kHz.
LM2842XMK-ADJL/NOPB
LM2842XMK-ADJL/NOPB by Texas Instruments is a switching regulator with a max output current of 0.6A and a control mode of current-mode PWM. It operates in automotive-grade temperatures from -40 to 125°C, making it suitable for various applications such as power management in automotive electronics.
LM2733XMFX/NOPB
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 5; Package Code: LSSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LMR36520ADDAR
LMR36520ADDAR by Texas Instruments is a switching regulator with 24V nominal input/output voltage, 2A max output current, and 460kHz max switching frequency. Ideal for automotive applications due to its -40 to 125°C operating temperature range and compact design in a small outline package.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTM8055MPY#PBF
Linear Technology
SWITCHING REGULATOR; Temperature Grade: MILITARY; No. of Terminals: 121; Package Code: BGA; Package Shape: SQUARE; Surface Mount: YES;
Analog Devices
Analog Devices LTM8055MPY#PBF is a switching regulator with 121 terminals, operating b/w -55 to 125°C. It uses current-mode control and pulse width modulation technique for buck-boost configuration. Ideal for military applications due to its robust design and wide input voltage range of 5-36V.
LTM8055IY#PBF
Analog Devices LTM8055IY#PBF is a switching regulator with 121 terminals, operating temp. range -40 to 125°C. It uses current-mode control technique, supports input voltage of 5-36V, and has a buck-boost switcher config. Ideal for automotive applications due to its moisture sensitivity level of MSL3 and compact square package design (15x15mm).
LTM8074IY#PBF
LTM8074IY#PBF by Analog Devices is a switching regulator with 25 terminals, operating temperature range of -40 to 125°C, and max frequency of 2200 kHz. Ideal for automotive applications due to its fine pitch grid array package style and pulse width modulation control technique.
LTM8055MPY
LTM8055MPY by Analog Devices is a switching regulator with 121 terminals, operating b/w -55 to 125°C. It features current-mode control and pulse width modulation, suitable for military-grade applications. With a wide input voltage range of 5-36V, it is ideal for buck-boost configurations in various electronic systems.
LTM8055EY#PBF
LTM8055EY#PBF by Analog Devices is a switching regulator with 121 terminals, operating temperature range of -40 to 125°C. It features current-mode control, pulse width modulation, and buck-boost configuration. Ideal for automotive applications due to its high input voltage range of 5-36V and compact square package design.
LTM8074EY#PBF
Analog Devices' LTM8074EY#PBF is a current-mode switching regulator with a buck configuration. It operates b/w -40 to 125°C, suitable for automotive applications. With a max input voltage of 40V and switching frequency of 2200 kHz, it offers efficient power management in compact grid array packaging.
LTM8055IY
Analog Devices' LTM8055IY is a switching regulator with 121 terminals, operating temperature range of -40 to 125°C. It features current-mode control, PWM technique, and buck-boost configuration. Ideal for automotive applications due to its moisture sensitivity level of 3 and input voltage range from 5V to 36V.
LTM8073IY#PBF
Analog Devices' LTM8073IY#PBF is a 48-terminal switching regulator with a max operating temperature of 125°C. It features current-mode control, pulse width modulation, and a buck switcher configuration. Ideal for automotive applications, this IC has a wide input voltage range from 3.4V to 60V and operates at a max switching frequency of 3000 kHz.
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 48; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
LTM8020EV#PBF
SWITCHING REGULATOR; Temperature Grade: OTHER; No. of Terminals: 21; Package Code: LGA; Package Shape: SQUARE; Surface Mount: YES;
LTM8020EV#PBF by Analog Devices is a switching regulator with 21 terminals, operating temperature range of 0-85°C, and max input voltage of 36V. It features current-mode control mode, BUCK switcher configuration, and a max switching frequency of 450 kHz. Ideal for applications requiring efficient power conversion in compact spaces.
LTM8020IV#PBF
SWITCHING REGULATOR; Temperature Grade: INDUSTRIAL; No. of Terminals: 21; Package Code: LGA; Package Shape: SQUARE; Surface Mount: YES;
LTM8020IV#PBF by Analog Devices is a current-mode switching regulator with a max input voltage of 36V and operating temperature range from -40 to 85°C. It features a buck switcher configuration, operates at a max frequency of 450kHz, and is ideal for industrial applications requiring precise power management in compact spaces.
LTM8055EY-1#PBF
LTM8055EY-1#PBF by Analog Devices is a switching regulator with a max operating temperature of 125°C and a min operating temperature of -40°C. It has a control mode of current-mode and a max switching frequency of 800 kHz. This device is commonly used in automotive applications.
LTM8064IY#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 108; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
LTM8052AIY#PBF
SWITCHING REGULATOR; Temperature Grade: AUTOMOTIVE; No. of Terminals: 81; Package Code: BGA; Package Shape: RECTANGULAR; Surface Mount: YES;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved