Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
Median Price
$5.290
Lifecycle Status
Suppliers In-Stock
14
In-Stock Inventory
1k+
Chip1Stop
1+ parts
$2.480
100+ parts
-
1k+ parts
10k+ parts
Farnell
$3.850
$3.100
$2.340
$2.230
Arrow
$4.365
$3.372
$3.149
$3.096
Newark
$2.510
$2.320
DigiKey
$5.770
$3.708
$3.336
$3.244
Mouser Electronics
$3.700
$3.330
Analog Devices Inc
$6.610
$3.135
$2.612
Element14
$6.890
$5.530
$4.220
$4.000
Verical
$2.410
Digiode
$2.356
Nova Conductors
$3.489
Anansix
Vyrian
Prism Electronics
Corohmni
$1.672
Ampacity Inc.
$2.050
Semicontronic
$1.999
$1.988
One Stop Electronics
Corphita
$2.232
Advanced Electronics
$2.360
$2.242
Parana Technologies
$2.470
$2.297
IDEA Electronic Components Group
$2.656
$2.523
MARBEL Systems
$3.215
Argo Parts USA
Texas Native Microelectronics
$3.695
$3.547
$3.436
$3.252
Component Stockers USA
$3.920
$4.050
DigiPath Technology Company
$4.143
$3.978
Kenton Components
$4.434
$3.902
Vigor
$4.550
Continental Prestige Electronics
$4.940
$3.630
$2.600
Aztec Data Supply Inc.
$5.970
Qasali Group International
$9.976
$9.278
$8.779
Perfect Parts
Comparators LTC6752IMS8-2#PBF attributes and parameters. Explore more Comparators devices from Linear Technology
Amplifier Type:
Technology:
Total Functions:
Sub-Category:
Output Type:
Maximum Input Offset Voltage:
Peak Bias Current:
Nominal Supply Voltage:
Maximum Supply Voltage:
Lowest Operating Temperature:
Maximum Operating Temperature:
Reflow Peak Time Limit:
Peak Reflow Temperature:
Nominal Response Time:
Length:
Width:
Maximum Seated Height:
Total Terminals:
Terminal Pitch:
Terminal Position:
Terminal Form:
Terminal Finish:
Package Body Material:
Surface Mount:
Moisture Sensitivity Level (MSL):
Temperature Grade:
JESD-30 Code:
JESD-609 Code:
Package Code:
Package Shape:
Package Type:
LTC6752IMS8-2#PBF Amplifiers trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
PCN Design/Specification - Mult Dev Mark Chg 3/Feb/2020
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
1N4148
Microsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
1N4148W-T
Micro Commercial Components
1N4148W-T by Micro Commercial Components is a single rectifier diode with a max reverse recovery time of 0.004 us. It operates b/w -55 to 150 °C and has a max output current of 0.15 A. Ideal for applications requiring fast switching speeds in small outline packages.
LM107H/883
Linear Technology
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Technology: BIPOLAR;
LM358N
Silicon Group
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Drain-Source On Resistance: 3 ohm; Minimum DS Breakdown Voltage: 50 V; Terminal Form: GULL WING;
LL4148
Bytesonic Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SS14
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2277UA
Texas Instruments
OPA2277UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 100 uV and micropower consumption of 1.65 mA. Ideal for industrial applications, it offers high common mode rejection ratio of 140 dB and unity gain bandwidth of 1000 kHz in a small outline package.
2N2222A
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Unitrode
Dc Components
STM32H743BIT6
STMicroelectronics
STM32H743BIT6 by STMicroelectronics is a 32-bit microcontroller with Cortex-M7 CPU, 208 terminals, and 1085440 bytes of RAM. It features 2 DAC channels, 32 ADC channels, and operates at a max clock frequency of 48 MHz. Ideal for industrial applications requiring high-speed processing and extensive peripheral connectivity.
1N4148WS
Rugao Dachang Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
BSS123LT1G
Onsemi
BSS123LT1G by Onsemi is a N-CHANNEL FET with 100V DS breakdown voltage, 0.17A drain current, and 6 ohm on resistance. Ideal for switching applications, it operates in enhancement mode with a max power dissipation of 0.225W. It comes in a small outline package with gull wing terminals and can withstand temperatures from -55 to 150°C.
DS18B20Z+T&R
Analog Devices
DS18B20Z+T&R by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, offering ±0.5°C accuracy. The sensor comes in a plastic package suitable for surface mount applications, with a max supply voltage of 5.5V and min of 3V.
OPA2277UA/2K5
Burr-Brown Corporation
OPERATIONAL AMPLIFIER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
Tesla Elektronicke Soucastky
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; No. of Terminals: 3;
2N7002
Small Signal Field-Effect Transistors; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Transistor Application: SWITCHING; Maximum Drain Current (ID): .34 A; Package Style (Meter): SMALL OUTLINE;
LM311M
LM311M by Texas Instruments is a comparator with a max input offset voltage of 10000 uV and max average bias current of 0.3 uA. It operates on a nominal voltage of 15 V and has an open-collector output type. Widely used in commercial applications, it offers fast response time of 200 ns and operates b/w temperatures of 0 to 70 °C.
TLV1701QDBVRQ1
TLV1701QDBVRQ1 by Texas Instruments is a comparator with 6300uV max input offset voltage, 0.02uA max average bias current, and 40V max supply voltage. Ideal for automotive applications due to AEC-Q100 screening level, -40 to 125 °C operating temp range, and open-collector output type.
LM293AD-T
NXP Semiconductors
LM293AD-T by NXP Semiconductors is a comparator with 2 functions, featuring a max input offset voltage of 4000 uV and a max average bias current of 0.4 uA. It operates at temperatures ranging from -25 to 85 °C and has an open-collector output type. Ideal for applications requiring precise voltage comparisons in compact designs.
LM211D
LM211D by Texas Instruments is a comparator with a max input offset voltage of 4000 uV and max average bias current of 0.15 uA. It operates at temperatures ranging from -40 to 85 °C and has an open-collector output type. Ideal for industrial applications requiring fast response times, it comes in a small outline package with dual terminals.
MCP6562T-E/MS
Microchip Technology
MCP6562T-E/MS by Microchip Technology is a dual-function comparator with 10000 uV max input offset voltage and 0.005 uA max average bias current. It operates at -40 to 125 °C, suitable for automotive applications. The small outline package has 8 terminals, push-pull output type, and response time of 56 ns.
MIC6270YM5-TR
MIC6270YM5-TR by Microchip Tech is a comparator with 9000uV max input offset voltage, 0.4uA max average bias current, and 600ns nominal response time. Ideal for industrial applications requiring open-collector output type, it operates b/w -40 to 85 °C with a supply voltage of 5V.
LM339DBR
LM339DBR by Texas Instruments is a comparator with 4 functions, operating at a supply voltage of 5V. It features a max input offset voltage of 5000uV and a max bias current of 0.4uA. This device is commonly used in applications requiring open-collector output type for precise comparisons.
LM339M
Intersil
COMPARATOR; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 14; Package Code: SOP; Package Shape: RECTANGULAR;
LMV393IDGKR
LMV393IDGKR by Texas Instruments is a dual comparator with a max input offset voltage of 9000 uV and a max average bias current of 0.4 uA. It operates at temperatures ranging from -40 to 125 °C and is ideal for automotive applications due to its small outline, thin profile package style.
LT6703HVCS5-2#TRMPBF
LT6703HVCS5-2#TRMPBF by Analog Devices is a 5-terminal comparator with a supply voltage of 5V and open-collector output. It operates in industrial temperatures (-40 to 85°C) with low bias current (0.01uA). Ideal for applications requiring precise voltage comparisons in compact designs.
LM393NG
LM393NG by Onsemi is a comparator with 2 functions, operating at 5V. It has a max input offset voltage of 9000uV and a max average bias current of 0.4uA. Ideal for applications requiring precise voltage comparisons in commercial temperature environments.
LM393DT
LM393DT by STMicroelectronics is a comparator with 2 functions, operating at 5V. It has a max input offset voltage of 9000uV and bias current of 0.4uA. Widely used in applications requiring open-collector output type, such as sensor interfacing and voltage level detection.
LTC6752HS5#TRMPBF
LTC6752HS5#TRMPBF by Analog Devices is a CMOS comparator with 8500uV max input offset voltage, 2.1uA max average bias current, and 2.9ns nominal response time. Ideal for automotive applications due to its small outline package and low power consumption of 5.9mA at a supply voltage of 2.5V.
LM311N
General Electric Solid State
COMPARATOR; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
LM2901PWRE4
LM2901PWRE4 by Texas Instruments is a comparator with 4 functions, operating at -40 to 125 °C. It has a max supply voltage of 36V and consumes 2.5mA. With a response time of 1300ns, it is ideal for automotive applications due to its small size and low bias current of 0.25uA.
LM397MF/NOPB
LM397MF/NOPB by Texas Instruments is a comparator with a max input offset voltage of 10000 uV and max average bias current of 0.4 uA. It operates at a nominal voltage of 5V, suitable for industrial applications requiring open-collector output type and fast response time of 940000 ns. This surface-mount device in small outline package is ideal for temperature-sensitive environments with operating range from -40 to 85 °C.
LMV762MMX/NOPB
National Semiconductor
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: TSSOP; Package Shape: SQUARE;
LM211DRG4
LM211DRG4 by Texas Instruments is a comparator with a max input offset voltage of 4000 uV and max average bias current of 0.15 uA. It operates at temperatures ranging from -40 to 85 °C and has a response time of 115 ns. Ideal for industrial applications requiring precise voltage comparisons in compact designs.
LT1716IS5#TRPBF
LT1716IS5#TRPBF by Analog Devices is a comparator with 2400uV max input offset voltage and 1400uA max average bias current. It operates in industrial temperature range, has open-collector output type, and is suitable for applications requiring precise voltage comparisons.
LM339N
COMPARATOR; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 14; Package Code: DIP; Package Shape: RECTANGULAR;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC6752ISC6-1#TRMPBF
LTC6752ISC6-1#TRMPBF by Analog Devices is a CMOS comparator with 8500uV max input offset voltage, 2.1uA max average bias current, and 2.5V nominal voltage. It is ideal for industrial applications requiring fast response time of 2.9ns in a small outline package with dual terminals and matte tin finish.
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
LTC6752HSC6-4#TRMPBF
LTC6752HSC6-4#TRMPBF by Analog Devices is a CMOS comparator with 8500uV max input offset voltage, 2.1uA max average bias current, and 2.9ns nominal response time. Ideal for automotive applications due to its small outline package and low power consumption of 2.5mA at a supply voltage of 2.5V.
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: VSSOP; Package Shape: RECTANGULAR;
LTC6752IS5#TRMPBF
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
LTC6752IS5#TRMPBF by Analog Devices is a CMOS COMPARATOR with 8500uV Max Input Offset Voltage, 2.1uA Max Average Bias Current, and 2.9ns Nominal Response Time. It is used in industrial applications for precise voltage comparisons due to its fast response time and low bias current.
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: GULL WING; No. of Terminals: 5; Package Code: VSSOP; Package Shape: RECTANGULAR;
LTC6752HSC6-1#TRMPBF
LTC6752HSC6-1#TRMPBF by Analog Devices is a CMOS comparator with a max input offset voltage of 8500 uV and a max average bias current of 2.1 uA. It is used in automotive applications due to its small size, low power consumption, and high temperature tolerance.
LTC6752IUD-3#PBF
COMPARATOR; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE;
LTC6752IUD-3#PBF by Analog Devices is a CMOS comparator with 8500uV max input offset voltage, 2.1uA max average bias current, and 2.5V nominal voltage. Ideal for industrial applications requiring fast response time of 2.9ns in a compact square package with surface mount capability.
LTC6752ISC6-4#TRMPBF
LTC6752ISC6-4#TRMPBF by Analog Devices is a CMOS comparator with 8500uV max input offset voltage, 2.1uA max average bias current, and 2.9ns nominal response time. Ideal for industrial applications requiring precise signal comparison in compact designs due to its small outline package style and low power consumption of 2.5mA at a supply voltage of 2.5V.
LTC6752IMS8-2#PBF
LTC6752HMS8-2#PBF
LTC6752HMS8-2#PBF by Analog Devices is a CMOS comparator with 8500uV max input offset voltage, 2.1uA max average bias current, and 2.9ns nominal response time. Ideal for automotive applications due to its small outline package style and low power consumption of 2.5mA at a supply voltage of 2.5V.
LTC6752HUD-3#PBF
COMPARATOR; Temperature Grade: AUTOMOTIVE; Terminal Form: NO LEAD; No. of Terminals: 12; Package Code: HVQCCN; Package Shape: SQUARE;
LTC6752HUD-3#PBF by Analog Devices is a CMOS COMPARATOR with 8500uV Max Input Offset Voltage, 2.1uA Max Average Bias Current, and 2.9ns Nominal Response Time. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and low power consumption of 2.5mA at max supply voltage of 5.5V.
LTC6752IMS8-2#TRPBF
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved