Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Median Price
$7.670
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
Farnell
1+ parts
$6.080
100+ parts
$4.550
1k+ parts
$3.450
10k+ parts
-
Analog Devices Inc
$3.987
$3.670
DigiKey
$8.470
$5.572
$5.050
Mouser Electronics
$8.720
$5.730
$5.190
Newark
$5.740
$5.330
Element14
$11.110
$8.310
$6.300
Verical
$3.100
Arrow
$4.069
$3.971
Chip1Stop
$4.914
Nova Conductors
$4.350
Digiode
$5.776
Vyrian
Semtec, LLC
Anansix
Chip Stock
Semicontronic
$2.630
$2.564
$2.551
Ampacity Inc.
Aranea Global
$4.263
$4.092
Argo Parts USA
Aztec Data Supply Inc.
$4.640
Corphita
$5.472
Continental Prestige Electronics
$6.220
$3.700
Vigor
$6.400
Parana Technologies
$8.092
$7.525
IDEA Electronic Components Group
$8.701
$8.266
MARBEL Systems
$8.832
Texas Native Microelectronics
$10.152
$9.746
$9.441
$8.934
Kenton Components
$12.182
$10.721
DigiPath Technology Company
$13.574
$13.031
Corohmni
$21.353
Qasali Group International
$27.410
$25.492
$24.121
Lixinc
RC Electronics
Perfect Parts
Multiplexers & Switches LTC1391CS#PBF attributes and parameters. Explore more Multiplexers & Switches devices from Linear Technology
Additional Features:
Other IC type:
JESD-30 Code:
JESD-609 Code:
Length:
Moisture Sensitivity Level (MSL):
Nominal Negative Supply Voltage (Vsup):
No. of Channels:
No. of Functions:
No. of Terminals:
Nominal Off-state Isolation:
Nominal On-state Resistance Match:
Maximum On-state Resistance (Ron):
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Power Supplies (V):
Qualification:
Maximum Seated Height:
Sub-Category:
Maximum Supply Current (Isup):
Nominal Supply Voltage (Vsup):
Surface Mount:
Maximum Switch-off Time:
Maximum Switch-on Time:
Switching (V):
Technology:
Temperature Grade:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Width (mm):
LTC1391CS#PBF Other Function Semiconductors trade compliance attributes, and parameters.
HTS
8542.39.00.01
SB
8542.39.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
2N2222A
Good-ark Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): 1.8 W; Maximum Collector Current (IC): .8 A;
BAV99
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
MBRS130LT3G
Rochester Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: J BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Sinyork
RECTIFIER DIODE; Surface Mount: NO; Maximum Non Repetitive Peak Forward Current: .5 A; Maximum Output Current: .15 A; Maximum Repetitive Peak Reverse Voltage: 100 V; No. of Phases: 1;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
Wuxi Xuyang Electronic
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Teledyne Components
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Operating Temperature: 150 Cel; No. of Terminals: 3;
Weitronic Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148WS
Meritek Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
SMBJ18CA
Diodes Incorporated
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
L7805CV
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; Maximum Input Voltage Absolute: 35 V; Maximum Voltage Tolerance: 5 %; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Output Voltage-1: 5 V;
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BAV99LT1G
Onsemi
BAV99LT1G by Onsemi is a series connected diode with 2 elements in a small outline package. It has a max reverse recovery time of 0.006 us and can handle up to 100V repetitive peak reverse voltage. Ideal for rectification applications, this diode operates b/w -65°C to 150°C temperature range.
1N4148WT-7
1N4148WT-7 by Diodes Inc. is a fast recovery rectifier diode with a max reverse recovery time of 0.004 us and a max forward voltage of 1.25 V. It has a package style of small outline, making it suitable for surface mount applications where high-speed switching is required at temperatures ranging from -65 to 150 °C.
STMicroelectronics
L7805CV by STMicroelectronics is a fixed positive single output standard regulator with an output voltage of 5V and max current of 1.5A. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
AMS1117-3.3
Advanced Monolithic Systems
AMS1117-3.3 by Advanced Monolithic Systems is a fixed positive single output LDO regulator with 1A max output current, 3% voltage tolerance, and 1.3V dropout voltage. Ideal for applications requiring stable 3.3V supply in compact designs due to its small outline package and excellent load regulation of 0.025%.
MBRS140T3G
MBRS140T3G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.6V and max output current of 1A. It operates b/w -65°C to 125°C, making it suitable for various applications requiring high-speed switching and low power loss in a small outline package style. The diode's matte tin terminal finish and dual position terminals enhance its performance in surface mount configurations.
MMBT2222ALT1G
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
SN74LVC1G3157DBVR
SN74LVC1G3157DBVR by Texas Instruments is a SPDT switch with 6 terminals, operating at temperatures from -40 to 85 °C. It has a max on-state resistance of 30 ohm and a switching time of 14 ns, suitable for industrial applications requiring common output switching functions.
CD4052BM96G4
CD4052BM96G4 by Texas Instruments is a CMOS differential multiplexer with 2 channels, 16 terminals, and a nominal bandwidth of 25 kHz. It operates at temperatures ranging from -55 to 125 °C and has a max supply current of 3 mA. Ideal for military-grade applications requiring high-speed signal switching in compact spaces.
PCA9548ABS,118
NXP Semiconductors
NXP Semiconductors' PCA9548ABS,118 is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates b/w -40°C to 85°C, has separate outputs, and a max seated height of 1mm. Ideal for applications requiring signal routing in compact spaces due to its small form factor and low power consumption.
ADG452BRZ
Analog Devices
ADG452BRZ by Analog Devices is a 4-function multiplexer with a max on-state resistance of 12 ohm and switching type of break-before-make. It operates at industrial temperature grade, with a supply voltage range from -20V to +20V. Ideal for applications requiring precise signal routing in harsh environments.
ADG1604BCPZ-REEL7
ADG1604BCPZ-REEL7 by Analog Devices is a CMOS multiplexer with 16 terminals, 4 channels, and on-state resistance of 1.2 ohm. It operates at -40 to 125 °C and has a max supply voltage of 8 V. Ideal for automotive applications due to its low power consumption (0.36 mA) and compact size (4x4 mm).
ADG1604BRUZ-REEL7
ADG1604BRUZ-REEL7 by Analog Devices is a 14-terminal CMOS multiplexer with 4 channels. It operates at a supply voltage range of 3.3V to 8V and offers a max on-state resistance of 1.2 ohm, making it ideal for automotive applications requiring precise signal switching in compact spaces.
FSA4157AL6X
Fairchild Semiconductor
SPDT; Temperature Grade: INDUSTRIAL; No. of Terminals: 6; Package Code: VSON; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4053BCM
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD74HC4052M96
CD74HC4052M96 by Texas Instruments is a CMOS differential multiplexer with 2 channels. It operates at -55 to 125 °C and has a max on-state resistance of 270 ohm. With a nominal bandwidth of 200 kHz, it is ideal for military-grade applications requiring high-speed signal switching.
7705201EX
Maxim Integrated
SINGLE-ENDED MULTIPLEXER; Temperature Grade: MILITARY; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
HEF4051BT,653
Nexperia
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
74HC4052D
NXP Semiconductors' 74HC4052D is a CMOS differential multiplexer with 4 channels. It operates at -40 to 125 °C and has a max on-state resistance of 195 ohm. With a small outline package, it's ideal for automotive applications requiring fast switching times and high isolation levels.
TS5A3159DCKRE4
TS5A3159DCKRE4 by Texas Instruments is a SPDT multiplexer/switch with a package size of 2mm x 1.25mm. It operates at a supply voltage range of 1.65V to 5.5V and has a max on-state resistance of 3.2 ohm, making it suitable for industrial applications requiring high-speed switching and low power consumption.
PCA9548AD,112
PCA9548AD,112 by NXP Semiconductors is an 8-channel multiplexer with a supply voltage range of 2.3V to 5.5V and on-state resistance of 55 ohm. It operates in temperatures from -40°C to 85°C, features separate outputs, and has a fast switch-on/off time of 0.3 ns making it ideal for applications requiring precise signal routing in compact designs.
CD4051BEE4
CD4051BEE4 by Texas Instruments is a 16-terminal CMOS multiplexer with 5V nominal voltage. It features 1050 ohm max on-state resistance and 720 ns switch-on/off time. Ideal for military-grade applications requiring high bandwidth and low signal current consumption.
ADG507AKRZ
ADG507AKRZ by Analog Devices is a CMOS differential multiplexer with 8 channels. It has a max on-state resistance of 450 ohm and operates at an industrial temperature grade of -40 to 85 °C. This multiplexer is commonly used in applications requiring signal switching and isolation.
MAX339CSE+
DIFFERENTIAL MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
CD4053BE
Rca Solid State
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
ADG508AKRZ-REEL7
ADG508AKRZ-REEL7 by Analog Devices is a CMOS multiplexer with 8 channels, 450 ohm max Ron, and 300 ns switch-on/off time. It operates in industrial temperature range (-40 to 85 °C) and is ideal for signal routing applications requiring high isolation (68 dB) and low on-state resistance match (22.5 ohm).
FSA8008AUMX
FSA8008AUMX by Onsemi is a 10-terminal audio/video switch with power supplies of 2.5/4.4V, operating temperature range of -40 to 85°C, and peak reflow temperature of 260°C. This chip carrier package is surface mountable and ideal for industrial applications requiring high-quality signal switching capabilities.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LTC1380IGN#PBF
SINGLE-ENDED MULTIPLEXER; Temperature Grade: INDUSTRIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
Linear Technology
LTC1391CS#PBF
LTC1391IGN#PBF
LTC1391IGN#PBF by Analog Devices is an 8-channel single-ended multiplexer with a max on-state resistance of 75 ohm and switch-on time of 400 ns. It operates in industrial temperature range (-40 to 85 °C) and has a nominal voltage of ±5 V. Ideal for applications requiring fast switching and low on-state resistance in compact designs.
LTC1391CS#TRPBF
LTC1380IGN#TRPBF
LTC1391CS
LTC1390CS#PBF
LTC1380IS#PBF
LTC1380CS#TRPBF
LTC1380IS#TR
LTC1380IS#TRPBF
LTC1380CGN#TRPBF
SINGLE-ENDED MULTIPLEXER; Temperature Grade: COMMERCIAL; No. of Terminals: 16; Package Code: SSOP; Package Shape: RECTANGULAR; Surface Mount: YES;
LTC1380IGN
LTC1391CS#TR
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved