Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 3.5 %;
Median Price
$11.584
Lifecycle Status
Suppliers In-Stock
22
In-Stock Inventory
1k+
Verical
1+ parts
$5.090
100+ parts
-
1k+ parts
10k+ parts
Chip1Stop
$8.970
$5.510
$5.140
Farnell
$9.360
$5.500
$5.380
Arrow
$10.858
$6.670
Analog Devices Inc
$12.310
$6.336
$5.570
Mouser Electronics
$12.730
$8.570
$7.980
Newark
$8.000
Element14
$16.830
$12.600
$9.560
Nova Conductors
$6.315
Digiode
$8.522
Forefront Electronics and Design
$17.150
Chip Stock
Dynamic Solutions
Anansix
Vyrian
LIBRA Elektronik GmbH
Bas Electronics GmbH & Co. KG
EPE Components Inc.
Bristol Electronics
Carlin Systems, Inc.
Sensible Micro Corp
Prism Electronics
Parana Technologies
$2.203
$2.049
IDEA Electronic Components Group
$2.369
$2.251
MARBEL Systems
$2.908
Texas Native Microelectronics
$3.343
$3.209
$3.109
$2.942
DigiPath Technology Company
$3.696
$3.548
Kenton Components
$4.012
$3.530
Aztec Data Supply Inc.
$4.390
Corohmni
$5.595
Advanced Electronics
$5.763
$5.475
Netroflash
Semicontronic
$7.620
$7.430
$7.391
Corphita
$8.073
Qasali Group International
$9.026
$8.394
$7.943
Continental Prestige Electronics
$9.090
$6.800
$5.160
Microchip USA
$29.736
Lixinc
Authorized Procurement Solutions
Perfect Parts
Argo Parts USA
Robosynatics
Lucentia Tech
$3.764
Glotronic Ltd.
Futuretech Components
S.R.D Solutions
GreenTree Electronics
Speed Components Ltd (Excess)
Adjustable Regulators - Positive Single Output LDO LT1764EQ#PBF attributes and parameters. Explore more Adjustable Regulators - Positive Single Output LDO devices from Linear Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Peak Reflow Temperature (C):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Time At Peak Reflow Temperature (s):
Maximum Voltage Tolerance:
Width:
LT1764EQ#PBF Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
1N4148
Renesas Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
NE555D
Philips Semiconductors
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Dionics-usa
NPN; Configuration: SINGLE; Surface Mount: YES; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Silicon Standard
NC7WZ07P6X
Fairchild Semiconductor
BUFFER; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 6; Package Code: TSSOP; Package Shape: RECTANGULAR;
BSS138W-7-F
Multicomp Pro
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Transistor Element Material: SILICON; No. of Elements: 1;
LM358AN
Signetics
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Kec
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR; Transistor Application: SWITCHING; Package Body Material: PLASTIC/EPOXY;
Surge Components
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .6 A; No. of Terminals: 3;
LM317T
Bay Linear
Other Regulators; No. of Terminals: 3; No. of Outputs: 1; Surface Mount: NO; Maximum Load Regulation (%): 1.5 %; Operating Temperature (TJ-Min): 0 Cel;
USB2514BI-AEZG
Microchip Technology
USB2514BI-AEZG by Microchip is a BUS CONTROLLER IC with 36 terminals, operating at 3.3V, supporting I2C, SMBUS, and USB buses. It has a clock frequency of up to 24MHz and can withstand industrial temperatures from -40°C to 85°C. This chip carrier package is surface mountable and suitable for various applications requiring USB connectivity.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Semicoa
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Microsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LL4148
Daco Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Electronic Devices
Motorola
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Collector-Base Capacitance: 8 pF;
SS14
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Surface Mount: YES; Technology: SCHOTTKY; No. of Phases: 1; Config: SINGLE; Maximum Operating Temperature: 125 Cel;
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
Itt Semiconductor
LP2951DR
Texas Instruments
LP2951DR by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 29V and dropout voltage of 0.6V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LT3080IT#PBF
Analog Devices
LT3080IT#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max dropout voltage of 0.5V and operating temperature range from -40°C to 125°C. It has a max output voltage of 36V, making it suitable for various applications requiring precise voltage regulation in electronic circuits.
LT1085CM#PBF
LT1085CM#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 3A and a max dropout voltage of 1.5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LT3045IMSE-1#TRPBF
LT3045IMSE-1#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It is designed for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
LT1965IDD#TRPBF
Analog Devices' LT1965IDD#TRPBF is an adjustable positive single output LDO regulator with a max output current of 1.1A and dropout voltage of 0.49V, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature range from -40 to 125°C makes it versatile for various electronic devices needing stable power supply. Package style includes small outline, heat sink/slug, and very thin profile for efficient thermal management in space-constrained designs.
LT3041ADE#PBF
LT3041ADE#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 1A and a max dropout voltage of 0.48V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LD39100PURY
STMicroelectronics
STMicroelectronics LD39100PURY is an adjustable positive single output LDO regulator with a max output current of 1A and dropout voltage of 0.2V. It operates in a temperature range from -40 to 125°C, making it suitable for automotive applications meeting AEC-Q100 standards. The package style is small outline, heat sink/slug, very thin profile, with no-lead terminals in a square shape.
LT1963AEFE#PBF
Linear Technology
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 16; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Adjustability: ADJUSTABLE;
MIC5209YM-TR
MIC5209YM-TR by Microchip Technology is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.6V. It is commonly used in applications requiring stable voltage regulation, such as power supplies for electronic devices.
TPS79901DDCRG4
TPS79901DDCRG4 by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.2A and a min input voltage of 2.7V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS7A9001DSKT
TPS7A9001DSKT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 0.5 A and a max dropout voltage of 0.2 V, making it ideal for low-power applications. With a wide operating temperature range from -40 to 125°C, this regulator in a small outline package is suitable for various electronic devices requiring stable voltage regulation.
LM2941CSX/NOPB
LM2941CSX/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a dropout voltage of 1V. It operates b/w 0-125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, surface mountable, with a terminal pitch of 1.7mm.
LT1129CQ#TRPBF
LT1129CQ#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.7A and a max dropout voltage of 0.7V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
PTPS7A3901DSC
PTPS7A3901DSC by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 30V and max dropout voltage of 0.5V. It operates in a temperature range from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS7A4201DGNT
TPS7A4201DGNT by Texas Instruments is an adjustable positive single output LDO regulator with a max output voltage of 26V and a max dropout voltage of 1.3V, suitable for applications requiring precise voltage regulation in a compact form factor. Operating temperature ranges from -40°C to 125°C, making it ideal for various electronic devices where stable power supply is crucial. With surface mount capability and small outline package style, this regulator offers flexibility and reliability in diverse circuit designs.
ADM7151ACPZ-04-R7
ADM7151ACPZ-04-R7 by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 5.1V and max current of 0.8A. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
TPS74601PBDRVT
TPS74601PBDRVT by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1A and a max input voltage of 6V. It has a small outline package style, suitable for applications requiring precise voltage regulation in compact spaces. Operating temperature ranges from -40 to 125°C make it versatile for various electronic devices.
LT1761ES5-BYP
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Minimum Output Voltage-1: 1.22 V; Terminal Pitch: .95 mm;
LM1086CS-ADJ/NOPB
LM1086CS-ADJ/NOPB by Texas Instruments is an adjustable positive single output LDO regulator with a max output current of 1.5A and a dropout voltage of 1.3V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3085EDCB#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: HVSON; Terminal Form: NO LEAD; Package Equivalence Code: SOLCC6,.12,20; Operating Temperature (TJ-Max): 125 Cel;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT1763CS8#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; No. of Outputs: 1; Surface Mount: YES;
LT1763CS8#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5 A and a max dropout voltage of 0.45 V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT1761ES5-BYP#TRMPBF
LT1761ES5-BYP#TRMPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 20V and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Package Shape: RECTANGULAR; Package Body Material: PLASTIC/EPOXY;
LT1761ES5-BYP#TRPBF
LT1761ES5-BYP#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 20V and dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Moisture Sensitivity Level (MSL): 1;
LT1763CS8#TRPBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; No. of Functions: 1;
LT1763CS8#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT1761ES5-BYP#PBF
LT1761ES5-BYP#PBF by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 20V and a dropout voltage of 0.45V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Terminal Position: DUAL;
LT1764AEQ#TRPBF
LT1764AEQ#TRPBF by Analog Devices is an adjustable positive single output LDO regulator with a max output current of 3A and a max dropout voltage of 0.66V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Minimum Output Voltage-1: 1.21 V; Maximum Output Voltage-1: 20 V;
LT1764AEQ#PBF
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Output Voltage-1: 20 V; Package Shape: RECTANGULAR;
Analog Devices' LT1764AEQ#PBF is an adjustable positive single output LDO regulator with a max output current of 3A and a dropout voltage of 0.66V. Ideal for applications requiring precise voltage regulation in a compact package, operating at temperatures ranging from -40°C to 125°C.
LT1761ES5-BYP#TRM
Analog Devices' LT1761ES5-BYP#TRM is an adjustable positive single output LDO regulator with a max output current of 0.1A and a max dropout voltage of 0.45V. It operates in temperatures ranging from -40 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; No. of Outputs: 1; Qualification Status: Not Qualified;
LT1761ES5-BYP#TR
Analog Devices' LT1761ES5-BYP#TR is an adjustable positive single output LDO regulator with a max output voltage of 20V and dropout voltage of 0.45V. Ideal for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices or IoT sensors.
ADJUSTABLE POSITIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: VSSOP; Terminal Form: GULL WING; Adjustability: ADJUSTABLE; Terminal Position: DUAL;
LT1761ES5-BYP by Analog Devices is an adjustable positive single output LDO regulator with a max output voltage of 20V and a dropout voltage of 0.45V. This surface-mount device operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved