Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; JESD-30 Code: R-PSSO-G5; Moisture Sensitivity Level (MSL): 1; Maximum Seated Height: 4.775 mm;
Median Price
-
Lifecycle Status
Suppliers In-Stock
4
In-Stock Inventory
1k+
Digiode
1+ parts
100+ parts
1k+ parts
10k+ parts
Anansix
Vyrian
Nova Conductors
Parana Technologies
$5.045
$4.692
IDEA Electronic Components Group
$5.425
$5.154
One Stop Electronics
$7.500
MARBEL Systems
$7.988
DigiPath Technology Company
$8.463
$8.124
AZTECH Wire
$8.637
Texas Native Microelectronics
$9.182
$8.815
$8.539
$8.080
Ampacity Inc.
$9.500
Kenton Components
$11.018
$9.696
Semicontronic
$14.500
$14.138
$14.065
Qasali Group International
$24.791
$23.056
$21.816
Continental Prestige Electronics
Corphita
Corohmni
Argo Parts USA
Bastille Electronics
Adjustable Regulators - Negative Single Output LDO LT1185CQ#TR attributes and parameters. Explore more Adjustable Regulators - Negative Single Output LDO devices from Linear Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input-Output Voltage Differential:
Minimum Input-Output Voltage Differential:
JESD-30 Code:
JESD-609 Code:
Length:
Maximum Line Regulation (%/V):
Maximum Load Regulation (%):
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Package Body Material:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Packing Method:
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Width:
LT1185CQ#TR Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
2N7002
Vishay Siliconix
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; No. of Elements: 1; Terminal Form: GULL WING; Qualification: Not Qualified;
ATMEGA328P-AU
Atmel
MICROCONTROLLER, RISC; Temperature Grade: INDUSTRIAL; Terminal Form: GULL WING; No. of Terminals: 32; Package Code: TQFP; Package Shape: SQUARE;
1N4148
Onsemi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
SMBJ18CA
Daco Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Silicon Standard
ULN2803A
Texas Instruments
ULN2803A by Texas Instruments is a peripheral driver with 8 functions. It has a max supply voltage of 3V and can operate in temperatures ranging from -40 to 85°C. This IC is commonly used as a buffer or inverter based peripheral driver for various applications.
Bytesonic Electronics
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
Shandong Yiguang Electronic Joint Stock
OPA2227UA
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
1554216002
Molex
WIRE AND CABLE;
FDC5614P
TAIZHOU ELECTRONICS CO LTD
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 1.92 W; Maximum Operating Temperature: 150 Cel; Package Body Material: PLASTIC/EPOXY;
E8WSDC12-32.768KTR
Abracon's E8WSDC12-32.768KTR crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring precise timing at 0.032768 MHz, such as IoT devices and communication systems.
2N2222A
General Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138-TP
Micro Commercial Components
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
SMMBT3904LT1G
SMMBT3904LT1G by Onsemi is a NPN BJT with 3 terminals, 0.3W power dissipation, and 40V max collector-emitter voltage. Ideal for small outline applications requiring a transistor with hFE of at least 30, it operates up to 150°C and has a transition frequency of 300MHz.
BSS138
Yangzhou Yangjie Electronics
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JESD-30 Code: R-PDSO-G3; Maximum Time At Peak Reflow Temperature (s): NOT SPECIFIED; Operating Mode: ENHANCEMENT MODE;
CRCW080510R0FKEA
Vishay Intertechnology
Vishay Intertechnology's CRCW080510R0FKEA is a fixed resistor with 10 ohm resistance, 1% tolerance, and 0.125 W power dissipation. Ideal for surface mount applications in automotive electronics due to its AEC-Q200 reference standard and operating voltage of 150 V. Operating temperature range from -55 to 155 °C ensures reliability in various environments.
BSS84PH6327XTSA2
Infineon Technologies
BSS84PH6327XTSA2 by Infineon is a P-CHANNEL FET with 60V DS breakdown voltage, ideal for switching applications. It features a single configuration with built-in diode and operates in enhancement mode. With a max drain current of 0.17A and on-resistance of 8 ohm, it offers reliable performance in small outline packages.
NDT2955
National Semiconductor
P-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): 3 W; JESD-609 Code: e0; Field Effect Transistor Technology: METAL-OXIDE SEMICONDUCTOR;
LT1175IT#TR
Analog Devices
LT1175IT#TR by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.7V. It operates in temperatures ranging from -40 °C to 125°C, making it suitable for various applications requiring stable voltage regulation in challenging environments.
V62/21616-01XE
V62/21616-01XE by Texas Instruments is an adjustable negative single output LDO regulator with a total dose of 30k Rad(Si). It features a max dropout voltage of 0.5V and can operate in temperatures ranging from -55 to 125°C. This chip carrier package is suitable for applications requiring precise voltage regulation in radiation-prone environments.
LT3015IDD#TRPBF
LT3015IDD#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 1.5A and a max dropout voltage of 0.5V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces. The package style is small outline with a very thin profile, ideal for surface mount designs where space is limited.
LT3015EQ#PBF
Linear Technology
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Line Regulation (%/V): .018; Maximum Output Current-1: 1.5 A; Nominal Dropout Voltage-1: .41 V;
LT1964IS5-BYP#TRMPBF
Analog Devices' LT1964IS5-BYP#TRMPBF is an Adjustable Negative Single Output LDO Regulator with a max output voltage of 20V and dropout voltage of 0.49V. This regulator, in a small outline package, is ideal for applications requiring precise voltage regulation in compact spaces. Operating temperature range from -40 to 125°C makes it suitable for various electronic devices.
LT3093IDD#TRPBF
LT3093IDD#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output voltage of 19.5V and a max output current of 0.2A. It operates in temperatures ranging from -40 °C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LM2991T-1
LM2991T-1 by Texas Instruments is an adjustable negative single output LDO regulator with a max output voltage of 25V and max output current of 1A. It features a low dropout voltage of 1V, making it suitable for applications requiring stable power supply in temperature range from -40°C to 125°C. The package style is flange mount with through-hole terminals, ideal for various electronic devices.
UCC284DP-ADJ
UCC284DP-ADJ by Texas Instruments is an adjustable negative single output LDO regulator with a max output voltage of 15V and a dropout voltage of 0.5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LT1185CQ#PBF
LT1185CQ#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and a max dropout voltage of 1V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
TPS7A3001DRBT
TPS7A3001DRBT by Texas Instruments is an adjustable negative single output LDO regulator with a max output voltage of 33V and a max dropout voltage of 0.6V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT3091ET7#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 7; Package Code: ZIP; Terminal Form: THROUGH-HOLE; Package Equivalence Code: ZIP7,.15,.2,67TB; Package Shape: RECTANGULAR;
5962F0250301VXC
Intersil
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 28; Package Code: DFP; Terminal Form: FLAT; Terminal Pitch: 1.27 mm; Nominal Dropout Voltage-1: 1 V;
LT3094EDD#PBF
Analog Devices' LT3094EDD#PBF is an adjustable negative single output LDO regulator with a max output current of 0.5A and dropout voltage of 0.41V. Ideal for applications requiring precise load regulation, it operates in temperatures ranging from -40 to 125°C, making it suitable for various electronic devices.
UCC284SDR-ADJEP
UCC284SDR-ADJEP by Texas Instruments is an adjustable negative single output LDO regulator with a max output voltage of 15V and max dropout voltage of 0.5V. It operates in temperatures ranging from -55°C to 150°C, making it suitable for various applications requiring precise voltage regulation in compact electronic devices.
LT3093EDD#TRPBF
LT3093EDD#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.2A and max output voltage of 19.5V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
RHFL7913KPA2
STMicroelectronics
RHFL7913KPA2 by STMicroelectronics is an adjustable negative LDO regulator with a max output of 9.5V and current up to 3A. It operates in extreme temps from -55 °C to 150°C, featuring a dropout voltage of just 0.8V. Ideal for high-radiation environments, it ensures reliable performance in critical applications.
LT1964ES5-SD#TRM
LT1964ES5-SD#TRM by Analog Devices is an Adjustable Negative Single Output LDO Regulator with a max output voltage of 20V and dropout voltage of 0.49V. Ideal for applications requiring precise voltage regulation in compact spaces, such as portable electronic devices.
LM2991MWC
LM2991MWC by Texas Instruments is an adjustable negative single output LDO regulator with a max output voltage of 25V and a dropout voltage of 1V. Operating at up to 150°C, it offers a max output current of 1A, making it ideal for applications requiring precise voltage regulation in harsh environments.
LT3094HMSE#PBF
LT3094HMSE#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max dropout voltage of 0.41V and a max input-output voltage differential of 20V. It is commonly used in applications requiring precise voltage regulation, such as power management systems in electronic devices.
LT3015IMSE#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 12; Package Code: HTSSOP; Terminal Form: GULL WING; Maximum Seated Height: 1.1 mm; No. of Functions: 1;
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LT1175CS8#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input-Output Voltage Differential: 20 V; Maximum Operating Temperature: 70 Cel;
LT1175CS8#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.7V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs.
LT1175IS8#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Operating Temperature (TJ-Max): 125 Cel; Surface Mount: YES;
LT1175IS8#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.5 A and a max dropout voltage of 0.7 V. It operates in temperatures ranging from -40 to 125 °C and is suitable for applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Moisture Sensitivity Level (MSL): 1; Peak Reflow Temperature (C): 260; Nominal Dropout Voltage-1: .67 V;
LT1175CQ#PBF
LT1175CQ#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.7V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; JESD-30 Code: R-PSSO-G5; JESD-609 Code: e3;
LT1175CS8#TRPBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Peak Reflow Temperature (C): 260; Maximum Load Regulation (%): .35 %;
Analog Devices' LT1175CS8#TRPBF is an adjustable negative single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.7V. This surface-mount device, suitable for applications requiring precise voltage regulation, operates within a temperature range of 0 to 125°C.
LT1175IS8#TRPBF
LT1175IS8#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 0.5A and a max dropout voltage of 0.7V. It operates in temperatures ranging from -40°C to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Minimum Input-Output Voltage Differential: 1 V; Nominal Dropout Voltage-1: .5 V;
LT1185CQ#TRPBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Output Current-1: 3 A; Maximum Dropout Voltage-1: 1 V; Surface Mount: YES;
LT1185CQ#TRPBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and a max dropout voltage of 1V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring precise voltage regulation in compact spaces.
LT1185CT#PBF
LT1185CT#PBF by Analog Devices is an adjustable negative single output LDO regulator with a max output current of 3A and a max dropout voltage of 1V. It operates in temperatures ranging from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in electronic circuits.
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: ZIP; Terminal Form: GULL WING; Terminal Pitch: 1.7 mm; Terminal Finish: MATTE TIN OVER NICKEL;
LT1185CQ
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Input-Output Voltage Differential: 20 V; Terminal Finish: TIN LEAD OVER NICKEL; Package Style (Meter): SMALL OUTLINE;
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Load Regulation (%): .3 %; Package Equivalence Code: SMSIP5H,.54,67TB; Operating Temperature (TJ-Min): 0 Cel;
LT1185IT#PBF
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; JESD-30 Code: R-PSFM-G5; Minimum Output Voltage-1: 2.5 V; No. of Functions: 1;
ADJUSTABLE NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: ZIP; Terminal Form: GULL WING; Package Body Material: PLASTIC/EPOXY; Nominal Dropout Voltage-1: .67 V;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved