Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: DIP; Terminal Form: THROUGH-HOLE; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
Median Price
$4.560
Lifecycle Status
Suppliers In-Stock
6
In-Stock Inventory
1k+
Bristol Electronics
1+ parts
100+ parts
$2.280
1k+ parts
-
10k+ parts
Vyrian
Digiode
Anansix
Prism Electronics
Semtec, LLC
MARBEL Systems
$3.022
Texas Native Microelectronics
$3.474
$3.335
$3.231
$3.057
Parana Technologies
$4.049
$3.766
Kenton Components
$4.169
$3.669
IDEA Electronic Components Group
$4.354
$4.136
DigiPath Technology Company
$6.792
$6.521
Qasali Group International
$9.380
$8.723
$8.254
Semicontronic
$9.500
$9.262
$9.215
AZTECH Wire
$14.382
One Stop Electronics
$14.500
Corphita
Corohmni
Assy Fe
Fixed Regulators - Negative Single Output LDO LT1175CN8-5 attributes and parameters. Explore more Fixed Regulators - Negative Single Output LDO devices from Linear Technology
Adjustability:
Maximum Dropout Voltage-1:
Nominal Dropout Voltage-1:
Maximum Input Voltage Absolute:
JESD-30 Code:
JESD-609 Code:
Maximum Load Regulation:
Moisture Sensitivity Level (MSL):
No. of Functions:
No. of Outputs:
No. of Terminals:
Operating Temperature (TJ-Max):
Operating Temperature (TJ-Min):
Maximum Operating Temperature:
Minimum Operating Temperature:
Maximum Output Current-1:
Maximum Output Voltage-1:
Minimum Output Voltage-1:
Nominal Output Voltage-1:
Package Body Material:
Package Code:
Package Equivalence Code:
Package Shape:
Package Style (Meter):
Qualification Status:
Regulator Type:
Maximum Seated Height:
Sub-Category:
Surface Mount:
Technology:
Terminal Finish:
Terminal Form:
Terminal Pitch:
Terminal Position:
Maximum Voltage Tolerance:
Width:
LT1175CN8-5 Regulators trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8542.39.00.01
SB
8542.39.00.00
U.S. In July 2016, Analog Devices agreed to buy Linear Technology for 14.8 billion dollars. This acquisition was finalized on March 10, 2017. The Linear name survives as the "Power by Linear" brand that is used to market the combined power management portfolios of Linear Technology and Analog Devices.
SMBJ18CA
Multicomp Pro
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Diode Element Material: SILICON; Technology: AVALANCHE; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V;
2N2222A
International Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
1N4148
NXP Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
STMicroelectronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
261
Micronetics
Other Interface ICs; Temperature Grade: MILITARY; Terminal Form: FLAT; No. of Terminals: 14; Package Code: DFP; Package Shape: SQUARE;
LL4148
Lite-on Semiconductor
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
2N7002
Diotec Semiconductor Ag
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 10; Terminal Finish: MATTE TIN;
Tt Electronics Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Collector Current (IC): .8 A; JESD-30 Code: O-MBCY-W3;
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LM107H/883C
General Electric Solid State
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Wideband: NO;
1N4148WSF-7
Diodes Incorporated
1N4148WSF-7 by Diodes Inc. is a single silicon rectifier diode with max output current of 0.25A and max reverse voltage of 100V. It operates b/w -55 to 150°C, has a small outline package style, and is suitable for surface mount applications in various electronic circuits.
Changzhou Starsea Electronics
Boca Semiconductor
PIC18F4550-I/ML
Microchip Technology
The Microchip Technology PIC18F4550-I/ML is an 8-bit microcontroller with a max clock frequency of 48 MHz. It features 13-Ch 10-Bit ADC channels and USB connectivity, making it ideal for industrial applications requiring high-speed data processing and analog-to-digital conversion. With low power mode and flash ROM programmability, this chip offers efficient performance in compact designs.
Digitron Semiconductors
First Components International
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Operating Temperature: 200 Cel; Config: SINGLE; No. of Elements: 1;
08055C104KAT4A
KYOCERA AVX
08055C104KAT4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, rated for 50V. With X7R temperature characteristics and -55 to 125 °C operating range, it's ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic circuits.
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358MX
Onsemi
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
TPS72325DBVT
Texas Instruments
TPS72325DBVT by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 2.5V and max output current of 0.2A. It operates in an extended temperature range from -40°C to 125°C, making it suitable for various applications requiring stable voltage regulation in compact designs. The package style is small outline, low profile, shrink pitch, ideal for space-constrained PCB layouts.
LT3015EQ-5#PBF
Analog Devices
LT3015EQ-5#PBF by Analog Devices is a fixed negative single output LDO regulator with a nominal output voltage of 5V and max output current of 1.5A. Operating temperature ranges from 0 to 125°C, making it suitable for various applications requiring stable voltage regulation in compact spaces. The package style is small outline, ideal for surface mount designs where space efficiency is crucial.
LT1175CQ-5#PBF
Linear Technology
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Package Code: TO-263; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
5962-9570901MMA
Infineon Technologies
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 26 V; Maximum Voltage Tolerance: 5 %;
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 5; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 33 V; Maximum Voltage Tolerance: 2 %; Package Equivalence Code: SMSIP5H,.54,67TB;
LT1175MPS8-5#TRPBF
Analog Devices' LT1175MPS8-5#TRPBF is a fixed negative single output LDO regulator with a 5V nominal output voltage and 0.7V max dropout voltage. This surface-mount device operates in temperatures ranging from -55°C to 125°C, making it suitable for various applications requiring stable power supply solutions. With a compact rectangular package style and dual terminal position, it offers ease of integration into electronic circuits while delivering up to 0.5A of max output current.
ADP7183ACPZN1.2-R7
ADP7183ACPZN1.2-R7 by Analog Devices is a Fixed Negative Single Output LDO Regulator with 0.22V max dropout voltage, 1.2V nominal output voltage, and 0.3A max output current. It is ideal for applications requiring stable power supply in compact electronic devices due to its small outline package style and low dropout voltage.
UCC384DPTR-5G4
UCC384DPTR-5G4 by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 5V and max output current of 0.5A. It operates in temperatures ranging from -55 to 150°C, making it suitable for various applications requiring stable voltage regulation in compact electronic devices.
LT3015EMSE-12#TRPBF
Analog Devices' LT3015EMSE-12#TRPBF is a 12V fixed negative single output LDO regulator with 1.5A max output current and 0.5V dropout voltage. Ideal for applications requiring stable power supply in compact spaces, such as portable electronics or automotive systems. Package style: small outline, heat sink/slug, thin profile, shrink pitch.
RP117K211D-TR
Nisshinbo Micro Devices
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 6; Package Code: VSON; Terminal Form: NO LEAD; Maximum Input Voltage Absolute: .3 V; Maximum Voltage Tolerance: 5 %;
LT3015IDD-5#PBF
Analog Devices' LT3015IDD-5#PBF is a fixed negative single output LDO regulator with a 5V nominal output voltage and 1.5A max output current. Operating temperature ranges from -40 to 125°C, making it suitable for various applications requiring stable power supply in compact spaces. The package style includes small outline, heat sink/slug, and very thin profile features for efficient surface mount installation.
LT1175IQ-5#TRPBF
LT1175IQ-5#TRPBF by Analog Devices is a fixed negative single output LDO regulator with 0.7V dropout voltage, 5V nominal output, and 0.5A max output current. Ideal for applications requiring stable 5V power supply in compact designs with surface mount capability and operating temperature range of -40 to 85 °C.
LT3015EDD-2.5#TRPBF
LT3015EDD-2.5#TRPBF by Analog Devices is a fixed negative single output LDO regulator with a nominal output voltage of 2.5V and max output current of 1.5A. Operating temperature ranges from 0 to 125 °C, making it suitable for various applications requiring stable voltage regulation in compact spaces like consumer electronics and industrial equipment.
LT1175MPQ-5#TR
LT1175MPQ-5#TR by Analog Devices is a Fixed Negative Single Output LDO Regulator with 5V Nominal Output Voltage, 0.7V Max Dropout Voltage, and 0.5A Max Output Current. Ideal for applications requiring stable voltage regulation in compact spaces with operating temperatures ranging from -55 °C to 125°C.
LT3015IDD-15#TRPBF
Analog Devices' LT3015IDD-15#TRPBF is a fixed negative single output LDO regulator with 1.5A max output current and 15V nominal output voltage. Operating temperature ranges from -40 to 125 °C, making it suitable for various applications in electronics requiring stable power supply. The package style is small outline with very thin profile, ideal for space-constrained designs.
LT1175IS8-5#TR
FIXED NEGATIVE SINGLE OUTPUT LDO REGULATOR; No. of Terminals: 8; Package Code: SOP; Terminal Form: GULL WING; Maximum Input Voltage Absolute: 20 V; Maximum Voltage Tolerance: 2.5 %;
UCC284-5DP
UCC284-5DP by Texas Instruments is a fixed negative single output LDO regulator with a max dropout voltage of 0.5V, operating temperature range from -40 to 85°C, and max output current of 0.5A. It is ideal for applications requiring stable 5V output voltage with a small outline package suitable for surface mount technology.
LT3015MPMSE-12#PBF
Analog Devices' LT3015MPMSE-12#PBF is a fixed negative single output LDO regulator with a nominal output voltage of 12V and max output current of 1.5A. It operates in temperatures ranging from -55 to 125 °C, making it suitable for various applications requiring stable power supply solutions in compact spaces. The package style includes small outline, heat sink/slug, thin profile, and shrink pitch features for versatile mounting options.
LT3015EMSE-3#TRPBF
LT3015EMSE-3#TRPBF by Analog Devices is a fixed negative single output LDO regulator with 1.5A max output current, 0.5V dropout voltage, and 3% voltage tolerance. Ideal for applications requiring stable 3V output voltage in compact designs with surface mount capability and operating temperature range of 0 to 125 °C.
LM2990T-5.2
LM2990T-5.2 by Texas Instruments is a fixed negative single output LDO regulator with a nominal output voltage of 5.2V and max output current of 1A. It has a low dropout voltage of 1V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The device comes in a through-hole package style with tin lead terminal finish, ideal for various electronic circuits that demand precise voltage regulation.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved