Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
AFSX3-00100200-15-10P by L-3 Narda-miteq is a COAXIAL RF amplifier with 36 dB gain. It operates from 100 MHz to 2 GHz, offering a low VSWR of 2. Ideal for wideband low-power applications in RF & microwave systems.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
AZTECH Wire
$7.276
Aranea Global
A VSWR of 2 indicates good impedance matching, which helps in maximizing power transfer efficiency and minimizing signal loss, making this amplifier suitable for high performance applications.
Coaxial construction provides good shielding against electromagnetic interference, ensuring stable and reliable RF or microwave signal transmission with minimal losses.
Being a wideband amplifier allows for versatility in terms of frequency coverage, while being low power helps in minimizing energy consumption and heat generation, making it efficient for various applications.
With a high gain of 36 dB, this amplifier can significantly boost the strength of the input signal, providing ample output power for reliable signal transmission over distance or through obstacles.
The ability to operate at frequencies as low as 100 MHz makes this amplifier suitable for a wide range of RF and microwave applications, from data communication to radar systems.
With a high maximum operating frequency of 2000 MHz, this amplifier can handle a wide range of RF and microwave signals, making it versatile for various frequency bands and applications.
RF & Microwave Amplifiers AFSX3-00100200-15-10P attributes and parameters. Explore more RF & Microwave Amplifiers devices from L-3 Narda-miteq
Additional Features:
Construction:
Gain:
Maximum Operating Frequency:
Minimum Operating Frequency:
RF or Microwave Device Type:
Maximum Voltage Standing Wave Ratio:
Know Narda-MITEQ – Your partner for RF/Microwave and SATCOM solutions Our deep technical expertise, fueled by innovation and grounded in 70 years of experience is at the heart of what we do at Narda-MITEQ. Our customers rely on us to help them meet the challenges of their next-gen military and commercial applications with our broad portfolio of RF/microwave, spaceborne and SATCOM solutions. Narda-MITEQ designs and manufactures an extensive range of standard active/passive components, subsystems and IMAs, as well as custom solutions to meet the unique requirements of today’s high reliability applications and tomorrow’s connectivity challenges. Narda-MITEQ, part of the Narda Holdings family of companies, delivers solutions renowned for durability, reliability and performance to address the specific requirements found on land, sea, air and the harsh environment of space. Key Narda-MITEQ offerings: Active/passive components and subsystems, including Amplifiers, Mixers, Oscillators/Synthesizers, Couplers, Power Dividers, Fiber Optics, PIN Diode Control products and SATCOM solutions.
CRCW06031K00FKEAHP
Vishay Intertechnology
Vishay Intertechnology's CRCW06031K00FKEAHP is a fixed resistor with 1000 ohm resistance, 1% tolerance, and 0.33 W power dissipation. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance and operating voltage of 75 V.
SMBJ18CA
International Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Maximum Repetitive Peak Reverse Voltage: 18 V; Polarity: BIDIRECTIONAL;
2N2222A
Cobham Plc
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Collector Current (IC): .8 A; Minimum DC Current Gain (hFE): 100; Maximum Turn Off Time (toff): 300 ns;
LM107H
Linear Technology
LM107H by Linear Technology is an Operational Amplifier with a max input offset voltage of 3000uV, common mode reject ratio of 96dB, and min voltage gain of 50000. It is used in military applications due to its MILITARY temperature grade and BIPOLAR technology for precise signal processing in harsh environments.
1N4148WS
Sangdest Microelectronics (Nanjing)
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
OPA2227UA
Texas Instruments
OPA2227UA by Texas Instruments is a dual operational amplifier with low-offset voltage of 200 uV and bias current of 0.01 uA. It operates at temperatures ranging from -40 to 85 °C, making it suitable for industrial applications requiring precise signal amplification. With a unity gain bandwidth of 8000 kHz, this op amp is ideal for high-frequency circuit designs.
DS18B20Z+
Analog Devices
DS18B20Z+ by Analog Devices is a 12-bit temperature sensor with 1-Wire interface. It operates b/w -55 to 125°C, with ±0.5°C accuracy. Suitable for applications requiring digital output and surface mounting feature.
SS14
Panjit International
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIT6
STMicroelectronics
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
MBRA340T3G
Onsemi
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
2N7002
Inter F E T
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Drain-Source On Resistance: 7.5 ohm; Maximum Drain Current (Abs) (ID): .115 A;
CRCW040210K0FKED
Vishay Intertechnology's CRCW040210K0FKED is a fixed resistor with 10000 ohm resistance, 1% tolerance, and 0.063 W power dissipation. Ideal for surface mount applications in electronics due to its compact SMT package style and high operating temperature range of -55 to 155 °C.
C1210C104K5RACTU
KEMET Corporation
KEMET C1210C104K5RACTU is a ceramic capacitor with 0.1uF capacitance, rated for 50V. It has X7R temperature characteristics and ±10% tolerance, suitable for surface mount applications in a wide temperature range from -55°C to 125°C. Its compact rectangular package makes it ideal for various electronic devices.
ULN2803A
Motorola
NPN; Configuration: 8 BANKS, DARLINGTON WITH BUILT-IN DIODE AND RESISTOR; Surface Mount: NO; Maximum Collector Current (IC): .5 A; Terminal Position: DUAL; JESD-30 Code: R-PDIP-T18;
IRLML6402TRPBF
Infineon Technologies
IRLML6402TRPBF by Infineon is a P-CHANNEL FET for SWITCHING applications. It features a 20V DS Breakdown Voltage, 22A IDM, and 0.065 ohm RDS(on). With a small outline package and matte tin finish, it operates in temperatures from -55 to 150 °C.
Changzhou Starsea Electronics
M24308/2-1F
Bel Fuse
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; Dielectric Withstanding Voltage (V): 1750VAC; No. of Connectors: ONE; Mixed Contacts: NO;
LL4148
Yangzhou Yangjie Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
RC0805FR-0710KL
Yageo
Yageo's RC0805FR-0710KL is a 10000 ohm SMT fixed resistor with 1% tolerance and 0.125 W power dissipation. Ideal for applications requiring resistance to operate b/w -55°C to 155°C, such as in automotive electronics or industrial control systems. Features metal glaze/thick film technology and matte tin finish with nickel barrier.
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
HMC8325-SX
Analog Devices' HMC8325-SX is a PHEMT RF amplifier with 22 terminals, operating from 71-86 GHz. It offers a gain of 19.5 dB and requires a 3V power supply, drawing a max current of 50 mA. Ideal for wideband low-power applications in RF and microwave systems.
MAX2691EWS+T
MAX2691EWS+T by Analog Devices is a BICMOS RF amplifier with 13.1 dB gain, operating at 1.8/3.3V. It is a wide band low power device suitable for surface mount applications in RF & Microwave systems, offering a characteristic impedance of 50 ohm and temperature range from -40 to 85°C.
QPA2611TR7
Qorvo
Qorvo's QPA2611TR7 is a GAN technology RF amplifier with 35.5 dB gain, operating from 8-12 GHz. It offers 21 dBm CW input power handling and VSWR of 3, suitable for wideband high-power applications in RF & microwave systems. The component has 24 terminals, surface-mountable on plastic/epoxy package body.
CMD264P3
Qorvo's CMD264P3 is a wide band low power RF amplifier with 18 dB gain, operating from 6-18 GHz. It can handle up to 20 dBm CW input power and operates b/w -40°C to +85°C. Ideal for RF & microwave applications requiring high performance in a compact component.
HMC752LC4
Hittite Microwave
WIDE BAND LOW POWER; Maximum Operating Frequency: 28000 MHz; Characteristic Impedance: 50 ohm; JESD-609 Code: e4; Maximum Input Power (CW): -5 dBm; Maximum Operating Temperature: 85 Cel;
TQP7M9103
Qorvo's TQP7M9103 is a wide band medium power RF amplifier with 16.6 dB gain, operating from 400 MHz to 4000 MHz. It has a max input power of 30 dBm and VSWR of 10, suitable for surface mount applications in RF & microwave systems. With a compact plastic/epoxy package, it operates b/w -40°C to 85°C temperature range.
HMC8410LP2FETR
Analog Devices' HMC8410LP2FETR is a wide band low power RF amplifier with 13 dB gain and 50 ohm impedance. It operates from 10 MHz to 10 GHz, handling up to 20 dBm CW input power. Ideal for RF and microwave applications requiring high performance in temperatures ranging from -40°C to 85°C.
HMC963LC4
Analog Devices' HMC963LC4 is a wide band low power RF amplifier with 16.5 dB gain, operating from 6-26.5 GHz. It can handle up to 0 dBm CW input power, ideal for RF & microwave applications requiring high frequency amplification in temperatures ranging from -40°C to 85°C.
BGA715N7E6327XTSA2
Infineon's BGA715N7E6327XTSA2 is a RF amplifier with 20dB gain, operating from 1550-1615MHz. It can handle up to 10dBm input power and has a characteristic impedance of 50 ohm. Ideal for narrowband low-power applications in temperatures ranging from -40°C to 85°C.
BGU8103
NXP Semiconductors
The NXP Semiconductors BGU8103 is a narrow band low power RF amplifier with a gain of 14.5 dB. It operates at frequencies b/w 1559 MHz and 1610 MHz, making it suitable for applications in the RF and microwave field. Its compact surface mount package and low power consumption of 1.6 mA make it an ideal choice for various wireless communication systems.
RDA1005LTR7
Qorvo's RDA1005LTR7 is a wide band low power RF amplifier with 15.5 dB gain, operating from 50 MHz to 4000 MHz. It has a max input power of 20 dBm and operates on a 5V power supply. Ideal for applications requiring surface mount components in RF & microwave systems.
MGA-72543-TR1
Broadcom
Broadcom's MGA-72543-TR1 is a GAAS technology RF amplifier with 9.2 dB gain, operating from 100 MHz to 6 GHz. It has a max input power of 20 dBm and VSWR of 2.1, suitable for wideband low-power applications in RF & microwave systems. The component features a plastic/epoxy package body, operates at temperatures from -40°C to 85°C, and requires a 3V power supply.
TGA2578
TGA2578 by Qorvo is a GAN technology RF amplifier with 27 dB gain, operating from 2-6 GHz. It has a max input power of 25 dBm and VSWR of 10, suitable for wideband high-power applications. With a compact design and surface mount feature, it can handle temperatures up to 275°C.
MGA-61563-BLKG
Broadcom's MGA-61563-BLKG is a GAAS RF amplifier with 6.9dB gain, operating from 100MHz to 6GHz. It has a max input power of 18dBm and VSWR of 2, suitable for wideband low-power applications in RF & microwave systems. With a compact plastic/epoxy package and surface mounting feature, it offers high performance with 48mA supply current at 3/5V.
HMC460LC5
Analog Devices' HMC460LC5 is a wide band low power RF amplifier with 10 dB gain and 50 ohm impedance. It operates from 0 to 20,000 MHz, handling up to 18 dBm CW input power. This ceramic-packaged component is ideal for RF and microwave applications requiring high performance in a compact form factor.
AG302-86G
Wj Communications
WIDE BAND LOW POWER; Mounting Feature: SURFACE MOUNT; No. of Terminals: 4; Package Body Material: PLASTIC/EPOXY; Technology: GAAS; No. of Functions: 1;
XF1001-SC-0G00
Mimix Broadband
WIDE BAND MEDIUM POWER; Maximum Operating Temperature: 85 Cel; Terminal Finish: Matte Tin (Sn); Minimum Operating Frequency: 0 MHz; Gain: 10.1 dB; Maximum Input Power (CW): 24 dBm;
HMC636ST89
HMC636ST89 by Analog Devices is a GAAS technology RF amplifier with 5dB gain, operating from 200MHz to 4GHz. It has a max input power of 16dBm and operates on a 5V power supply. Ideal for wideband low-power applications, this component is designed for surface mounting in RF and microwave systems.
HMC506LP4ETR
NARROW BAND LOW POWER; JESD-609 Code: e3; Terminal Finish: MATTE TIN;
TQL9062
The Qorvo TQL9062 is a wide band medium power RF amplifier with 15 dB gain, operating from 500 MHz to 6 GHz. It has a max input power of 33 dBm and VSWR of 1.29, suitable for various RF applications. Constructed with E-PHEMT technology, it features a plastic/epoxy package body and operates b/w -40°C to 105°C.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
AFSX3-00100400-22-10P
L-3 Narda-miteq
WIDE BAND LOW POWER; Minimum Operating Frequency: 100 MHz; Maximum Voltage Standing Wave Ratio: 2; Gain: 28 dB; Additional Features: LOW NOISE; Construction: COAXIAL;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved