Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX TCJB107M006R0045 is a TANTALUM CAPACITOR with 100uF capacitance, 6.3V URdc, and 0.1 Tan Delta. Ideal for applications requiring high ripple current (800mA) and low leakage current (0.06mA), such as power supplies and filtering circuits in electronics.
Median Price
$0.422
Lifecycle Status
Suppliers In-Stock
25
In-Stock Inventory
1k+
Adafruit Industries
1+ parts
$0.456
100+ parts
$0.433
1k+ parts
10k+ parts
-
DigiKey
$1.000
$0.451
$0.354
$0.304
Newark
$1.020
$0.496
Chip1Stop
$0.266
Farnell
$0.391
$0.350
Element14
$44.380
$26.720
TTI
$0.277
Future Electronics
$0.265
TTI Europe
$0.213
Verical
$0.452
Arrow
Nova Conductors
$0.332
TME
$1.060
$0.485
$0.336
$0.323
Vyrian
IBS Electronics
$0.421
NAC Semi
$0.464
Chip Stock
Bristol Electronics
Inventory MP
Ashlea Components Ltd
ComSIT Distribution GmbH
Martec Srl
Sensible Micro Corp
Lakeland Logistics Inc
Prism Electronics
Semicontronic
$0.181
$0.176
Aztec Data Supply Inc.
$0.235
Argo Parts USA
$0.322
Continental Prestige Electronics
$0.368
$0.284
$0.234
Advanced Electronics
Corohmni
$0.573
Perfect Parts
GreenTree Electronics
Authorized Procurement Solutions
Eastek
Netroflash
$0.325
$0.315
$0.309
Formix International (Excess)
Tantalum solid polymer provides high stability and reliability, making this capacitor a durable choice.
Low tan delta indicates minimal dielectric losses, ensuring efficient performance.
Low leakage current means minimal power loss and better efficiency.
High ripple current rating allows for reliable operation in applications with fluctuating currents.
With a high operating temperature, this capacitor can withstand demanding environmental conditions.
High capacitance value enables this capacitor to store and release large amounts of charge when needed.
Suitable for applications requiring a low DC voltage tolerance and stable performance.
Fixed Capacitors TCJB107M006R0045 attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TCJB107M006R0045 Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
SMBJ18CA
Rectron
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
2N2222A
Solid State Devices
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
M39029/58-360
Fct Electronic
CONNECTOR ACCESSORY; IEC Conformity: NO; Alternate Contact Sources: MILITARY; MIL Conformity: YES; Contact Gender: MALE; MIL-Connector Accessory Name: CONTACT;
MBR0520LT1G
Onsemi
MBR0520LT1G by Onsemi is a Schottky rectifier diode with a max forward voltage of 0.385V and output current of 0.5A. It operates b/w -65°C to 125°C, has a peak reflow temperature of 260°C, and a repetitive peak reverse voltage of 20V. This diode is ideal for applications requiring high-speed switching in compact electronic devices.
2N7002DWH6327XTSA1
Infineon Technologies
2N7002DWH6327XTSA1 by Infineon: N-CHANNEL FET with 60V DS Breakdown Voltage, 0.3A ID, and 3ohm RDS. Ideal for SWITCHING applications in small outline packages with GULL WING terminals.
Silicon Standard
INA826AIDGKR
Texas Instruments
INA826AIDGKR by Texas Instruments is an instrumentation amplifier with 150uV max input offset voltage, 0.095uA max average bias current, and 1MHz nominal bandwidth. Ideal for automotive applications due to its -40 to 125 °C operating temperature range and high common mode rejection ratio of 120dB.
STM32F405RGT6
STMicroelectronics
STM32F405RGT6 by STMicroelectronics is a 32-bit microcontroller with 2/3.3V power supplies, 16 external interrupts, and 196608 RAM bytes. Ideal for industrial applications, it features CAN(2), I2C(3), SPI(3) connectivity options and operates at a max clock frequency of 26 MHz. With low power mode and DMA support, it offers versatile performance in compact dimensions.
LM555CN
National Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR; Surface Mount: NO;
EU2B-YS2J03C
Idec
ROTARY SWITCH;
ULN2803ADWR
ULN2803ADWR by Texas Instruments is a peripheral driver with 8 functions, open-collector output characteristics, and built-in transient protections. It operates b/w -40 to 85°C, has a max supply voltage of 3V, and is ideal for buffer or inverter-based applications requiring sink current flow direction.
1N4148
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Taiwan Semiconductor
STM32H753BIT6
STM32H753BIT6 by STMicroelectronics is a 32-bit microcontroller with 208 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and extensive peripherals for industrial applications like CAN, Ethernet, and USB connectivity. With a wide temperature range of -40 to +85 °C, it's ideal for demanding environments requiring high-speed processing capabilities.
LL4148
Semtech Electronics
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
STM32H753IIT6
STM32H753IIT6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs and 2-Ch 12-Bit DACs, suitable for industrial applications requiring high-speed data processing and connectivity via CAN, ETHERNET, USB, and more.
Pulse Electronics
NXP Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Collector Current (IC): .8 A; Maximum Operating Temperature: 150 Cel;
LM317TG
ADJUSTABLE POSITIVE SINGLE OUTPUT STANDARD REGULATOR; No. of Terminals: 3; Terminal Form: THROUGH-HOLE; Minimum Input-Output Voltage Differential: 3 V; Qualification Status: Not Qualified; No. of Functions: 1;
C1005X5R0J106M050BC
TDK
The TDK C1005X5R0J106M050BC is a ceramic capacitor with 10uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
T491B105K035AT
KEMET Corporation
KEMET T491B105K035AT is a 1uF, 35V Tantalum Capacitor with low Tan Delta of 0.04 and high Ripple Current of 52mA. Ideal for applications requiring compact SMT capacitors with high reliability in temperatures ranging from -55 to 125°C.
C0805C225K4RACTU
KEMET C0805C225K4RACTU is a ceramic capacitor with 2.2uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.
M39006/250220
Cornell Dubilier Electronics
M39006/250220 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 30V URdc, and 0.42 Tan Delta. It is ideal for applications requiring high ripple current handling capabilities and operates b/w -55 to 125 °C. This polarized capacitor conforms to MIL-C-39006/25 standards and features a tubular package with wire terminals for through-hole mounting.
C0805C101J5GACTU
The KEMET Corporation C0805C101J5GACTU is a ceramic capacitor with 0.0001uF capacitance and 50V rated DC voltage. Featuring a temperature coefficient of 30ppm/°C, it operates b/w -55 to 125 °C. Ideal for surface mount applications in various electronic circuits due to its compact size and high reliability.
BFC238350562
Vishay Intertechnology
Vishay Intertechnology BFC238350562 is a film capacitor with capacitance of 0.0056uF, rated DC voltage of 1600V, and rated AC voltage of 550V. It is used in applications requiring high temperature tolerance up to 105°C, such as power supplies and industrial equipment due to its polypropylene dielectric material and through-hole mounting feature.
TMK325ABJ476MM-P
Taiyo Yuden
Taiyo Yuden's TMK325ABJ476MM-P is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for SMT applications due to its compact rectangular package design and wraparound terminals.
C0603C104K4RACAUTO
KEMET C0603C104K4RACAUTO is a ceramic capacitor with 0.1uF capacitance, 16V URdc, X7R temp code. Ideal for automotive applications due to AEC-Q200 standard compliance and -55 to 125 °C operating range. SMT package style, compact size of 1.6x.8x.8mm make it suitable for surface mount designs.
0402YC104KAT2A
KYOCERA AVX
0402YC104KAT2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.1uF, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for applications requiring compact, high-performance capacitors in electronic circuits.
C0603C100J5GACTU
KEMET C0603C100J5GACTU is a ceramic capacitor with 0.00001uF capacitance, 50V URdc, and ±5% tolerance. Ideal for SMT applications due to its compact size (1.6mm x 0.8mm x 0.8mm) and C0G temperature coefficient of 30ppm/°C, making it suitable for high-temperature environments up to 125°C.
CK05BX104K
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
TMK325B7226KMHP
Taiyo Yuden's TMK325B7226KMHP is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
CL21C220JBANNNC
Samsung Electro-mechanics
CL21C220JBANNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.000022 uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high precision and stability in various electronic circuits.
M39006/25-0236
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 60 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C3216X5R0J107M160AB
TDK C3216X5R0J107M160AB is a ceramic capacitor with 100uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
GRM32ER61C476KE15L
Murata Manufacturing
GRM32ER61C476KE15L by Murata Manufacturing is a ceramic capacitor with a capacitance of 47 uF and a rated DC voltage of 16 V. It has a temperature coefficient of 15% and can operate in temperatures ranging from -55 to 85 °C. This capacitor is commonly used in surface mount applications.
CL10B105KO8NNNC
CL10B105KO8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 1uF capacitance and 16V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 125°C. Ideal for surface mount applications in electronics requiring stable capacitance under varying temperatures.
M39006/30-0040
Vishay Intertechnology's M39006/30-0040 is a TANTALUM CAPACITOR with 850uF capacitance, 8V URdc, and 0.3 Tan Delta. Ideal for MIL-PRF-39006/30 applications requiring polarized capacitors with -55 to 125 °C operating range and low ESR of 470mohm in tubular package.
CC0402KRX5R6BB105
Yageo
Yageo's CC0402KRX5R6BB105 is a 1uF ceramic capacitor with X5R temperature coefficient, suitable for SMT mounting. It has a 10% tolerance, operates b/w -55 to 85°C, and rated at 10V. Ideal for compact electronic devices requiring stable capacitance in a small form factor.
GRM188R61C475KAAJD
Murata Manufacturing's GRM188R61C475KAAJD is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TCJB226M025R0100E
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJB107M006R0070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
Kyocera
TCJB107M006R0045
TCJB225M035R0200
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJB337M002R0035
KYOCERA AVX's TCJB337M002R0035 is a TANTALUM CAPACITOR with 330uF capacitance, 2.5V URdc, and 0.08 Tan Delta. Ideal for applications requiring low leakage current (0.0825mA), high ripple current (900mA), and operating temperatures from -55 to 105°C.
TCJB476M010R0070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
KYOCERA AVX's TCJB476M010R0070 is a TANTALUM CAPACITOR with 47uF capacitance and 10V rated DC voltage. It has a low Tan Delta of 0.06, making it suitable for applications requiring high performance and stability. With its compact size (3.5mm x 2.8mm x 1.9mm), it can be easily mounted on surfaces for various electronic devices.
TCJB226M016R0150
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJB156M035R0200E
KYOCERA AVX's TCJB156M035R0200E is a TANTALUM CAPACITOR with 15uF capacitance, 35V URdc, and 400mA ripple current. Ideal for SMT applications due to its compact size (3.5x2.8x1.9mm) and low ESR of 200mohm at -55°C to 105°C operating range.
TCJB156M035R0200
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 15 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJB225M035R0200E
TCJB337M002R0045
KYOCERA AVX's TCJB337M002R0045 is a TANTALUM CAPACITOR with 330uF capacitance, 2.5V URdc, and 0.08 Tan Delta. Ideal for applications requiring low leakage current (0.0825mA), high ripple current (800mA), and operating temperatures from -55 to 105°C.
TCJB337M002R0070
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 330 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
TCJB106M035R0200
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 105 Cel; Dielectric Material: TANTALUM (SOLID POLYMER);
KYOCERA AVX's TCJB106M035R0200 is a TANTALUM CAPACITOR with 10uF capacitance, 35V URdc, and 0.06 Tan Delta. Ideal for applications requiring high ripple current (400mA) and low leakage current (0.035mA), such as power supplies and filtering circuits in electronics.
TCJB106M035R0200E
KYOCERA AVX's TCJB106M035R0200E is a TANTALUM CAPACITOR with 10uF capacitance, 35V URdc, and 0.06 Tan Delta. Ideal for applications requiring low leakage current (0.035mA), high ripple current (400mA), and operating temperatures from -55 to 105°C.
TCJB107M006R0040
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved