Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX TAJR475M010RNJ is a 4.7uF Tantalum Capacitor with 10V URdc, -55 to 125 °C operating temp, and 0.06 Tan Delta. Ideal for SMT applications requiring low leakage current (0.0005mA) and high ripple current (31mA).
Median Price
$0.276
Lifecycle Status
Suppliers In-Stock
17
In-Stock Inventory
1k+
Newark
1+ parts
$0.110
100+ parts
1k+ parts
-
10k+ parts
Mouser Electronics
$0.420
$0.167
$0.130
$0.112
DigiKey
$0.122
Element14
$0.469
$0.147
$0.141
$0.134
Farnell
$0.491
$0.217
Verical
$0.111
Avnet
$0.132
TTI
$0.114
Nova Conductors
$0.139
Vyrian
Netsource Technology, Inc.
Semi Source
IBS Electronics
$0.203
PC Components Company LLC
Bristol Electronics
Dan-Mar Components
Atlantic Semiconductor
Ampacity Inc.
$0.074
Semicontronic
$0.072
Continental Prestige Electronics
$0.136
Argo Parts USA
$0.135
Netroflash
Corohmni
$0.185
Aztec Data Supply Inc.
$0.280
Kepictronics
Authorized Procurement Solutions
Assy Fe
Tantalum capacitors offer high capacitance values in a small package size, making them ideal for compact electronic devices.
Low tan delta indicates low dissipation factor, leading to minimal energy loss in the capacitor.
Low leakage current ensures stable and reliable performance of the capacitor over time.
High ripple current rating allows the capacitor to handle fluctuations in current smoothly without affecting performance.
High operating temperature range enables the capacitor to withstand harsh environmental conditions.
Wide temperature range makes the capacitor suitable for use in various applications, including extreme temperature environments.
Moderate capacitance value is suitable for filtering and decoupling applications in electronic circuits.
Adequate rated voltage ensures the capacitor can handle standard voltage levels in electronic circuits.
Fixed Capacitors TAJR475M010RNJ attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TAJR475M010RNJ Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
NSN
5910-01-615-5315, 5910016155315
NIIN
016155315
PCN Part Number - TAJ Series Suffix 08/Dec/2008
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
BAV99
Micro Commercial Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
2N7002
Panjit International
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Maximum Time At Peak Reflow Temperature (s): 40; Minimum DS Breakdown Voltage: 60 V;
BSS138-TP
BSS138-TP by Micro Commercial Components is a N-channel small signal FET with a min DS breakdown voltage of 50V and max drain current of 0.22A. It is commonly used in applications requiring enhancement mode operation, such as power management and switching circuits.
STM32H743IIT6
STMicroelectronics
STM32H743IIT6 by STMicroelectronics is a 32-bit microcontroller with integrated cache and a max supply voltage of 3.6V. It is commonly used in industrial applications due to its wide temperature range (-40°C to 85°C) and various connectivity options (CAN, I2C, UART, USB).
SMBJ18CA
KYOCERA AVX
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
General Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
ERJU06F10R0V
Panasonic
ERJU06F10R0V by Panasonic is an 0805 size SMT fixed resistor with a resistance of 10 ohm and 1% tolerance. It operates b/w -55 to 155 °C, suitable for AEC-Q200 standards in automotive applications due to its high temperature coefficient of 100 ppm/°C. With a max operating voltage of 150 V and power dissipation of 0.125 W, it is ideal for surface mounting type.
EU2B-YS2J03C
Idec
ROTARY SWITCH;
ULN-2803A
Sprague Electric
BUFFER OR INVERTER BASED PERIPHERAL DRIVER; Temperature Grade: OTHER; Terminal Form: THROUGH-HOLE; No. of Terminals: 18; Package Code: DIP; Package Shape: RECTANGULAR;
BSS138NH6327XTSA2
Infineon Technologies
BSS138NH6327XTSA2 by Infineon is a N-CHANNEL FET with 60V DS Breakdown Voltage, ideal for small signal applications. Operating in Enhancement Mode, it has 0.36W Power Dissipation and 3.5 ohm Drain-Source Resistance. With Gull Wing terminals and AEC-Q101 reference standard, it's suitable for automotive electronics due to its high temperature range of -55 to 150 °C.
Central Semiconductor
North American Philips Discrete Products Div
RECTIFIER DIODE; Surface Mount: YES; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Repetitive Peak Reverse Voltage: 70 V; Maximum Reverse Recovery Time: .006 us; Maximum Output Current: .1 A;
2N2222A
Loras Industries
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Eic Semiconductor
Telcom Semiconductor
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Maximum Operating Temperature: 150 Cel; JESD-609 Code: e0;
BSS138
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; No. of Elements: 1; Maximum Drain Current (Abs) (ID): .2 A;
LM358AN
Samsung
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
Onsemi
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Terminal Finish: Matte Tin (Sn) - annealed; Transistor Element Material: SILICON;
MBRA340T3G
MBRA340T3G by Onsemi is a Schottky rectifier diode with 40V reverse test voltage and 3A max output current. Ideal for power applications, it operates b/w -55 to 150°C, features matte tin terminal finish, and comes in a small outline package.
GCJ31CR71H225KA12L
Murata Manufacturing
Murata Manufacturing's GCJ31CR71H225KA12L is a ceramic capacitor with 2.2uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and AEC-Q200 standard compliance. Ideal for surface mount applications in automotive electronics due to its compact size and high reliability.
GRM155R71C104KA88J
Murata Manufacturing's GRM155R71C104KA88J is a ceramic capacitor with capacitance of 0.1uF, rated for 16V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in electronics requiring compact components with high reliability.
M39006/22-0345
KEMET Corporation
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C1608X5R0J226M080AC
TDK
C1608X5R0J226M080AC by TDK is a ceramic capacitor with 22uF capacitance and 6.3V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C, making it ideal for SMT applications requiring compact size and high reliability. With a negative tolerance of 20%, this multi-layer capacitor is suitable for various electronic devices.
CL21B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL21B104KBCNNNC is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it suitable for surface mount applications requiring stable performance in a compact rectangular package.
M39006/30-0040
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 850 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
M39006/25-0072
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
C0603X104K5RACAUTO
C0603X104K5RACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.1 uF and rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate b/w -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
GRM188R61C475KAAJD
Murata Manufacturing's GRM188R61C475KAAJD is a ceramic capacitor with 4.7uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic devices.
202R18W102KV4E
Johanson Dielectrics
202R18W102KV4E by Johanson Dielectrics is a ceramic capacitor with 0.001 uF capacitance and 2000 V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for SMT applications due to its rectangular package shape and surface mounting feature.
TMK107B7105KA-T
Taiyo Yuden
TMK107B7105KA-T by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 25V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C. Ideal for SMT applications due to its compact rectangular package design and wraparound terminals.
06033D104KAT2A
06033D104KAT2A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85°C. Ideal for surface mount applications requiring compact size and high reliability in electronic circuits.
M39006/30-0038
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 430 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
TAJA106K016RNJV
TAJA106K016RNJV by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 16V URdc. It has a compact SMT package style, -55 to 125 °C operating temperature range, and 3000 mohm ESR. Ideal for applications requiring high reliability and stable capacitance in harsh environments.
EEEFP1V221AP
Panasonic EEEFP1V221AP is a 220uF Aluminum Electrolytic Capacitor with 35V URdc. It features 0.12 Tan Delta, 552.5mA Ripple Current, and -55 to 105 °C operating temperature range. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance and compact cylindrical package design.
C0603C106M9PACTU
KEMET C0603C106M9PACTU is a 10uF ceramic capacitor with 6.3V URdc, X5R temp characteristics, and 20% tolerance. Ideal for SMT applications in electronics due to compact 1.6x0.8mm size and -55 to 85°C operating range. Suitable for various devices requiring stable capacitance under changing conditions.
CGA5L1X7R1H106K160AE
TDK's CGA5L1X7R1H106K160AE is a ceramic capacitor with 10uF capacitance, rated at 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 standard compliance.
GRM32ER71E226KE15L
Murata Manufacturing's GRM32ER71E226KE15L is a ceramic capacitor with 22uF capacitance and 25V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
C3216X7R1H106K160AC
TDK C3216X7R1H106K160AC is a 1206 SMT ceramic capacitor with 10uF capacitance, 50V URdc, and X7R temperature characteristics. Ideal for surface mount applications in electronics requiring stable performance at temperatures ranging from -55 to 125°C.
C1206C106K8RACTU
The KEMET Corporation C1206C106K8RACTU is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 15% temp coef. Ideal for surface mount applications in electronics requiring compact size and high reliability.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TAJR475K010RNJ
KYOCERA AVX TAJR475K010RNJ is a 4.7uF Tantalum Capacitor with 10V URdc, suitable for SMT mounting in various applications. Features include low Tan Delta of 0.06, leakage current of 0.0005mA, and high ripple current rating of 31mA.
TAJR105K010RNJ
TAJR105K010RNJ by KYOCERA AVX is a 1uF TANTALUM CAPACITOR with 10V URdc. It features Tan Delta of 0.04, Leakage Current of 0.0005mA, and Ripple Current of 19mA. Ideal for applications requiring compact SMT capacitors with high ESR and operating temperatures ranging from -55 to 125°C.
TAJR105K025RNJ
TAJR105K025RNJ by KYOCERA AVX is a 1uF tantalum capacitor with a rated DC voltage of 25V. It has a low tan delta of 0.04 and leakage current of 0.0005mA, making it suitable for applications requiring high reliability and stability in a compact size.
TAJR105K025RNJV
TANTALUM CAPACITOR; Capacitance: 1 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); JESD-609 Code: e3;
TAJR106M006RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR156K002RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 15 uF; Rated DC Voltage (URdc): 2.5 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR684K016RNJ
KYOCERA AVX TAJR684K016RNJ is a 0805 SMT TANTALUM CAPACITOR with 0.68uF capacitance, 16V URdc, and 0.04 Tan Delta. Ideal for applications requiring compact size, it has low leakage current of 0.0005mA and operates b/w -55 to 125°C temperature range.
TAJR154K035RNJ
TAJR154K035RNJ by KYOCERA AVX is a TANTALUM CAPACITOR with capacitance of 0.15uF and rated DC voltage of 35V. It has low Tan Delta of 0.04, ideal for applications requiring high ripple current up to 19mA. With compact size code 0805, it is suitable for surface mounting in various electronic devices.
TAJR685K004RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 6.8 uF; Rated DC Voltage (URdc): 4 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR155K006RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1.5 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR684K020RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .68 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR106K006RNJ
TAJR104K020RNJ
TAJR104K020RNJ by KYOCERA AVX is a TANTALUM CAPACITOR with capacitance of 0.1uF and rated DC voltage of 20V. It features low Tan Delta of 0.04, leakage current of 0.0005mA, and ESR of 25000mohm, making it ideal for applications requiring high reliability in compact SMT designs.
TAJR475K006RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR105K020RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 1 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR225K006RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR225K016RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR105K016RNJ
KYOCERA AVX TAJR105K016RNJ is a 1uF TANTALUM CAPACITOR with 16V URdc. It has Tan Delta of 0.04, Leakage Current of 0.0005mA, and ESR of 20mohm. Ideal for applications requiring compact SMT capacitors with high capacitance and low leakage current in a wide temperature range from -55 to 125 °C.
TAJR225K010RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 2.2 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJR475M010ANJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved