Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
TAJC476K010RNJ by KYOCERA AVX is a 47uF Tantalum Capacitor with 10V URdc. It features low Tan Delta of 0.06 and high Ripple Current of 121mA, making it ideal for applications requiring stable capacitance in compact SMT designs. With a temperature range from -55 to 125°C, it suits various electronic devices.
Median Price
$0.226
Lifecycle Status
Suppliers In-Stock
42
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.620
100+ parts
$0.263
1k+ parts
-
10k+ parts
Newark
$0.658
$0.301
$0.283
$0.271
Mouser Electronics
$0.710
$0.308
$0.215
Element14
$0.868
$0.369
$0.362
TTI Europe
$0.145
$0.140
TTI
$0.199
$0.187
Arrow
$0.172
$0.133
Verical
Future Electronics
$0.310
$0.295
Farnell
$0.205
$0.174
Chip1Stop
$0.170
Nova Conductors
$0.194
DF Sales Co.
$0.200
Component Electronics Inc.
$0.380
$0.290
$0.250
Maritex
$0.476
$0.288
$0.211
TME
$0.580
$0.241
$0.182
Bristol Electronics
$0.660
$0.330
$0.132
IBS Electronics
$0.437
$0.472
Vyrian
NAC Semi
$0.680
Martec Srl
Cyclops Electronics Ltd
Rutronik
$0.216
$0.204
ComSIT Distribution GmbH
ACDS - Activité Composants Distribution Service
Dan-Mar Components
LWI Electronics Inc
Schukat
$0.294
$0.220
PC Components Company LLC
Holdelec - ElecDif-Pro
ComSIT USA
Sea View Technologies
Atlantic Semiconductor
Semtec, LLC
Contempo Components LLC
Rebound Electronics
LIBRA Elektronik GmbH
Euro-Tech
J2 Sourcing AB
Cogito LLC
Prism Electronics
Ampacity Inc.
$0.101
Semicontronic
$0.098
Aranea Global
$0.190
Argo Parts USA
$0.188
Aztec Data Supply Inc.
Advanced Electronics
$0.286
$0.272
Corohmni
$0.291
GreenTree Electronics
Eastek
Glotronic Ltd.
Authorized Procurement Solutions
Continental Prestige Electronics
$0.207
Tantalum capacitors are known for their stability and reliability, making this product a good choice for applications requiring consistent performance over time.
A low tan delta indicates low dissipation factor, meaning this capacitor has low losses and is efficient in energy storage.
Low leakage current ensures minimal power loss and better overall performance in applications where efficiency is critical.
High ripple current rating allows this capacitor to handle fluctuations in current, making it suitable for applications with varying loads.
With a capacitance of 47uF, this capacitor can store a significant amount of charge, making it suitable for filtering and smoothing applications.
This capacitor is rated for a maximum DC voltage of 10V, making it suitable for low voltage applications where reliable voltage regulation is needed.
Fixed Capacitors TAJC476K010RNJ attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TAJC476K010RNJ Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
NSN
5910-01-660-6730, 5910016606730
NIIN
016606730
PCN Part Number - TAJ Series Suffix 08/Dec/2008
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
LM358AN
Philips Semiconductors
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
MMBT2222ALT1G
Onsemi
MMBT2222ALT1G by Onsemi is a NPN BJT transistor with 3 terminals, max power dissipation of 0.3W, and hFE of 75. Ideal for switching applications, it operates b/w -55 to 150 °C with a max collector-emitter voltage of 40V. This surface-mount device has a transition frequency of 300MHz and turn-on time of 35ns.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
1N4148WT
Taitron Components
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
First Components International
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Clamping Voltage: 29.2 V; Nominal Breakdown Voltage: 21.1 V; Polarity: BIDIRECTIONAL; Maximum Repetitive Peak Reverse Voltage: 18 V;
MMBT2907ALT1G
MMBT2907ALT1G by Onsemi is a PNP BJT transistor with 100 min hFE, 60V VCEO, and 200MHz fT. Ideal for switching applications, it has a small outline package with Gull Wing terminals and can handle up to 0.6A of collector current.
LM317T
Comset Semiconductors
Other Regulators; No. of Terminals: 3; Terminal Pitch: 2.54 mm; Minimum Output Voltage-1: 1.2 V; Technology: BIPOLAR; Operating Temperature (TJ-Max): 125 Cel;
NC7WZ17P6X
The Onsemi NC7WZ17P6X is a logic gate with 2 functions, featuring a propagation delay of 13.1 ns at 1.8V supply voltage. Ideal for industrial applications, it operates b/w -40 to 85°C and has a max power supply current of 100mA. With Schmitt Trigger technology and small outline packaging, it suits compact electronic designs requiring fast signal processing.
1N4148
Rfe International
RECTIFIER DIODE; Surface Mount: NO; No. of Elements: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Forward Voltage (VF): 1 V; Config: SINGLE;
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
2902037
Phoenix Contact
MODULAR TERMINAL BLOCK;
ESD5Z5.0T1G
ESD5Z5.0T1G by Onsemi is a unidirectional Trans Voltage Suppressor Diode with 5V reverse test voltage and 174W peak power dissipation. It is used for transient suppression in electronic circuits, meeting IEC-61000-4-2, 4-4 standards and UL recognized for reliability.
Jiangsu Changjiang Electronics Technology
BSS138
Siemens
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Maximum Drain-Source On Resistance: 3.5 ohm; Terminal Finish: Tin/Lead (Sn/Pb);
Sangdest Microelectronics (Nanjing)
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358N
Samsung
Transpro Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; JESD-609 Code: e0; Terminal Finish: Tin/Lead (Sn/Pb); Nominal Breakdown Voltage: 21.1 V; Maximum Clamping Voltage: 29.2 V;
E8WSDC12-32.768KTR
Ecliptek
PARALLEL - FUNDAMENTAL; Mounting Feature: SURFACE MOUNT; Frequency Tolerance: 20 ppm; Aging: 3 PPM/YEAR; Load Capacitance: 12.5 pF; Nominal Operating Frequency: .032768 MHz;
LM358M
EEEFK1C101P
Panasonic
Panasonic EEEFK1C101P is a 100uF aluminum electrolytic capacitor with 16V rated DC voltage. It has tan delta of 0.16 and leakage current of 0.016mA, suitable for AEC-Q200 standard automotive applications due to its compact SMT package style and high ripple current handling capability of 180mA.
530L104KT16T
American Technical Ceramics
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C0805C224K5RACTU
KEMET Corporation
The KEMET C0805C224K5RACTU is a ceramic capacitor with capacitance of 0.22uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in various electronic circuits requiring stable capacitance at different temperatures.
06035C104K4T4A
KYOCERA AVX
06035C104K4T4A by KYOCERA AVX is a ceramic capacitor with 0.1uF capacitance, X7R temperature coefficient, and 10% tolerance. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance and 50V rated DC voltage.
M39006/250052
Cornell Dubilier Electronics
M39006/250052 by Cornell Dubilier Electronics is a TANTALUM (WET) capacitor with a capacitance of 120 uF and rated DC voltage of 50 V. It has a tan delta of 0.225 and leakage current of 0.004 mA, making it suitable for applications requiring high ripple current and low leakage.
GRM188R71H104KA93D
Murata Manufacturing
Murata Manufacturing's GRM188R71H104KA93D is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications due to its rectangular package shape and surface mounting feature.
C0805C103J5RACTU
KEMET C0805C103J5RACTU is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±5% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
08051C103KAT2A
08051C103KAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 100V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
UUD1H101MNR1GS
Nichicon
Nichicon UUD1H101MNR1GS is a 100uF, 50V aluminum electrolytic capacitor with tan delta of 0.14 and leakage current of 0.05mA. Ideal for surface mount applications in electronics due to its high ripple current rating of 300mA.
C0805C104K5RACAUTO
KEMET C0805C104K5RACAUTO is a ceramic capacitor with 0.1uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and -55 to 125°C operating range. Ideal for automotive applications meeting AEC-Q200 standard, it features SMT package style and wraparound terminals.
GCM155R71H104KE02J
Murata Manufacturing's GCM155R71H104KE02J is a ceramic capacitor with capacitance of 0.1uF, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125°C. Ideal for surface mount applications in automotive electronics due to AEC-Q200 compliance.
CL31B104KBCNNNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL31B104KBCNNNC is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It features X7R temperature characteristics, -55 to 125 °C operating range, and compact SMT package style. Ideal for applications requiring high reliability in compact electronic devices.
C5750X7S2A106M230KB
TDK
The TDK C5750X7S2A106M230KB is a ceramic capacitor with 10uF capacitance and 100V rated DC voltage. With X7S temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications due to its rectangular package shape and wraparound terminals.
CL05C330JB5NNNC
Samsung Electro-mechanics' CL05C330JB5NNNC is a ceramic capacitor with 0.000033 uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, ideal for surface mount applications requiring high precision and stability. The compact rectangular package with wraparound terminals ensures efficient PCB integration.
CC0402KRX7R9BB104
Yageo
Yageo CC0402KRX7R9BB104 is a SMT ceramic capacitor with 0.1uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
EEAGA1H4R7
Panasonic EEAGA1H4R7 is a 4.7uF, 50V Aluminum Electrolytic Capacitor with 0.1 Tan Delta and 0.003mA Leakage Current. Ideal for applications requiring high ripple current handling in temperatures ranging from -55 to 105°C.
CGA6P1X7R1N106K250AC
TDK CGA6P1X7R1N106K250AC is a ceramic capacitor with 10uF capacitance, 75V URdc, X7R temp code. SMT package style for surface mount applications in automotive electronics. Offers -55 to 125 °C operating range and AEC-Q200 compliance.
08055C103KAT2A
08055C103KAT2A by KYOCERA AVX is a SMT ceramic capacitor with 0.01uF capacitance, 50V URdc, and X7R temperature code. Ideal for applications requiring compact size and high reliability in a wide temperature range from -55 to 125°C.
BFC237036473
Vishay Intertechnology
Vishay Intertechnology BFC237036473 is a 0.047uF film capacitor with 250V DC and 160V AC ratings. Featuring polyester dielectric, it has a rectangular package for through-hole mounting applications. With AEC-Q200 and IEC60384-2 compliance, it operates b/w -55°C to 105°C making it suitable for various electronic circuits.
C0603C104M5RACTU
KEMET C0603C104M5RACTU is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±20% tolerance. Ideal for SMT applications due to its rectangular shape, wraparound terminals, and compact size of 1.6x0.8x0.8mm.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TAJC476K016RNJ
TAJC476K016RNJ by KYOCERA AVX is a 47uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0075mA, and Ripple Current of 188mA. Ideal for applications requiring high reliability in compact SMT designs with operating temperatures ranging from -55 to 125°C.
TAJC106K035RNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJC106K025RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJC106K016RNJ
TAJC106K016RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0016mA, and Ripple Current of 94mA. Ideal for applications requiring high capacitance and low ESR in compact SMT designs with operating temperatures from -55 to 125°C.
TAJC476K016RNJV
TANTALUM CAPACITOR; Capacitance: 47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Size Code: 2412;
TAJC106K035RNJ
KYOCERA AVX TAJC106K035RNJ is a 10uF Tantalum Capacitor with 35V URdc, 0.06 Tan Delta, and 105mA Ripple Current. Ideal for SMT applications due to its compact size (6x3.2x2.6mm) and low leakage current of 0.0035mA, making it suitable for various electronic circuits requiring stable capacitance performance at temperatures ranging from -55°C to 125°C.
TAJC107K010RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 100 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJC106K025RNJV
KYOCERA AVX TAJC106K025RNJV is a 10uF Tantalum Capacitor with 25V URdc, -55 to 125 °C operating temp, and 1800 mohm ESR. Ideal for SMT applications due to its compact size (6x3.2x2.6mm) and J Bend terminals, offering reliable performance in various electronic circuits.
TAJC107K010RNJV
TAJC107K010RNJV by KYOCERA AVX is a TANTALUM CAPACITOR with 100uF capacitance, 10V URdc, and 0.08 Tan Delta. Ideal for applications requiring POLARIZED capacitors with -55 to 125 °C operating temperature range, such as automotive electronics meeting AEC-Q200 standards.
TAJC226K016RNJ
TAJC226K016RNJ by KYOCERA AVX is a 22uF, 16V tantalum capacitor with low Tan Delta of 0.06 and ESR of 1000mohm. Ideal for SMT applications due to its compact size (6x3.2x2.6mm) and J Bend terminals, suitable for use in electronics requiring stable capacitance at temperatures ranging from -55 to 125°C.
TAJC106M025RNJ
TAJC106M025RNJ by KYOCERA AVX is a rectangular package tantalum capacitor with a capacitance of 10 uF and rated DC voltage of 25 V. It has a low tan delta of 0.06 and leakage current of 0.0025 mA, making it suitable for applications requiring high reliability and stability in temperature ranges from -55 to 125 °C.
TAJC227K006RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJC106K016RNJY
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJC476K020RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJC106K016RNJV
TANTALUM CAPACITOR; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Size Code: 2412;
TAJC226K016RNJV
TANTALUM CAPACITOR; Capacitance: 22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Terminal Finish: MATTE TIN OVER NICKEL;
TAJC226K025RNJ
TAJC226K025RNJ by KYOCERA AVX is a 22uF TANTALUM CAPACITOR with 25V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0055mA, and Ripple Current of 112mA. Ideal for applications requiring POLARIZED capacitors in SMT packages with dimensions of 6mm x 3.2mm x 2.6mm at temperatures ranging from -55°C to 125°C.
TAJC107K006RNJ
KYOCERA AVX TAJC107K006RNJ is a 100uF, 6.3V TANTALUM CAPACITOR with low Tan Delta of 0.06 and ESR of 900mohm. Ideal for SMT applications due to its compact size (2.6x3.2x6mm) and J BEND terminals, operating b/w -55°C to 125°C in various electronic circuits.
TAJC106K020RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJC476K016BNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 47 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved