Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX TAJB226K016RNJV is a 22uF Tantalum Capacitor with 16V URdc. It has -55 to 125 °C operating temperature range and 2300 mohm ESR. Ideal for SMT applications requiring compact size and high capacitance in electronic devices.
Median Price
-
Lifecycle Status
Suppliers In-Stock
2
In-Stock Inventory
1k+
Vyrian
1+ parts
100+ parts
1k+ parts
10k+ parts
Nova Conductors
Ampacity Inc.
$0.010
Aztec Data Supply Inc.
$0.090
Corohmni
$0.223
Semicontronic
$1.010
$0.985
$0.980
AZTECH Wire
$12.090
Argo Parts USA
Continental Prestige Electronics
Bastille Electronics
Tantalum capacitors provide high capacitance values in a small package size, making them suitable for applications where space is limited.
Tray packaging in 7-inch reels allows for efficient handling and automated assembly processes, saving time and labor costs during production.
A capacitance value of 22uF provides good energy storage capacity, allowing the capacitor to effectively filter and stabilize voltage levels in electronic circuits.
With a high rated DC voltage of 16V, this capacitor can safely handle higher voltage levels without the risk of breakdown, making it suitable for various electronic applications.
The low equivalent series resistance (ESR) of 2300mOhm ensures minimal power loss and efficient performance of the capacitor in filtering and decoupling applications.
Fixed Capacitors TAJB226K016RNJV attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Length:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Size Code:
Terminal Finish:
Width:
TAJB226K016RNJV Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
2N2222A
Nte Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Maximum Power Dissipation (Abs): 1 W; Maximum Collector Current (IC): .8 A; Terminal Form: WIRE;
LM107H
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Maximum Bias Current (IIB) @25C: .075 uA;
FDV303N
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Transistor Application: SWITCHING; JESD-609 Code: e3;
1N4148
Renesas Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
LM107H/883C
National Semiconductor
LM107H/883C by National Semiconductor is a MILITARY-grade Operational Amplifier with +-5/+-15V supplies. Featuring 2000uV max input offset voltage, it operates from -55 to 125 °C. Ideal for applications requiring VOLTAGE-FEEDBACK architecture and frequency compensation.
LM358AN
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
2N7002
Zetex Plc
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .2 W; Peak Reflow Temperature (C): 260; Package Shape: RECTANGULAR;
LM358M
Texas Instruments
LM358M by Texas Instruments is an Operational Amplifier with 2 functions, featuring a max input offset voltage of 9000 uV and a nominal voltage of 5 V. It is commonly used in applications requiring high common mode rejection ratio and low bias current, such as sensor interfaces and signal conditioning circuits.
BAV99
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Comset Semiconductors
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
Hitachi
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
LM358N
Silicon Group
Itt Components
RECTIFIER DIODE; Surface Mount: NO; Config: SINGLE; Maximum Operating Temperature: 200 Cel; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .15 A;
Unitrode
SMBJ18CA
Db Lectro
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
STM32H753IIK6
STMicroelectronics
STM32H753IIK6 by STMicroelectronics is a 32-bit microcontroller with 176 terminals, operating at up to 48 MHz. It features 20-Ch 16-Bit ADCs, 2-Ch 12-Bit DACs, and peripherals like CAN, ETHERNET, and USB. Ideal for industrial applications requiring high-speed processing and extensive connectivity options.
C1206C104M5RACTU
KEMET Corporation
KEMET C1206C104M5RACTU is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±20% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance across temperatures.
LL4148
First Components International
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; JEDEC-95 Code: TO-236AB; Qualification: Not Qualified; Package Style (Meter): SMALL OUTLINE;
SS14
Hitano Enterprise
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
VJ1206Y104KXACW1BC
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRM188R61A106ME69D
Murata Manufacturing
Murata Manufacturing's GRM188R61A106ME69D is a 0603 SMT ceramic capacitor with 10uF capacitance and 10V URdc. It has X5R temp characteristics, -55 to 85 °C operating range, and 20% tolerance. Ideal for applications requiring compact surface mount capacitors with stable performance in various electronic devices.
GRT155R71E103KE01D
Murata Manufacturing's GRT155R71E103KE01D is a ceramic capacitor with 0.01uF capacitance, X7R temperature characteristics, and 25V rated DC voltage. It is ideal for surface mount applications in automotive electronics due to its AEC-Q200 standard compliance and compact 0402 size.
06035C104JAT2A
KYOCERA AVX
06035C104JAT2A by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF, rated for 50V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for surface mount applications requiring compact size and high reliability in electronic circuits.
C1005X7R1E103K050BB
TDK
The TDK C1005X7R1E103K050BB is a ceramic capacitor with capacitance of 0.01uF and rated DC voltage of 25V. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
BFC238320474
Vishay Intertechnology
Vishay Intertechnology BFC238320474 is a 0.47uF film capacitor with 630V DC and 220V AC ratings. Featuring polypropylene dielectric, it has a rectangular package shape for through-hole mounting applications. With a temperature range of -55 to 105 °C, it is ideal for various electronic circuits requiring high capacitance and voltage tolerance.
M39006/25-0248
Vishay Tansitor
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 220 uF; Rated DC Voltage (URdc): 75 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CL10B104KB8NNND
Samsung Electro-mechanics
CL10B104KB8NNND by Samsung Electro-mechanics is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high reliability and compact size.
TMK325ABJ476MM-T
Taiyo Yuden
Taiyo Yuden's TMK325ABJ476MM-T is a ceramic capacitor with 47uF capacitance and 25V rated DC voltage. Featuring X5R temperature characteristics, it operates b/w -55 to 85 °C, ideal for SMT applications requiring compact size and high reliability. The wraparound terminals and multi-layer design make it suitable for various electronic devices.
C0805C224K5RACAUTO
KEMET Corporation's C0805C224K5RACAUTO is a ceramic capacitor with 0.22uF capacitance, rated for 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for automotive applications meeting AEC-Q200 standard, it comes in SMT package with wraparound terminals.
T491C106K025AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
C0402C101J5GACAUTO
C0402C101J5GACAUTO by KEMET Corp is a ceramic capacitor with capacitance of 0.0001 uF and rated DC voltage of 50V. It has a temperature coefficient of 30ppm/°C and can operate in temperatures ranging from -55 to 125 °C. This SMT package is commonly used in automotive applications due to its AEC-Q200 reference standard.
BFC241841203
Vishay Intertechnology's BFC241841203 is a rectangular package film capacitor with a capacitance of 0.012 uF and rated DC voltage of 250 V. It has a max operating temperature of 85°C and is commonly used in applications requiring fixed capacitors, such as electronic circuits and power supplies.
CL21A106KPFNNNE
Samsung Electro-mechanics' CL21A106KPFNNNE is a ceramic capacitor with 10uF capacitance and 10V rated DC voltage. With X5R temperature characteristics, it operates b/w -55 to 85 °C, making it ideal for surface mount applications requiring compact size and high reliability.
GRM188R61E106MA73J
Murata Manufacturing's GRM188R61E106MA73J is a 0603 SMT ceramic capacitor with 10uF capacitance and 25V URdc. It has X5R temperature characteristics, -55 to 85 °C operating range, and ±20% tolerance. Ideal for surface mount applications requiring compact size and high capacitance stability.
CGA9P3X7S2A156M250KB
TDK CGA9P3X7S2A156M250KB is a rectangular package ceramic capacitor with 15uF capacitance and 100V rated DC voltage. It has a temperature coefficient of 22% and can operate b/w -55°C to 125°C. This capacitor is suitable for surface mount applications in automotive electronics (AEC-Q200).
M39006/250248
M39006/250248 by Cornell Dubilier Electronics is a TANTALUM CAPACITOR with 220uF capacitance, 75V URdc, and 702mA ripple current. It has a tan delta of 0.37 and leakage current of 0.01mA. Ideal for applications requiring polarized capacitors in temperatures ranging from -55°C to 125°C.
CC0402KRX7R8BB103
Yageo
Yageo CC0402KRX7R8BB103 is a ceramic capacitor with 0.01uF capacitance and 25V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
C0603C220J5GACTU
KEMET Corporation's C0603C220J5GACTU is a ceramic capacitor with 0.000022 uF capacitance and 50V URdc. Featuring C0G temperature characteristics, it operates b/w -55 to 125 °C with ±5% tolerance. Ideal for surface mount applications requiring compact size and high reliability in various electronic circuits.
M39006/30-0040
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 850 uF; Rated DC Voltage (URdc): 8 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TAJB106K016RNJ
TAJB106K016RNJ by KYOCERA AVX is a 10uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0016mA, and ESR of 2800mohm. Ideal for applications requiring compact SMT capacitors with high ripple current capabilities up to 70mA.
TAJB106K016RNJV
KYOCERA AVX TAJB106K016RNJV is a 10uF Tantalum Capacitor with 16V URdc, -55 to 125 °C operating temp, and 2800 mohm ESR. Ideal for SMT applications requiring compact size and high reliability in electronic circuits.
TAJB107K006RNJ
TAJB107K006RNJ by KYOCERA AVX is a TANTALUM CAPACITOR with 100uF capacitance and 6.3V rated DC voltage. It features low Tan Delta of 0.1, high ripple current of 89mA, and low leakage current of 0.0063mA, making it ideal for applications requiring stable performance in a compact SMT package.
TAJB107M010RNJ
KYOCERA AVX TAJB107M010RNJ is a 100uF Tantalum Capacitor with 10V URdc, 0.08 Tan Delta, and 0.01mA Leakage Current. Ideal for SMT applications due to its compact size (3.5mm x 2.8mm x 1.9mm) and high ripple current rating of 99mA.
TAJB476K010RNJ
KYOCERA AVX TAJB476K010RNJ is a 47uF TANTALUM CAPACITOR with 10V URdc. It has Tan Delta of 0.08, Leakage Current of 0.0047mA, and ESR of 1000mohm. Ideal for applications requiring compact SMT capacitors with high ripple current capability up to 117mA in a temperature range from -55°C to 125°C.
TAJB475K025RNJ
TAJB475K025RNJ by KYOCERA AVX is a 4.7uF TANTALUM CAPACITOR with 25V URdc, suitable for applications requiring low Tan Delta of 0.06 and high Ripple Current of 95mA. With a compact size of 3.5mm x 2.8mm x 1.9mm, it is ideal for SMT mounting in electronics operating b/w -55°C to 125°C.
TAJB226K016RNJ
KYOCERA AVX's TAJB226K016RNJ is a 22uF Tantalum Capacitor with 16V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0035mA, and ESR of 2300mohm. Ideal for applications requiring compact SMT capacitors with high ripple current capabilities up to 77mA in a wide temperature range from -55°C to 125°C.
TAJB106K020RNJ
TAJB106K020RNJ by KYOCERA AVX is a 10uF Tantalum Capacitor with 20V URdc. It features Tan Delta of 0.06, Leakage Current of 0.002mA, and ESR of 2100mohm. Ideal for applications requiring compact SMT capacitors with high ripple current capability up to 80mA in a wide temperature range from -55°C to 125°C.
TAJB106K025RNJ
TAJB106K025RNJ by KYOCERA AVX is a 10uF Tantalum Capacitor with 25V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0025mA, and ESR of 2500mohm. Ideal for applications requiring compact SMT capacitors with high ripple current capability up to 74mA.
TAJB475K035RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJB105K035RNJ
TAJB105K035RNJ by KYOCERA AVX is a 1uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.04, Leakage Current of 0.0005mA, and ESR of 6500mohm. Ideal for applications requiring high ripple current handling in a compact SMT package design.
TAJB106K020RNJV
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 20 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJB107M010RNJV
KYOCERA AVX TAJB107M010RNJV is a 100uF TANTALUM CAPACITOR with 10V URdc, -55 to 125 °C operating temp range, and 1400 mohm ESR. Ideal for SMT applications requiring compact size and high capacitance in electronic devices like smartphones and tablets.
TAJB475K016RNJ
KYOCERA AVX TAJB475K016RNJ is a 4.7uF Tantalum Capacitor with 16V URdc, suitable for SMT applications. Features low Tan Delta of 0.06 and high Ripple Current of 62mA, ideal for compact electronic devices requiring stable capacitance at temperatures ranging from -55 to 125°C.
TAJB476K010RNJV
TANTALUM CAPACITOR; Capacitance: 47 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Minimum Operating Temperature: -55 Cel;
TAJB226K010RNJ
TAJB226K010RNJ by KYOCERA AVX is a 22uF TANTALUM CAPACITOR with 10V URdc. It features Tan Delta of 0.06, Leakage Current of 0.0022mA, and Ripple Current of 75mA. Ideal for applications requiring compact SMT capacitors with high capacitance and low ESR like power supplies and consumer electronics.
TAJB105K035RNJV
TANTALUM CAPACITOR; Capacitance: 1 uF; Rated DC Voltage (URdc): 35 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Negative Tolerance: 10 %;
TAJB106K010RNJ
TAJB106K010RNJ by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 10V URdc. It features Tan Delta of 0.06, Leakage Current of 0.001mA, and ESR of 2100mohm. Ideal for applications requiring compact SMT capacitors with high ripple current handling capabilities up to 80mA.
TAJB106M016RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJB226K016Y
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved