Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX TAJA475K016RNJ is a 4.7uF, 16V tantalum capacitor with low Tan Delta of 0.06 and high ripple current of 55mA. Ideal for SMT applications requiring compact size and reliable performance in temperatures ranging from -55 to 125°C.
Median Price
$0.097
Lifecycle Status
Suppliers In-Stock
53
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.350
100+ parts
$0.137
1k+ parts
$0.099
10k+ parts
-
Mouser Electronics
$0.138
$0.100
$0.082
Newark
$0.153
Element14
$0.124
TTI Europe
$0.064
TTI
$0.092
Verical
$0.089
Arrow
$0.078
Future Electronics
$0.066
Farnell
$0.126
$0.090
Chip1Stop
$0.075
$0.063
$0.055
Nova Conductors
$0.132
Bristol Electronics
$0.310
$0.155
$0.062
$0.047
TME
$0.450
$0.114
$0.086
$0.077
Maritex
$0.823
$0.209
$0.161
Cyclops Electronics Ltd
Rutronik
$0.084
NAC Semi
$0.096
IBS Electronics
$0.095
Vyrian
Chip Stock
Amar Radio Corporation
Micros
$0.065
Sensible Micro Corp
LWI Electronics Inc
Micros sp.j. W. Kędra i J. Lic
ComSIT Distribution GmbH
Schukat
$0.068
$0.056
Connector Distribution Corp
Right Parts Inc.
Prism Electronics
Dan-Mar Components
PC Components Company LLC
Infinite Electronics LLP
Resion
SOS electronic
$0.091
Rebound Electronics
Lantek
MISTER SPROCKETS
Partservice
$0.083
Extreme Components
Semi Source
Component Sense
ABC Electronics Ltd.
Martec Srl
ACDS - Activité Composants Distribution Service
ComSIT USA
North Shore Components
Holdelec - ElecDif-Pro
CirComp Electronics, Inc.
Atlantic Semiconductor
EMSNET
Velocity Electronics
Ampacity Inc.
$0.044
Decca Corp
$0.043
Semicontronic
$0.094
$0.093
Argo Parts USA
$0.115
$0.112
Advanced Electronics
$0.300
$0.285
Corohmni
$0.410
Aztec Data Supply Inc.
$0.430
Eastek
GreenTree Electronics
Abacus Technologies
Infinite Electronics LLP (Excess)
Continental Prestige Electronics
QUARKTWIN TECHNOLOGY LTD
Futuretech Components
S.R.D Solutions
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
Formix International (Excess)
ChipTracer
Assy Fe
Speed Components Ltd (Excess)
Kepictronics
Netroflash
$0.129
$0.125
$0.123
Akira Global LLC
Tantalum capacitors offer high stability and reliability, making them suitable for critical electronic applications.
Low tan delta value indicates minimal energy loss in the capacitor, ensuring efficient operation.
Low leakage current ensures the capacitor maintains its charge over time, improving overall performance.
Rectangular package shape allows for easy and compact integration into circuit boards.
High ripple current rating ensures stable performance under varying loads.
TR plastic packaging provides protection and convenience during transportation and storage.
Having two terminals simplifies installation and improves connectivity.
SMT package style allows for easy surface mounting, saving space and facilitating automated assembly.
J bend terminals provide mechanical stability and secure soldering connections.
Having a negative tolerance helps ensure that the capacitor's actual value does not fall below the specified value.
High maximum operating temperature allows for reliable operation in various environmental conditions.
Tantalum capacitors offer high capacitance density and excellent stability, making them ideal for demanding applications.
Low minimum operating temperature ensures the capacitor can function in extreme cold conditions.
Matte tin finish with nickel barrier provides good solderability and corrosion resistance.
Polarized design ensures proper orientation during installation, preventing reverse voltage damage.
Low profile height allows for compact design and easy integration in space-constrained applications.
Small width contributes to overall compact size and efficient use of board space.
Low ESR value indicates minimal power loss and efficient energy transfer within the capacitor.
Surface mount capability simplifies assembly, reduces lead inductance, and enhances overall circuit performance.
Moderate length allows for easy handling and installation without sacrificing space efficiency.
Having a positive tolerance ensures that the capacitor's actual value does not exceed the specified value, maintaining accuracy in circuit design.
The capacitance value of 4.7 uF is suitable for various applications, providing the necessary charge storage capacity.
The 16 V rated DC voltage allows for reliable performance in circuits with moderate voltage requirements.
Fixed Capacitors TAJA475K016RNJ attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Additional Features:
Capacitance:
Capacitor Type:
Dielectric Material:
Equivalent Series Resistance / ESR (mohm ):
Height:
JESD-609 Code:
Leakage Current (mA):
Length:
Mounting Feature:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Polarity:
Positive Tolerance:
Rated DC Voltage (URdc):
Ripple Current (mA):
Size Code:
Tan Delta:
Terminal Finish:
Terminal Shape:
Width:
TAJA475K016RNJ Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
HTS
8532.21.00.50
SB
NSN
5910-01-606-9719, 5910016069719
NIIN
016069719
PCN Part Number - TAJ Series Suffix 08/Dec/2008
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
ABS07-32.768KHZ-T
Abracon
Abracon ABS07-32.768KHZ-T crystal oscillator offers 20 ppm frequency tolerance, 144% stability, and 70000 ohm series resistance. Ideal for applications requiring 0.032768 MHz frequency precision in a compact surface-mount design with gold over nickel finish.
2N2222A
Silicon Transistor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
1N4148
Gulf Semiconductor
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
M39029/58-360
Defense Logistics Agency
CONNECTOR ACCESSORY; Contact Type: CRIMP REAR RELEASE; Mating Contacts: M39029/56-348, M39029/57-354; Insertion Tool Sources: MILITARY; Contact Gender: MALE; Alternate Contact Sources: MILITARY;
LM358MX
Texas Instruments
LM358MX by Texas Instruments is a dual operational amplifier with a max input offset voltage of 9000 uV. It has a nominal voltage of 5V and a min voltage gain of 15000. This op amp is commonly used in applications requiring amplification and signal conditioning.
SMBJ18CA
Changzhou Starsea Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358AN
Fairchild Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: THROUGH-HOLE; No. of Terminals: 8; Package Code: DIP; Package Shape: RECTANGULAR;
PAP-06V-S
J S T Mfg
PAP-06V-S by J S T Mfg is a 6-contact BOARD CONNECTOR with 94V-0 UL Flammability Code. It has FEMALE contacts, CRIMP termination, and comes WITH CABLE ASSEMBLY for CABLE mounting applications.
Forward International Electronics
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .625 W; Maximum Collector Current (IC): .6 A;
1N4148WS-7-F
Diodes Incorporated
1N4148WS-7-F by Diodes Inc. is a single rectifier diode with max reverse recovery time of 0.004 us and max reverse current of 1 uA. It operates b/w -65 to 150 °C, ideal for applications requiring small outline surface mount diodes with a max output current of 0.15 A.
Concord Semiconductor
TRANS VOLTAGE SUPPRESSOR DIODE; Surface Mount: YES; Maximum Repetitive Peak Reverse Voltage: 18 V; Nominal Breakdown Voltage: 21.05 V; Polarity: BIDIRECTIONAL; Maximum Clamping Voltage: 29.2 V;
LM358ADR
LM358ADR by Texas Instruments is an operational amplifier with 2 functions, featuring a max input offset voltage of 5000 uV and nominal voltage of 5V. Widely used in applications requiring high voltage gain, it operates within a temperature range of 0-70°C and offers frequency compensation for stability.
BAV99
Cheng-yi Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
Hitachi
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
1N4148WS
Synsemi
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
M85049/85-08W02
Amphenol
CIRCULAR CONN ACCESSORY; Shell Sizes: 8; 9; IEC Conformity: NO; MIL-Connector Accessory Name: BAND LOCK ADAPTER; MIL Conformity: YES; DIN Conformity: NO;
LL4148
Micronas Semiconductor Holding Ag
RECTIFIER DIODE; Surface Mount: YES; No. of Phases: 1; Maximum Repetitive Peak Reverse Voltage: 100 V; Maximum Output Current: .2 A; Maximum Forward Voltage (VF): 1.2 V;
Silicon Standard
F951C476MBAAQ2
KYOCERA AVX
KYOCERA AVX F951C476MBAAQ2 is a TANTALUM CAPACITOR with 47uF capacitance, 16V URdc, and 0.1 Tan Delta. Ideal for applications requiring compact SMT capacitors with low leakage current (0.0075mA) and high ripple current (151mA).
ECEA1HN4R7U
Panasonic
Panasonic ECEA1HN4R7U is a 4.7uF Aluminum Electrolytic Capacitor with 50V URdc, suitable for applications requiring high ripple current (30mA) and low leakage current (0.01005mA). Its cylindrical package design with through-hole mounting makes it ideal for various electronic circuits.
C0805C104K5RAC
Vishay Intertechnology
Vishay Intertechnology C0805C104K5RAC is a ceramic capacitor with 0.1uF capacitance, 50V URdc, and X7R temp characteristics. Ideal for SMT applications in electronics due to its compact size and high operating temperature range of -55 to 125 °C.
M39006/22-0639
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
GRM188C81C106MA73D
Murata Manufacturing
GRM188C81C106MA73D by Murata is a ceramic capacitor with 10uF capacitance and 16V rated DC voltage. With X6S temp characteristics, it operates b/w -55 to 105 °C, making it ideal for SMT applications requiring compact size and high reliability.
C0402C470K5GACTU
KEMET Corporation
KEMET C0402C470K5GACTU is a ceramic capacitor with 0.000047uF capacitance, rated for 50V. With C0G temperature characteristics and 10% tolerance, it's ideal for SMT applications in a wide temp range (-55 to 125°C). Its compact size (1x0.5x0.5mm) makes it suitable for various electronic devices.
C0805C106K4PACTU
KEMET C0805C106K4PACTU is a ceramic capacitor with 10uF capacitance, 16V rated DC voltage, and X5R temperature coefficient. Ideal for SMT applications due to its rectangular package shape and wraparound terminals. Operating range from -55°C to 85°C makes it suitable for various electronic devices.
C0603C222K5RACTU
KEMET C0603C222K5RACTU is a ceramic capacitor with 0.0022uF capacitance and 50V URdc. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CC0603ZRY5V9BB104
Yageo
Yageo CC0603ZRY5V9BB104 is a SMT ceramic capacitor with 0.1uF capacitance, 50V URdc, and -30 to 85°C operating range. Ideal for compact electronic devices requiring high capacitance in a small footprint.
C3216X7R1H106K160AE
TDK
The TDK C3216X7R1H106K160AE is a ceramic capacitor with 10uF capacitance and 50V rated DC voltage. With X7R temperature characteristics, it operates b/w -55 to 125°C. Ideal for surface mount applications in electronics due to its compact size and high reliability.
C1005X7R1H104K050BB
TDK C1005X7R1H104K050BB is a SMT ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications requiring compact size and stable performance in various electronic circuits.
CL05B102KB5NNNC
Samsung Electro-mechanics
CL05B102KB5NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.001uF capacitance and 50V URdc. With X7R temp characteristics, it operates from -55 to 125 °C, making it ideal for SMT applications requiring compact size and high reliability in various electronic circuits.
T491D106K025AT
Cornell Dubilier Electronics
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
CK05BX104K
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
M39006/22-0565
Vishay Intertechnology's M39006/22-0565 is a TANTALUM CAPACITOR with 10uF capacitance, 50V URdc, and 0.04 Tan Delta. Ideal for MIL-PRF-39006/22 applications requiring high ripple current (193.05mA) and low leakage current (0.001mA). Operating temperature range from -55 to 125 °C in through-hole mount design.
C1210C475K5RACTU
KEMET C1210C475K5RACTU is a ceramic capacitor with 4.7uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and 10% tolerance. Ideal for surface mount applications in electronics requiring reliable multi-layer capacitors.
CC0402MRX5R5BB475
Yageo CC0402MRX5R5BB475 is a 4.7uF ceramic capacitor with X5R temp characteristics, 6.3V URdc, and 20% tolerance. Ideal for SMT applications in electronics due to its compact size (1x0.5x0.5mm) and temperature coefficient of 15%/°C.
C1210X475K5RACTU
C1210X475K5RACTU by KEMET is a ceramic capacitor with 4.7uF capacitance, rated for 50V DC voltage. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for SMT applications in automotive electronics due to AEC-Q200 compliance.
CL21C220JBANNNC
CL21C220JBANNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.000022 uF capacitance and 50V rated DC voltage. With C0G temperature characteristics, it operates b/w -55 to 125 °C, making it ideal for surface mount applications requiring high precision and stability in various electronic circuits.
C0402C103K4RACTU
KEMET Corporation's C0402C103K4RACTU is a ceramic capacitor with 0.01uF capacitance, rated at 16V. It has a negative tolerance of 10% and operates b/w -55°C to 125°C. Ideal for surface mount applications requiring compact size and high reliability in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
TAJA106K016RNJ
TAJA106K016RNJ by KYOCERA AVX is a 10uF tantalum capacitor with a rated DC voltage of 16V. It has a low tan delta of 0.06 and leakage current of 0.0016mA, making it suitable for applications requiring high reliability and stability in a compact size.
TAJA106K016RNJV
TAJA106K016RNJV by KYOCERA AVX is a 10uF TANTALUM CAPACITOR with 16V URdc. It has a compact SMT package style, -55 to 125 °C operating temperature range, and 3000 mohm ESR. Ideal for applications requiring high reliability and stable capacitance in harsh environments.
TAJA106K010RNJ
KYOCERA AVX TAJA106K010RNJ is a 10uF TANTALUM CAPACITOR with 10V URdc. It has Tan Delta of 0.06, ESR of 3000mohm, and operates b/w -55 to 125 °C. Ideal for applications requiring low leakage current (0.001mA) and high ripple current (63mA).
TAJA106K010RNJV
TAJA106K010RNJV by KYOCERA AVX is a 10uF Tantalum Capacitor with 10% positive/negative tolerance, suitable for applications requiring a rated DC voltage of 10V. With a compact SMT package style and dimensions of 3.2mm x 1.6mm x 1.6mm, it operates b/w -55°C to 125°C and has an ESR of 3000 mΩ, making it ideal for various electronic circuits.
TAJA105K016RNJ
TAJA105K016RNJ by KYOCERA AVX is a 1206 SMT tantalum capacitor with 1uF capacitance and 16V URdc. It features low tan delta of 0.04, high ripple current of 33mA, and low leakage current of 0.0005mA, making it ideal for applications requiring stable performance in a compact size.
TAJA226M010RNJ
TAJA226M010RNJ by KYOCERA AVX is a 1206-sized tantalum capacitor with a capacitance of 22 uF and a rated DC voltage of 10 V. It has a low tan delta of 0.08, making it suitable for applications requiring high stability and low losses. Its compact size (3.2 mm x 1.6 mm x 1.6 mm) and surface mount package make it ideal for space-constrained electronic devices.
TAJA226M006RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 22 uF; Rated DC Voltage (URdc): 6.3 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJA226K010RNJ
TAJA226K010RNJ by KYOCERA AVX is a 22uF Tantalum Capacitor with 10V URdc. It features Tan Delta of 0.08, Leakage Current of 0.0022mA, and ESR of 3000mohm. Ideal for applications requiring compact SMT capacitors with high capacitance and low leakage current in a wide temperature range from -55 to 125°C.
TAJA106M016RNJ
TAJA106M016RNJ by KYOCERA AVX is a 10uF tantalum capacitor with a rated DC voltage of 16V. It has a low tan delta of 0.06 and leakage current of 0.0016mA, making it suitable for applications requiring high reliability and stability in a compact size.
TAJA106K006RNJ
TAJA106K006RNJ by KYOCERA AVX is a 10uF Tantalum Capacitor with 6.3V URdc, featuring Tan Delta of 0.06 and Leakage Current of 0.0006mA. Ideal for applications requiring compact SMT capacitors with high ripple current capability up to 55mA, such as power supplies and portable electronics.
TAJA225K016RNJ
KYOCERA AVX TAJA225K016RNJ is a 2.2uF TANTALUM CAPACITOR with 16V URdc, 0.06 Tan Delta, and 43mA Ripple Current. Ideal for SMT applications due to its compact size (3.2x1.6x1.6mm) and low leakage current of 0.0005mA at -55 to 125°C operating temperatures.
TAJA105K016RNJV
KYOCERA AVX TAJA105K016RNJV is a SMT TANTALUM CAPACITOR with 1uF capacitance and 16V URdc. It has -55 to 125 °C operating temp range, J BEND terminals, and POLARIZED polarity. Ideal for applications requiring compact size, high reliability, and stable performance in harsh environments.
TAJA105K025RNJ
TAJA105K025RNJ by KYOCERA AVX is a 1uF TANTALUM CAPACITOR with 25V URdc. It features Tan Delta of 0.04, Leakage Current of 0.0005mA, and Ripple Current of 39mA. Ideal for applications requiring high capacitance in compact SMT designs with operating temperatures ranging from -55 to 125°C.
TAJA105K035RNJ
TAJA105K035RNJ by KYOCERA AVX is a 1uF TANTALUM CAPACITOR with 35V URdc. It features Tan Delta of 0.04, Leakage Current of 0.0005mA, and ESR of 7500mohm. Ideal for applications requiring high ripple current handling in compact SMT designs with operating temperatures ranging from -55 to 125 °C.
TAJA476K006RNJ
TAJA476K006RNJ by KYOCERA AVX is a 47uF Tantalum Capacitor with 6.3V URdc, suitable for applications requiring high ripple current (87mA) and low leakage current (0.0028mA). With a compact SMT package style, it operates b/w -55 to 125°C making it ideal for various electronic devices.
TAJA475K016RNJV
TAJA475K016RNJV by KYOCERA AVX is a 4.7uF Tantalum Capacitor with 16V URdc, suitable for SMT mounting in various electronic applications. It features a low Tan Delta of 0.06 and leakage current of 0.0008mA, ensuring efficient performance. With a compact size of 3.2mm x 1.6mm x 1.6mm, it is ideal for space-constrained designs requiring reliable polarized capacitors.
TAJA226K006RNJ
TAJA226K006RNJ by KYOCERA AVX is a 22uF TANTALUM CAPACITOR with 6.3V URdc, Tan Delta of 0.06, and ESR of 3000 mohm. Ideal for SMT applications in electronics requiring compact size and high reliability due to its low leakage current and polarized design.
TAJA226K010RNJV
TANTALUM CAPACITOR; Capacitance: 22 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); Negative Tolerance: 10 %;
TAJA475K010RNJ
TANTALUM CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 10 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
TAJA475K016ANJV
TANTALUM CAPACITOR; Capacitance: 4.7 uF; Rated DC Voltage (URdc): 16 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID); No. of Terminals: 2;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved