Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
SA105C103KAR by KYOCERA AVX is a ceramic capacitor with 0.01uF capacitance and 50V rated DC voltage. Featuring X7R temperature characteristics, it operates b/w -55 to 125 °C, ideal for applications requiring high reliability and stability in temperature-sensitive environments. With a tubular package shape and through-hole mount feature, it is suitable for various electronic circuits.
Median Price
$0.163
Lifecycle Status
Suppliers In-Stock
15
In-Stock Inventory
1k+
DigiKey
1+ parts
$0.250
100+ parts
-
1k+ parts
10k+ parts
$0.063
Mouser Electronics
$0.300
$0.082
$0.072
$0.057
Arrow
$0.076
Verical
Nova Conductors
$0.074
Vyrian
LWI Electronics Inc
J2 Sourcing AB
Martec Srl
Bristol Electronics
$0.244
$0.146
$0.073
Sensible Micro Corp
Ashlea Components Ltd
EMSNET
ComSIT Distribution GmbH
NexGen Digital
Netroflash
Ampacity Inc.
$0.141
Continental Prestige Electronics
$0.235
$0.197
$0.140
Corohmni
$0.271
Andel Nordic
$11.061
$10.618
Cyclops Electronics Ltd (Excess)
iodParts Technologies Inc.
Ceramic dielectric materials offer good stability and reliability, making this capacitor suitable for a wide range of applications.
The tubular package shape allows for easy mounting and installation in various electronic circuits.
Multi-layer construction provides high capacitance values in a compact size, ideal for space-constrained applications.
X7R temperature characteristics provide stable performance over a wide temperature range, ensuring consistent operation in different environments.
With a capacitance value of 0.01 uF, this capacitor is suitable for filtering, decoupling, and energy storage applications in electronic circuits.
The high rated DC voltage allows this capacitor to withstand voltage spikes and fluctuations, ensuring reliable operation in power supply circuits.
Fixed Capacitors SA105C103KAR attributes and parameters. Explore more Fixed Capacitors devices from KYOCERA AVX
Capacitance:
Capacitor Type:
Diameter:
Dielectric Material:
JESD-609 Code:
Length:
Mounting Feature:
Multi-layer:
Negative Tolerance:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Package Shape:
Package Style (Meter):
Packing Method:
Positive Tolerance:
Rated DC Voltage (URdc):
Temperature Characteristics Code:
Temperature Coef (ppm/Cel):
Terminal Finish:
Terminal Shape:
SA105C103KAR Capacitors trade compliance attributes, and parameters.
ECCN
EAR99
ECCN Governance
EAR
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
BSS138LT3G
Onsemi
BSS138LT3G by Onsemi is a N-CHANNEL FET with a min DS breakdown voltage of 50V. It is used for switching applications and has a max drain current of 0.2A and max drain-source on resistance of 3.5 ohm.
2N2222A
General Diode
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
FT232RQ-REEL
FTDI
FTDI's FT232RQ-REEL is a USB bus controller with 32 terminals, operating at 3.3-5.25V. It supports data transfer rates up to 60MBps and clock frequency of 12.02MHz, suitable for RS232/RS422/RS485 interfaces in various applications like industrial automation and communication systems.
BSS138
Vishay Intertechnology
Vishay Intertechnology's BSS138 is a N-CHANNEL FET with SINGLE configuration and ENHANCEMENT MODE operation. It features 0.35W power dissipation, METAL-OXIDE SEMICONDUCTOR tech, and 150°C max temp. Ideal for surface mount applications in various electronic circuits requiring efficient power management.
SMBJ18CA
Pulse Electronics
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
General Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .35 W; Minimum DS Breakdown Voltage: 50 V; Qualification: Not Qualified;
BAV99
ROHM
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Taitron Components
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
OHN3020U
Tt Electronics Plc
OHN3020U by Tt Electronics Plc is a magnetic field sensor with a max supply voltage of 24V and hysteresis of 5mT. It features an output range of 25mA and operates in temperatures ranging from -20 to 85°C. Ideal for applications requiring precise detection and measurement of magnetic fields, such as automotive sensors or industrial automation systems.
FT232RL-REEL
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
Shenzhen Socay Electronics
EU2B-YS3103F
Idec
ROTARY SWITCH;
CRCW06030000Z0EAHP
Vishay Intertechnology's CRCW06030000Z0EAHP is a 0 ohm jumper resistor with METAL GLAZE/THICK FILM tech. Operating temp range -55 to 155 °C, it's SMT package style makes it ideal for automotive applications meeting AEC-Q200 standard.
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
Fairchild Semiconductor
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Operating Mode: ENHANCEMENT MODE; Qualification: Not Qualified;
M24308/2-1F
Adi Electronics
D SUBMINIATURE CONNECTOR; Option: GENERAL PURPOSE; Contact Gender: FEMALE; MIL Conformity: YES; Filter Feature: NO; Mating Info.: MULTIPLE MATING PARTS AVAILABLE;
DS18B20U
Dallas Semiconductor
TEMPERATURE SENSOR,SWITCH/DIGITAL OUTPUT,SERIAL; Mounting Feature: SURFACE MOUNT; No. of Terminals: 8; Package Shape or Style: RECTANGULAR; Minimum Operating Temperature: -55 Cel; Package Equivalence Code: TSSOP8,.19;
BSS138K-13
Diodes Incorporated
BSS138K-13 by Diodes Inc. is a N-channel FET with 50V DS breakdown voltage, ideal for switching applications. It features single configuration with built-in diode, operating in enhancement mode. With 3 terminals and 0.31A max drain current, it offers high performance in small outline package style.
MBRS3200T3G
MBRS3200T3G by Onsemi is a Schottky rectifier diode with a max output current of 3A and a max forward voltage of 0.59V. It operates in temperatures ranging from -65°C to 175°C, making it suitable for power applications. The diode has a peak repetitive reverse voltage of 200V and is designed for surface mount installation in electronic circuits.
C1206F104K5RACTU
KEMET Corporation
C1206F104K5RACTU by KEMET: Ceramic capacitor with 0.1uF capacitance, 50V URdc, X7R temp code. SMT package style for surface mount applications. Operating range -55 to 125 °C, with 10% tolerance.
C0805C104M5RACTU
C0805C104M5RACTU by KEMET Corporation is a ceramic capacitor with a capacitance of 0.1 uF and a rated DC voltage of 50 V. It has a temperature coefficient of 15% and can operate at temperatures ranging from -55 to 125 °C. This surface mount capacitor is commonly used in electronic circuits for filtering and energy storage purposes.
CL10A226MO7JZNC
Samsung Electro-mechanics
Samsung Electro-mechanics CL10A226MO7JZNC is a ceramic capacitor with 22uF capacitance and 16V rated DC voltage. It has X5R temperature characteristics, -55 to 85 °C operating range, and SMT package style. Ideal for applications requiring compact surface mount capacitors with stable performance in a wide temperature range.
C3216X5R0J107M160AB
TDK
TDK C3216X5R0J107M160AB is a ceramic capacitor with 100uF capacitance and 6.3V rated DC voltage. It has X5R temperature characteristics, -55 to 85°C operating range, and 20% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
GRT188R61H105KE13D
Murata Manufacturing
Murata Manufacturing's GRT188R61H105KE13D is a ceramic capacitor with 1uF capacitance, X5R temperature characteristics, and 50V rated DC voltage. It is used in surface mount applications for automotive electronics due to its AEC-Q200 standard compliance and compact SMT package design.
C1608X7R1C105K080AC
TDK C1608X7R1C105K080AC is a 0603 SMT ceramic capacitor with 1uF capacitance, 16V URdc, X7R temp characteristics. Ideal for surface mount applications in electronics due to its compact size, high operating temperature of 125°C, and low temperature coefficient of 15 ppm/°C.
GRM155R71C104KA88D
Murata Manufacturing's GRM155R71C104KA88D is a ceramic capacitor with 0.1uF capacitance and 16V rated DC voltage. It has X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for surface mount applications in electronics requiring stable capacitance over a wide temperature range.
CC0402KRX5R6BB105
Yageo
Yageo's CC0402KRX5R6BB105 is a 1uF ceramic capacitor with X5R temperature coefficient, suitable for SMT mounting. It has a 10% tolerance, operates b/w -55 to 85°C, and rated at 10V. Ideal for compact electronic devices requiring stable capacitance in a small form factor.
M39006/22-0639
Nissei Electric
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 86 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (DRY/SOLID);
VJ0402Y103KXXCW1BC
Vishay Bc Components
CERAMIC CAPACITOR; Mounting Feature: SURFACE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 25 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
GRM21BR61A106KE19L
Murata Manufacturing's GRM21BR61A106KE19L is a ceramic capacitor with 10uF capacitance, 10% tolerance, and X5R temperature characteristics. It operates b/w -55 to 85°C, ideal for surface mount applications in various electronic devices requiring stable capacitance at different temperatures.
M39006/22-0345
TANTALUM CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: 10 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: TANTALUM (WET);
CC0805KRX7R9BB102
Yageo CC0805KRX7R9BB102 is a ceramic capacitor with 0.001uF capacitance and 50V URdc. With X7R temp characteristics, it operates b/w -55 to 125 °C. Ideal for SMT applications due to its rectangular package shape and matte tin terminal finish.
LMK105BJ105KV-F
Taiyo Yuden
LMK105BJ105KV-F by Taiyo Yuden is a ceramic capacitor with 1uF capacitance and 10V rated DC voltage. It has a temperature coefficient of 15% and operates b/w -55°C to 85°C. Ideal for surface mount applications requiring compact, high-performance capacitors with a negative tolerance of 10%.
CL10B473KB8NNNC
CL10B473KB8NNNC by Samsung Electro-mechanics is a ceramic capacitor with 0.047uF capacitance and 50V rated DC voltage. It has a compact size of 1.6mm x 0.8mm x 0.9mm, making it suitable for surface mount applications in various electronic devices due to its X7R temperature characteristics and -55°C to 125°C operating temperature range. The capacitor's multi-layer design and wraparound terminals ensure reliable performance in diverse circuit configurations with a ±10% tolerance level.
GCM21BR71C475KA73L
Murata Manufacturing's GCM21BR71C475KA73L is a ceramic capacitor with 4.7uF capacitance, rated at 16V. It has X7R temperature characteristics and operates b/w -55 to 125 °C. Ideal for automotive applications meeting AEC-Q200 standard.
06035C102JAT2A
KYOCERA AVX
06035C102JAT2A by KYOCERA AVX is a SMT ceramic capacitor with capacitance of 0.001uF and rated DC voltage of 50V. It has X7R temperature characteristics, -55 to 125 °C operating range, and 5% tolerance. Ideal for applications requiring compact size, high reliability, and stable performance in various electronic circuits.
Vishay Intertechnology's VJ0402Y103KXXCW1BC is a ceramic capacitor with 0.01uF capacitance and 25V rated DC voltage. It features X7R temperature characteristics, -55 to 125°C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
CK05BX104K
Cornell Dubilier Electronics
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
C0805C104K5RAC7411
KEMET C0805C104K5RAC7411 is a ceramic capacitor with 0.1uF capacitance and 50V rated DC voltage. It has X7R temperature characteristics, -55 to 125 °C operating range, and ±10% tolerance. Ideal for SMT applications requiring compact size and reliable performance in various electronic circuits.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
SA105E104MAR
SA105E104MAR by KYOCERA AVX is a ceramic capacitor with capacitance of 0.1uF and rated DC voltage of 50V. It has negative tolerance of 20% and temperature coefficient range of -56 to +22%. Ideal for applications requiring stable performance in temperatures ranging from 10°C to 85°C.
SA105E104MARC
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .1 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 85 Cel; Dielectric Material: CERAMIC;
SA105C104KAR
SA101C102KAM
CERAMIC CAPACITOR; Capacitance: .001 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Packing Method: TR;
SA101C332KAR
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .0033 uF; Rated DC Voltage (URdc): 100 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
SA102A330JAA
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .000033 uF; Rated DC Voltage (URdc): 200 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
SA105C103KAD
CERAMIC CAPACITOR; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Temperature Characteristics Code: X7R;
SA105C103KAE
CERAMIC CAPACITOR; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Package Style (Meter): Axial;
SA105C103KAF
CERAMIC CAPACITOR; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Length: 4.32 mm;
SA105C103KAG
SA105C103KAI
SA105C103KAJ
SA105C103KAM
SA105C103KAN
CERAMIC CAPACITOR; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC; Diameter: 2.54 mm;
SA105C103JAR
CERAMIC CAPACITOR; Mounting Feature: THROUGH HOLE MOUNT; Capacitance: .01 uF; Rated DC Voltage (URdc): 50 V; Maximum Operating Temperature: 125 Cel; Dielectric Material: CERAMIC;
SA105C103MAR
SA105C103KAA
SA105C103KAC
SA105C103MAA
SA105C103MAC
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved