Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX LP0805A1747ASTR is a LOW PASS FILTER with 4 terminals. It offers 30 dB attenuation at min frequency of 3495 MHz and 20 dB at max frequency of 5242.5 MHz. Ideal for applications requiring impedance of 50 OHM, such as RF communication systems.
Median Price
$1.708
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Nova Conductors
1+ parts
$1.167
100+ parts
-
1k+ parts
10k+ parts
Bristol Electronics
$2.249
$1.394
$0.843
ACDS - Activité Composants Distribution Service
Dan-Mar Components
Vyrian
Continental Prestige Electronics
$1.143
Argo Parts USA
Netroflash
Ampacity Inc.
$1.400
AZTECH Wire
$13.942
RC Electronics
$1.330
$1.260
$1.230
Having 4 terminals allows for more flexibility in connections and applications.
Low pass filters are effective in removing high-frequency noise and interference, making this product suitable for applications where such filtering is necessary.
The high attenuation at the maximum frequency ensures that signal integrity is maintained by reducing noise and interference.
With a high maximum operating temperature, this product can withstand a wide range of environmental conditions.
The low minimum attenuation frequency ensures effective filtering of unwanted signals starting from a relatively low frequency.
Matte tin finish provides good conductivity and corrosion resistance, ensuring reliable connections.
With high attenuation at the maximum frequency, this product can effectively filter out unwanted signals at high frequencies.
Compact width makes this filter suitable for applications where space is limited.
Low insertion loss ensures minimal signal degradation when passing through the filter.
The specified cut-off frequency indicates the range of frequencies that are passed through the filter, meeting specific filtering requirements.
A low VSWR value indicates good matching of impedance, reducing signal reflection and ensuring efficient signal transmission.
Standard 50 ohm impedance for compatibility with other components and systems.
Compact length for space-saving installation in electronic circuits or systems.
Consistent impedance matching for reliable signal transfer between components.
The product can handle a substantial input power level, suitable for demanding applications.
Convenient packaging method for automated assembly processes.
Surface mount technology enables easy and secure installation on circuit boards.
Compact dimensions for versatile placement and integration in electronic devices or systems.
High attenuation at the minimum frequency ensures effective filtering of unwanted signals across a wide frequency range.
Low profile height allows for flexible placement in compact spaces.
General Purpose Electronic Filters LP0805A1747ASTR attributes and parameters. Explore more General Purpose Electronic Filters devices from KYOCERA AVX
Maximum Attenuation Frequency:
Minimum Attenuation Frequency:
Attenuation At Maximum Frequency:
Attenuation At Minimum Frequency:
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Dimensions:
Terminal Finish:
Voltage Standing Wave Ratio:
Width (mm):
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
1N4148
Invensys Sensor Systems
RECTIFIER DIODE; Surface Mount: NO; No. of Phases: 1; Maximum Reverse Recovery Time: .004 us; Config: SINGLE; Maximum Repetitive Peak Reverse Voltage: 100 V;
2N2222A
Boca Semiconductor
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BAV99
Plessey Semiconductors Discrete Components Div
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM555CM
Renesas Electronics
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
SS14
General Instrument
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
Bharat Electronics
1N4148WS
Jiangsu Changjiang Electronics Technology
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
SMBJ18CA
Onsemi
TRANS VOLTAGE SUPPRESSOR DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1552200253
Molex
WIRE AND CABLE;
LL4148
Bkc Semiconductors
RECTIFIER DIODE; Terminal Position: END; Terminal Form: WRAP AROUND; No. of Terminals: 2; Surface Mount: YES; Package Shape: ROUND;
SBAV99LT1G
SBAV99LT1G by Onsemi is a rectifier diode with a max repetitive peak reverse voltage of 100V. It has a small outline package style and a fast max reverse recovery time of 0.006 us. It is commonly used in applications requiring low power dissipation and high operating temperatures.
EU2B-YS303C
Idec
ROTARY SWITCH;
ROHM
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 250 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .6 A;
USB2514BI-AEZG
Standard Microsystems
BUS CONTROLLER, UNIVERSAL SERIAL BUS; Temperature Grade: INDUSTRIAL; Terminal Form: NO LEAD; No. of Terminals: 36; Package Code: HVQCCN; Package Shape: SQUARE;
1N4148WT
Diodes Incorporated
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LM358M
National Semiconductor
OPERATIONAL AMPLIFIER; Temperature Grade: COMMERCIAL; Terminal Form: GULL WING; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR;
LM317T
Sgs-ates Componenti Electronici S P A
Other Regulators; No. of Terminals: 3; JESD-609 Code: e0; Terminal Position: SINGLE; Adjustability: ADJUSTABLE; Maximum Load Regulation (%): 1.5 %;
BSS138
Calogic
N-CHANNEL; Configuration: SINGLE; Surface Mount: YES; Maximum Power Dissipation (Abs): .36 W; Terminal Finish: Tin/Lead (Sn/Pb); Maximum Drain Current (Abs) (ID): .2 A;
OPA2277UA/2K5E4
Texas Instruments
OPA2277UA/2K5E4 by Texas Instruments is a dual operational amplifier with low-offset and micropower features. It has a max input offset voltage of 100uV, nominal common mode reject ratio of 140dB, and min slew rate of 0.8V/us. Ideal for industrial applications requiring precise signal amplification in compact designs.
NE555/D
General Electric Solid State
Analog Waveform Generation Functions; Temperature Grade: COMMERCIAL; Maximum Operating Temperature: 70 Cel; Technology: BIPOLAR; Package Equivalence Code: DIE OR CHIP; Qualification: Not Qualified;
HMC1044LP3ETR
Analog Devices
Analog Devices' HMC1044LP3ETR is a 16-terminal low pass filter with 50 Ohm input/output impedance, operating from -40 to 85 °C. It features matte tin finish, surface mounting type, and dimensions of L3.1xB3.1xH1.0 mm. Ideal for general purpose electronic filtering applications in various industries.
BPF2400
Infinite Electronics International
BPF2400 by Infinite Electronics International is a 2448 MHz Band Pass Filter with N FEMALE connectors. It operates b/w -40°C to 85°C, handling up to 50W of power. Ideal for applications requiring general purpose electronic filtering in a panel mount setup.
MLPF-WB-01D3
STMicroelectronics
General Purpose Filters;
MBC2-0915-025SA
Api Technologies
MBC2-0915-025SA by Api Technologies is a BAND PASS FILTER with 23 dB attenuation at 837.5 MHz. Operating b/w -30 to 85 °C, it has a max insertion loss of 2.6 dB and impedance of 50 OHM. Ideal for electronic applications requiring precise frequency filtering in compact spaces.
ACFF-1024-BLK
Broadcom
BAND PASS FILTER; No. of Terminals: 5; Package Material: PLASTIC; Mounting Type: SURFACE MOUNT;
LP2816A0512SNTR
KYOCERA AVX
LOW PASS FILTER; Terminal Finish: Tin (Sn) - with Nickel (Ni) barrier; JESD-609 Code: e3;
HMC898LP4ETR
Analog Devices' HMC898LP4ETR is a 24-terminal BAND PASS FILTER with a center frequency of 16500 MHz and input/output impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for electronic applications requiring precise signal filtering in compact spaces.
HMC882ALP5ETR
Analog Devices' HMC882ALP5ETR is a 32-terminal LOW PASS FILTER with SMA connectors, operating from -40 to 85 °C. It offers a frequency range of 0-6900 MHz, VSWR of 1.58, and input/output impedance of 50 OHM. Ideal for general purpose electronic filtering in various applications.
1400BP41A0550E-AEC
Johanson Technology
BAND PASS FILTER;
HMC892LP5E
Analog Devices' HMC892LP5E is a 32-terminal BAND PASS FILTER with 8 dB Max Insertion Loss and 4000 MHz Center Frequency. Ideal for applications requiring a compact, surface-mountable filter with an operating temperature range of -40 to 85°C.
ACPF-7005-TR1
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; Center/Cutoff Frequency (fo/fc): 1882.5 MHz; Maximum Insertion Loss: 3.5 dB; Average Input Power: 1 W; Minimum Operating Temperature: -10 Cel;
HMC882ALP5E
Analog Devices' HMC882ALP5E is a LOW PASS FILTER with 32 terminals, operating from -40 to 85 °C. It offers a frequency range of 0-6900 MHz, VSWR of 1.58, and input/output impedance of 50 OHM. Ideal for applications requiring precise signal filtering in electronic systems.
BP0EA4649A700
LP0DA1890A700
LP0DA1890A700 by KYOCERA AVX is a LOW PASS FILTER with 16 terminals, operating b/w -55 to 85 °C. It has a Center Frequency of 1890 MHz, VSWR of 1.62, and input impedance of 50 OHM. Ideal for applications requiring filtering at high frequencies in compact electronic devices.
DEA166200BT-2356A3
TDK
DEA166200BT-2356A3 by TDK is a 3-terminal BAND PASS FILTER with 6200 MHz Center Frequency, 2.1 dB Max Insertion Loss, and -40 to 90 °C Operating Temp. Ideal for electronic applications requiring high-frequency filtering in compact spaces.
ACPF-8241-TR1
ADMV8818SCCZ-EP-R2
Analog Devices' ADMV8818SCCZ-EP-R2 is a 56-terminal high pass filter with a cutoff frequency of 10 GHz. Operating b/w -55 °C to 105°C, it has an input/output impedance of 50Ω. Ideal for general purpose electronic filtering applications, this surface mount device measures 9.15mm x 9.15mm x 1.03mm and comes in tape and reel packaging (TR).
ADAQ8088BBCZ
Analog Devices' ADAQ8088BBCZ is a LOW PASS FILTER with 84 terminals, operating from -40 to 85°C. Featuring a Center Frequency of 36 MHz, it has an Input Impedance of 249 OHM//1 pF. Ideal for general purpose electronic filtering applications in surface mount configurations.
RHP-92+
Mini-circuits
RHP-92+ by Mini-circuits is an 8-terminal high pass filter with a center frequency of 92 MHz and attenuation of 20 dB at 65 MHz. It operates b/w -40 to 85°C, has a VSWR of 1.2, and can handle up to 0.5 W input power. Ideal for general purpose electronic filtering applications requiring a surface mount solution.
LTC6602IUF#PBF
LTC6602IUF#PBF by Analog Devices is a 24-terminal BAND PASS FILTER with operating temperatures from -40 to 85°C. With dimensions of L4.0xB4.0xH0.75 mm, it's ideal for surface mount applications in general purpose electronic filters.
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
LP0805H3500ASTR
LP0805H3500ASTR by KYOCERA AVX is a LOW PASS FILTER with 4 terminals, 50 OHM impedance, and 3500 MHz cutoff frequency. It operates b/w -40 to 100 °C and has a max insertion loss of -0.85 dB. Ideal for surface mount applications in electronic devices requiring high-frequency filtering.
American Technical Ceramics
LOW PASS FILTER; Average Input Power: 8 W; Center/Cutoff Frequency (fo/fc): 3500 MHz; Output Impedance (ohm): 50 OHM; Length: 2.03 mm; Maximum Operating Temperature: 100 Cel;
LP0805A1119ASTR
LOW PASS FILTER; Mounting Type: SURFACE MOUNT; Dimensions: L2.03XB1.55XH1.02 (mm)/L0.08XB0.061XH0.04 (inch); Minimum Attenuation Frequency: 2238 MHz; Height: 1.02 mm; Output Impedance (ohm): 50 OHM;
LP0805A1890ASTR
LOW PASS FILTER; Maximum Insertion Loss: .4 dB; Height: 1.02 mm; Length: 2.03 mm; Center/Cutoff Frequency (fo/fc): 1890 MHz; Dimensions: L2.03XB1.55XH1.02 (mm)/L0.08XB0.061XH0.04 (inch);
LP0805A1960ASTR
LOW PASS FILTER; Maximum Insertion Loss: .4 dB; JESD-609 Code: e3; Terminal Finish: Matte Tin (Sn); Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM;
LP0805A1747AWTR
LOW PASS FILTER; JESD-609 Code: e0; Mounting Type: SURFACE MOUNT; No. of Terminals: 4; Attenuation At Maximum Frequency: 20 dB; Maximum Attenuation Frequency: 5242.5 MHz;
LP0805A1842AWTR
LOW PASS FILTER; JESD-609 Code: e0; Mounting Type: SURFACE MOUNT; Dimensions: L2.03XB1.55XH1.02 (mm)/L0.08XB0.061XH0.04 (inch); Height: 1.02 mm; Impedance (Input): 50 OHM;
LP0805A1880AWTR
LOW PASS FILTER; Average Input Power: 3 W; Voltage Standing Wave Ratio: 1.7; Maximum Attenuation Frequency: 5640 MHz; Maximum Insertion Loss: .4 dB; Center/Cutoff Frequency (fo/fc): 1880 MHz;
LP0805A1890AWTR
LOW PASS FILTER; Center/Cutoff Frequency (fo/fc): 1890 MHz; Attenuation At Maximum Frequency: 20 dB; Mounting Type: SURFACE MOUNT; Packing Method: TAPE AND REEL; Length: 2.03 mm;
LP0805A1960AWTR
LOW PASS FILTER; Attenuation At Minimum Frequency: 30 dB; Width (mm): 1.55; Mounting Type: SURFACE MOUNT; Center/Cutoff Frequency (fo/fc): 1960 MHz; Impedance (Input): 50 OHM;
LP0805A1119AWTR
LOW PASS FILTER; Width (mm): 1.55; Height: 1.02 mm; Center/Cutoff Frequency (fo/fc): 1119 MHz; Mounting Type: SURFACE MOUNT; Dimensions: L2.03XB1.55XH1.02 (mm)/L0.08XB0.061XH0.04 (inch);
LP0805A1119AS
LOW PASS FILTER; Maximum Operating Temperature: 85 Cel; Output Impedance (ohm): 50 OHM; Minimum No. of Sections: 1; Height: 1.02 mm; Maximum Insertion Loss: .4 dB;
LP0805A1950ASTR
LOW PASS FILTER; No. of Terminals: 4; Voltage Standing Wave Ratio: 1.7; Packing Method: TR; Width (mm): 1.55; Height: 1.02 mm;
LOW PASS FILTER; Minimum No. of Sections: 1; Length: 2.03 mm; Minimum Operating Temperature: -40 Cel; Output Impedance (ohm): 50 OHM; Impedance (Input): 50 OHM;
LP0805A1747AS
LOW PASS FILTER; Length: 2.03 mm; Impedance (Input): 50 OHM; Minimum Operating Temperature: -40 Cel; Width (mm): 1.55; Height: 1.02 mm;
LP0805A1890AS
LOW PASS FILTER; Average Input Power: 3 W; Packing Method: TR; No. of Terminals: 4; Maximum No. of Sections: 1; Terminal Finish: Tin (Sn);
LP0805A1907AS
LOW PASS FILTER; Voltage Standing Wave Ratio: 1.7; Mounting Type: SURFACE MOUNT; Terminal Finish: Tin (Sn); Average Input Power: 3 W; Packing Method: TR;
LP0805A1960AS
LOW PASS FILTER; No. of Terminals: 4; Width (mm): 1.55; Maximum Insertion Loss: .4 dB; Average Input Power: 3 W; Center/Cutoff Frequency (fo/fc): 1960 MHz;
LP0805A1842AS
LOW PASS FILTER; Output Impedance (ohm): 50 OHM; Length: 2.03 mm; Height: 1.02 mm; Maximum Insertion Loss: .4 dB; Average Input Power: 3 W;
LP0805A1880AS
LOW PASS FILTER; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT; JESD-609 Code: e3; Maximum Insertion Loss: .4 dB; Average Input Power: 3 W;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved