Active filters amplify desired signals while rejecting unwanted frequencies, and can be tailored to meet application-specific requirements in electronics.
Amplifiers boost signal strength, match impedance levels, and are essential in many circuit systems, including audio, broadcasting, and telecommunications.
Batteries store and provide electrical energy, come in various types and sizes for multiple uses, rechargeable or single-use.
Capacitors store electrical charge with metallic plates and a dielectric; types vary and can be combined for specific circuit characteristics.
Chip carriers and sockets provide an interface between components and PCBs, enabling easy replacement or upgrading without soldering.
Circuit protection devices prevent damage from overcurrent flow, including fuses, breakers, surge protectors, and voltage regulators.
Connector accessories and support devices aid connector function and longevity, including backshells, grips, clamps, and ties; must be compatible with connector type.
Connectors join electronic circuits to transfer signals and power, come in various sizes and shapes, and include support accessories.
Converters transform DC input to another voltage level, essential in electronic systems, renewable energy, and automotive electronics.
Crystals and resonators generate and stabilize frequency signals via piezoelectricity. They are used in timing, frequency control, and filters. Crystals are quartz and resonators are ceramic with a built-in capacitor.
Semiconductor diodes control current flow in one direction (uni-directionality) via low resistance. Useful for rectification, voltage regulation, detection, and digital logic.
Discover essential electronic components for your devices, including CPU accelerators, system cache controllers, computer processors, motherboards, and graphics computing systems. Enhance device performance and connectivity with reliable components engineered for seamless integration and optimal functionality.
Fiber optics use light pulses to transmit data over long distances. They have superior bandwidth capacity, low signal attenuation, and secure physical properties. They are essential in telecommunications networks today.
Filters enhance signal processing by selectively passing desired frequencies while suppressing unwanted ones. Filters can be passive (using capacitors, resistors, and inductors) or active (using transistors or amplifiers).
Flash devices are non-volatile storage solutions that offer fast read and write speeds, making them ideal for applications requiring high-speed data transfer. These devices utilize flash memory technology, providing reliable storage for data-intensive tasks such as gaming, multimedia, and enterprise-level applications.
General purpose ICs consist of multiple individual circuits or components (e.g., logic gates, amplifiers, oscillators, etc.) that are combined onto a single integrated circuit chip for a smaller physical footprint.
I/O and storage controllers are crucial components in computer systems, managing input/output operations and storage devices. These controllers facilitate efficient data transfer between peripherals, storage drives, and the central processing unit (CPU), enhancing system performance and enabling seamless connectivity.
Inductors store energy in magnetic fields, oppose sudden changes in current flow and prevent electrical surges. Common inductor applications include power supplies, signal filters, and oscillators.
Interface ICs allow efficient device connectivity with high-speed data transfer and low power consumption.They can be ASIC or FPGA types, and may perform additional functions such as sensing, storage, and conversion.
Logic ICs can be used for storage, memory, amplification, and multiplexing. They perform fundamental logical operations on digital input signals (1, 0, H, L) to generate a corresponding digital output signal.
Memory modules are essential components in electronic devices, storing data temporarily or permanently for processing and retrieval. From volatile RAM (Random Access Memory) to non-volatile ROM (Read-Only Memory), memory technologies vary in speed, capacity, and functionality, catering to diverse application requirements.
Memory ICs store digital data and retain the information even when the power is turned off. They come in various types, like RAM (Random Access Memory) for fast data access, and ROM (Read-Only Memory) for permanent data storage.
Miscellaneous semiconductor components are a diverse category of electronic components that combines elements from a mix of component devices.
Optoelectronic devices interact with light. This family of devices can emit light, detect light, generate current, and transmit light signals for long-distance communication.
Oscillators generate repetitive waveforms, such as sine, square, or triangle waves. They are commonly used to produce stable and precise frequencies for applications like clocks, signal generation, and communication systems.
Other Function Semiconductor components are a diverse category of semiconductor components that perform a range of specialized functions.
Passive component networks operate without a power source and support data transmission within system by performing filtering, energy storage, and/or signal coupling functions.
Peripheral ICs (Integrated Circuits) are designed to control and manage the peripheral devices connected to a computer or other electronic device.
Programmable Logic ICs are user-programmable devices that allow designers to create custom logic circuits. These cost saving ICs offer real-time data processing and maximum design flexibilty.
RF (Radio Frequency) and microwave devices are used in telecommunications, wireless communications, and electronic systems. These devices include amplifiers, attenuators, filters, mixers, oscillators, and antennas, and a host of other components.
Voltage regulators are used to ensure a constant output voltage despite power fluctuations and load changes. Linear and switching regulators are common types used to maintain voltage stability.
Relays are electromagnetic switches that are used to control the flow of electrical current in an electrical circuit. Relays are a safe means of providing isolation between a controlling circuit and a controlled circuit.
Resistors control the flow of electrical current in a circuit by introducing a set resistance. These passive components reduce current flow, adjust signal levels, and bias active elements in circuits.
Transducers convert energy from one form to another and are crucial in sensing, audio and control systems. They transform physical measures like temperature, pressure, or sound into electrical signals for circuits.
Storage drives are hardware devices used to store and retrieve digital data in computers and electronic devices. These drives come in various forms, including hard disk drives (HDDs), solid-state drives (SSDs), and hybrid drives, offering different levels of capacity, speed, and durability to suit specific storage needs.
Storage media encompass physical or digital mediums used for storing and preserving digital data. From optical discs and magnetic tapes to USB flash drives and memory cards, storage media come in diverse formats and capacities, offering flexibility and reliability for data storage and archival purposes.
Storage systems comprise hardware and software components designed to manage and store digital data efficiently. These systems range from simple standalone devices to complex network-attached storage (NAS) and storage area network (SAN) solutions, providing scalable storage capacity and data protection features for businesses and enterprises.
Switches control electrical current flow by making or breaking connections. These devices vary in design and application, from basic on/off switches to complex industrial automation systems.
Telecom integrated circuits (ICs) are specialized electronics for telecommunications, tailored to high data rates, low power use, and reliable long-distance transmission. These devices include amplifiers, filters, ADCs, DACs, and more-- and they are often integrated on one chip for specific telecom tasks.
Terminal blocks, or connection terminals, are modular blocks that bring together multiple electrical wires at one connection point. They offer a reliable, organized way to terminate cables.
Thermal management devices control heat in electronic systems, preventing overheating and ensuring optimal performance and reliability. Examples include heat sinks, fans, and thermal interface materials that dissipate or transfer heat away from components.
Transformers are devices that alter electrical voltage levels between circuits through electromagnetic induction. They are vital in power distribution, converting high-voltage electricity for transmission and lower voltage for safe usage.
Transistors are 3-layer semiconductor devices that regulate the flow of electrical current. They function as amplifiers, boosting weak signals, and as switches, controlling the flow of current between terminals.
Triggering devices initiate electronic processes or events in response to specific conditions. These devices support many automated tasks such as activating switches and signals, or turning on lights when motion is detected.
Video cards, also known as graphics cards or GPU (Graphics Processing Unit), are essential components in computers, responsible for rendering graphics and images on display devices. These cards feature dedicated processors and memory, delivering smooth and immersive visual experiences for gaming, multimedia, and professional applications.
Choose from over than a million of proven quality materials. Over 300 manufacturers are presented. From renowned major international players to small independent companies with a proven track record in local markets.
Featured manufacturers
KYOCERA AVX's HF0BA0950A700 is a 19-terminal high pass filter with center frequency of 1475 MHz. It offers low insertion loss of 1.2 dB and can handle up to 2W input power. Ideal for applications requiring impedance matching in electronic circuits, this surface mount filter operates b/w -55°C to 85°C temperature range.
Median Price
$23.400
Lifecycle Status
Suppliers In-Stock
5
In-Stock Inventory
1k+
Mouser Electronics
1+ parts
$26.500
100+ parts
$18.590
1k+ parts
$16.120
10k+ parts
-
Verical
Chip1Stop
$20.300
Vyrian
Nova Conductors
Ampacity Inc.
$10.630
Continental Prestige Electronics
Aranea Global
Argo Parts USA
With 19 terminals, this filter offers versatile connectivity options, making it suitable for a variety of applications.
High pass filters are ideal for passing high-frequency signals while attenuating low-frequency signals, making this product suitable for applications requiring high-frequency filtering.
The high maximum operating temperature of 85°C ensures that this filter can perform reliably even in demanding environmental conditions.
The low minimum operating temperature of -55°C allows this filter to operate effectively in a wide range of temperature conditions.
Gold terminal finish provides excellent conductivity and corrosion resistance, ensuring reliable and long-lasting connections.
The compact width of 3.98mm makes this filter suitable for applications where space is limited.
The low maximum insertion loss of 1.2 dB ensures minimal signal attenuation, making this filter suitable for applications where signal integrity is crucial.
With a center/cutoff frequency of 1475 MHz, this filter is suitable for high-frequency signal filtering and processing.
The 50 ohm input impedance ensures compatibility with standard signal sources and enhances signal transmission efficiency.
The length of 7.79mm provides a balanced design for the filter, ensuring optimal performance and signal filtering capabilities.
The 50 ohm output impedance ensures proper matching with output devices, reducing signal reflections and ensuring efficient signal transmission.
With an average input power of 2W, this filter is capable of handling moderate power levels, making it suitable for a wide range of applications.
Waffle pack packaging method provides convenient storage and handling of multiple filters, making it suitable for high-volume production and deployment.
Surface mounting type allows for easy and secure installation on PCBs, making this filter suitable for compact and space-constrained applications.
The 50 ohm I/O impedance ensures proper matching with input and output devices, maintaining signal integrity and efficient signal transmission.
The low height of 0.559mm allows for a compact and space-saving design, making this filter suitable for applications where size constraints are a concern.
General Purpose Electronic Filters HF0BA0950A700 attributes and parameters. Explore more General Purpose Electronic Filters devices from KYOCERA AVX
Average Input Power:
Center/Cutoff Frequency (fo/fc):
Filter Type:
Height:
Impedance (Input):
I/O Impedance:
Maximum Insertion Loss:
JESD-609 Code:
Length:
Mounting Type:
Maximum No. of Sections:
Minimum No. of Sections:
No. of Terminals:
Maximum Operating Temperature:
Minimum Operating Temperature:
Output Impedance (ohm):
Packing Method:
Terminal Finish:
Width (mm):
KYOCERA AVX is a leading global manufacturer of advanced electronic components engineered to accelerate technological innovation and build a better future. As a wholly owned subsidiary of KYOCERA Corporation structured to capitalize on shared resources and technical expertise, KYOCERA AVX has an expansive global footprint comprised of several dozen research, development, and manufacturing facilities spanning more than 15 countries and staffed with talented personnel dedicated to innovation, component quality, customer service, and enabling a brighter future through technology. KYOCERA AVX designs, develops, manufactures, and supplies advanced capacitors, antennas, connectors, circuit protection and timing devices, sensors, controls, filters, fuses, diodes, resistors, couplers, and inductors optimized for employment in the international 5G, IoT, aerospace, automotive, consumer electronics, industrial, medical, and military markets.
350766-1
TE Connectivity
TE Connectivity 350766-1 is a rectangular power connector with 0.25" mating contact pitch, rated for 600V and operating temperatures from -55 to 105°C. It has a durable design with POLYAMIDE insulator material, suitable for commercial applications requiring secure crimp termination in cable mounting setups.
BAV99
Temic Semiconductors
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: GULL WING; No. of Terminals: 3; Surface Mount: YES; Package Shape: RECTANGULAR;
LM2931AZ-5.0G
Onsemi
LM2931AZ-5.0G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 5V and max output current of 0.1A. It has a max dropout voltage of 0.6V, making it suitable for applications requiring stable power supply in temperature-sensitive environments up to 125°C. The package style is cylindrical with wire terminals, ideal for rail packing methods in various electronic devices.
SS14
Hy Electronic
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: C BEND; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
LP2950CDT-3.3G
LP2950CDT-3.3G by Onsemi is a fixed positive single output LDO regulator with a nominal output voltage of 3.3V and max output current of 0.1A. It has a small outline package style, operates at temperatures ranging from -40 to 125 °C, and is suitable for applications requiring low dropout voltage and precise voltage regulation in electronic circuits.
ST3485EBDR
STMicroelectronics
ST3485EBDR by STMicroelectronics is a Line Driver & Receiver with 3.3V power supply, EIA-422/EIA-485 interface standard, and 30ns max transmit delay. It is ideal for industrial applications requiring differential output and operates in temperatures ranging from -40 to 85°C.
2N7002
Rectron
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Operating Mode: ENHANCEMENT MODE; Maximum Operating Temperature: 150 Cel; Terminal Form: GULL WING;
BAT54SLT1G
BAT54SLT1G by Onsemi is a fast recovery Schottky diode with 2 elements in series connected configuration. It has a max reverse recovery time of 0.005 us and a max forward voltage of 0.8 V. Ideal for applications requiring high-speed rectification, it operates b/w -55 to 150 °C and can handle a max output current of 0.2 A.
FT232RL-REEL
FTDI
FTDI's FT232RL-REEL is a bus controller with 28 terminals, operating at 3.3V to 5.25V. It supports USB, VBUS, and UART buses with a data transfer rate of 60MBps. Ideal for industrial applications due to its CMOS technology and compatibility with RS232, RS422, and RS485 standards.
NE555D
Fairchild Semiconductor
PULSE; RECTANGULAR; Temperature Grade: COMMERCIAL; No. of Terminals: 8; Package Code: SOP; Package Shape: RECTANGULAR; Surface Mount: YES;
2N2222A
Semiconductor Technology
NPN; Configuration: SINGLE; Surface Mount: NO; Nominal Transition Frequency (fT): 300 MHz; Maximum Power Dissipation (Abs): .5 W; Maximum Collector Current (IC): .8 A;
BSS138
Jiangsu Changjiang Electronics Technology
N-CHANNEL; Configuration: SINGLE WITH BUILT-IN DIODE; Surface Mount: YES; Package Style (Meter): SMALL OUTLINE; Maximum Drain Current (ID): .22 A; Package Shape: RECTANGULAR;
EU2B-YS3103F
Idec
ROTARY SWITCH;
LM555CM
Texas Instruments
LM555CM by Texas Instruments is an Analog Waveform Generation IC with a supply voltage range of 4.5V to 16V and max operating temperature of 70°C. It comes in a small outline package, suitable for applications requiring pulse generation or rectangular waveform outputs. With surface mount capability and low supply current of 15mA, it is ideal for commercial-grade electronic circuits.
SS495ASP
Micro Switch
The Micro Switch SS495ASP is an analog circuit IC with a supply voltage range of 4.5V to 10.5V, suitable for automotive applications. Its package body material is plastic/epoxy, and it has a rectangular shape with three terminals. Operating temperature ranges from -40°C to 125°C, making it ideal for various automotive sensor and control systems.
RN41N-I/RM
Microchip Technology
Microchip Technology's RN41N-I/RM is a telecom IC with 35 terminals, operating from -40 to 85°C. It has a supply voltage of 3.3V and is surface mountable in industrial applications. The package style is rectangular, measuring 13.2mm x 20.1mm with a seated height of 2.2mm, suitable for telecom interface functions.
1N4148WT
Good-ark Electronics
RECTIFIER DIODE; Terminal Position: DUAL; Terminal Form: FLAT; No. of Terminals: 2; Surface Mount: YES; Package Shape: RECTANGULAR;
1N4148
Won-top Electronics
RECTIFIER DIODE; Terminal Position: AXIAL; Terminal Form: WIRE; No. of Terminals: 2; Surface Mount: NO; Package Shape: ROUND;
Tak Cheong Electronics Holdings
LM107H/883
Advanced Micro Devices
OPERATIONAL AMPLIFIER; Temperature Grade: MILITARY; Terminal Form: WIRE; No. of Terminals: 8; Package Shape: ROUND; Low-Offset: NO;
SP000435408
Broadcom
BAND PASS FILTER; Width (mm): 1.6; Center/Cutoff Frequency (fo/fc): 1575.42 MHz; Impedance (Input): 50 OHM; Height: .6 mm; Output Impedance (ohm): 50 OHM;
ACPF-7024
BAND PASS FILTER; No. of Terminals: 3; Length: 2 mm; Maximum Insertion Loss: 3.5 dB; JESD-609 Code: e4; Maximum Operating Temperature: 85 Cel;
ACPF-8440-TR1
BAND PASS FILTER;
B148QF0S
Knowles Precision Devices
B148QF0S by Knowles Precision Devices is a surface mount band pass filter with a center frequency of 15 GHz and an insertion loss of 4.2 dB. It has a temperature range of -55 to 125°C and is commonly used in general purpose electronic applications.
DEA160960LT-5044C1
TDK
DEA160960LT-5044C1 by TDK is a LOW PASS FILTER with 6 terminals, operating from -40 to 85 °C. It has a Center Frequency of 829.5 MHz, Insertion Loss of 0.9 dB, and Input/Output Impedance of 50 OHM. Ideal for surface mount applications in electronic devices requiring high-frequency filtering.
XLF-252+
Mini-circuits
XLF-252+ by Mini-circuits is a low pass filter with 1.6 dB max insertion loss and 3220 MHz cutoff frequency. Ideal for applications requiring 50 OHM impedance, it operates b/w -55 to 105 °C, with VSWR of 1.3.
HMC893LP5E
Analog Devices
Analog Devices' HMC893LP5E is a 32-terminal BAND PASS FILTER with a Center Frequency of 7150 MHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for RF applications requiring a compact surface mount filter with an average power handling of 0.01W.
ACPF-7005
BAND PASS FILTER; Minimum Operating Temperature: -10 Cel; Output Impedance (ohm): 50 OHM; Maximum Operating Temperature: 85 Cel; Length: 2 mm; Maximum Insertion Loss: 3.5 dB;
HMC895LP4E
Analog Devices' HMC895LP4E is a 24-terminal band pass filter with a center frequency of 9700 MHz and input impedance of 50 ohms. Operating b/w -40°C to 85°C, it handles average power of 0.0063W. Ideal for electronic applications requiring precise signal filtering in compact spaces.
HMC881ALP5E
Analog Devices' HMC881ALP5E is a 32-terminal LOW PASS FILTER with SMA connectors, operating from -40 to 85 °C. With a frequency range of 0-4000 MHz and VSWR of 1.35, it's ideal for general purpose electronic filtering in surface mount applications.
LP0BA1390A700
KYOCERA AVX
LP0BA1390A700 by KYOCERA AVX is a LOW PASS FILTER with 16 terminals, operating from -55 to 85 °C. It has a Center Frequency of 1390 MHz, VSWR of 1.21, and input impedance of 50 OHM. Ideal for applications requiring a compact surface mount filter with a power rating of 4 W in the frequency range up to 1390 MHz.
LP0805H3500ASTR
LP0805H3500ASTR by KYOCERA AVX is a LOW PASS FILTER with 4 terminals, 50 OHM impedance, and 3500 MHz cutoff frequency. It operates b/w -40 to 100 °C and has a max insertion loss of -0.85 dB. Ideal for surface mount applications in electronic devices requiring high-frequency filtering.
HMC897LP4E
Analog Devices' HMC897LP4E is a 24-terminal BAND PASS FILTER with a Center Frequency of 14 GHz and Input Impedance of 50Ω. Operating b/w -40°C to 85°C, it's ideal for RF applications requiring precise filtering in compact spaces due to its small dimensions (L4.1xB4.1xH1.0 mm).
BP0CA1100A700
BP0CA1100A700 by KYOCERA AVX is a 23-terminal BAND PASS FILTER with a center frequency of 1100 MHz and max insertion loss of 5 dB. Operating b/w -55°C to 85°C, it has gold terminal finish and is ideal for electronic applications requiring a compact surface mount filter with an impedance of 50 OHM.
LTC1069-6IS8#TRPBF
LTC1069-6IS8#TRPBF by Analog Devices is an 8-terminal LOW PASS FILTER with a max frequency of 0.02 MHz. Operating temp range: -40 to 85 °C. Ideal for general purpose electronic filtering in surface mount applications.
ACPF-8041-BLK
BAND PASS FILTER; Maximum Operating Temperature: 85 Cel; No. of Terminals: 3; Minimum No. of Sections: 1; Maximum Insertion Loss: 1.8 dB; Output Impedance (ohm): 50 OHM;
ACPF-7141-BLK
BAND PASS FILTER; No. of Terminals: 3; Additional Features: OTHER BAND OF FREQ ALSO AVAILABLE; Maximum Operating Temperature: 85 Cel; Length: 2 mm; Width (mm): 1.6;
LTC6602CUF#PBF
LTC6602CUF#PBF by Analog Devices is a 24-terminal BAND PASS FILTER with operating temp range of 0-70 °C. It has matte tin finish, dimensions of L4.0xB4.0xH0.75 mm, and is surface mountable. Ideal for general purpose electronic filtering applications due to its compact size and temperature range suitability.
BP0FA1190A7TR\250
BP0FA1190A7TR\250 by KYOCERA AVX is a BAND PASS FILTER with 31 terminals. It has a center frequency of 1190 MHz and max insertion loss of 5 dB. This filter is used in general purpose electronic applications requiring a narrow frequency range.
ACPF-8241-TR1
Partstack™ will investigate all reported instances of potential suspect/counterfeit part listings.
HF0BA0850A700
HIGH PASS FILTER; Terminal Finish: Gold (Au); Length: 7.79 mm; Height: .559 mm; Maximum No. of Sections: 1; Mounting Type: SURFACE MOUNT;
HF0BA0930A700
HIGH PASS FILTER; Impedance (Input): 50 OHM; Output Impedance (ohm): 50 OHM; Length: 7.79 mm; Center/Cutoff Frequency (fo/fc): 1275 MHz; Height: .559 mm;
HF0BA0850A7TR/250
HIGH PASS FILTER; No. of Terminals: 19; Impedance (Input): 50 OHM; Mounting Type: SURFACE MOUNT; Maximum No. of Sections: 1; Output Impedance (ohm): 50 OHM;
HF0BA0850A7TR
HIGH PASS FILTER; Output Impedance (ohm): 50 OHM; Height: .559 mm; Maximum Insertion Loss: 1.2 dB; Average Input Power: 2 W; Mounting Type: SURFACE MOUNT;
HF0BA0930A7TR
HIGH PASS FILTER; Height: .559 mm; Width (mm): 3.98; Maximum Insertion Loss: 1.2 dB; Packing Method: TR; Maximum Operating Temperature: 85 Cel;
HF0BA0930A7TR/250
HIGH PASS FILTER; Output Impedance (ohm): 50 OHM; Minimum Operating Temperature: -55 Cel; Mounting Type: SURFACE MOUNT; JESD-609 Code: e4; Width (mm): 3.98;
HF0BA0950A7TR
HIGH PASS FILTER; Width (mm): 3.98; Height: .559 mm; Minimum Operating Temperature: -55 Cel; Center/Cutoff Frequency (fo/fc): 1475 MHz; Maximum Operating Temperature: 85 Cel;
HF0BA0950A7TR/250
HIGH PASS FILTER; Minimum Operating Temperature: -55 Cel; Terminal Finish: Gold (Au); Height: .559 mm; Length: 7.79 mm; Width (mm): 3.98;
Supply Digital Components
$106.00
$54.25
$11.90
$7.29
Quantity
12,000 In-Stock
Total price ≈ $80,197.29
© 2023 All rights reserved